
Sponge Inlet Filter
Large Filter
Operating the vacuum
1. Insert the power plug into the electrical outlet.
2. Turn on the appliance by pressing the power switch.
3. Start vacuuming, please keep the head brush touch the floor.
4. Turn off the appliance by pressing the power switch again.
Tip: For high-power appliances, the temperature of the motor is higher than that of other parts
during use, which is normal. Our product features overheat protection, so no need to worry.
Note: Always remove the power plug from the electrical outlet before assembling or removing
accessories.
Tip: Please make sure power supply under correct voltage.
There are some small holes on the sponge filter pad to strengthen the cleaning efficiency and
contribute to powerful suction, however, they are easily blocked by some dust, sands, crumbs,
or other granular garbage. To keep the suction power of your vacuum cleaner, we kindly
suggest cleaning the sponge filter regularly with fresh water after being used for a period of time.
Generally, it is better to exchange the filter every three months according to your use frequency
and situation.
Warm Prompt:
Totally air-dry the filter after cleaned, then install it back to the place.
This would lead to deformation or other damage beyond repair to the filter.