York STELLAR 2000 EFD Series Quick start guide

036-21030-003 Rev. B (0203)
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
TECHNICAL GUIDE
STELLAR 2000
TM
10 SEER
SPLIT-SYSTEM HEAT PUMPS
MODELS:
E*FD018 Thru E*FD060
(1.5 THRU 5 NOMINAL TONS, 1 PH )
E*FD036 Thru E*FD060
(3 THRU 5 NOMINAL TONS, 3 PH )
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at www.york.com for the most
up-to-date technical information.
Additional rating information can be found at
www.ari.org
U
NI
T
A
R
Y
HE
A
T
P
U
M
P
T
E
Q
U
I
P
M
E
N
R
S
EC
T
I
O
N
S
A
T
I
O
N
E
RT
I
F
I
C
C
OF
D
ST
A
N
D
A
R
I
A
R
2
4
0
M
A
NU
F
A
CT
U
R
E
R
C
E
R
T
I
F
I
E
D
C
L
Y
OM
P
I
N
G
T
O
A
R
IA
S
LISTED
This product was manufactured
in a plant whose quality system
is certified/registered as being
in conformity with ISO 9001.
Certification applies only
when the complete
system is listed
with RI.
®
DESCRIPTION
The EFD Series heat pump is the outdoor part of a versatile sys-
tem designed to economically heat and cool a home or small busi-
ness. The compact design of these outdoor units make them ideal
for ground or roof installation. They are available with sweat con-
nect field piping connections. These units have service valves and
contain enough refrigerant charge for the outdoor unit, a matching
indoor coil and 15 feet of interconnecting piping.
EFD heat pumps may be custom-matched with one of YORK's
indoor line of evaporator blower sections, each designed to serve
a specific function. Electric heaters are available for both single
and three phase applications, in a variety of sizes.
For Add-On applications, the indoor coil may be applied in the
supply duct of a conventional gas, oil or electric furnace. The heat
pump will be the primary source of heat for the building with the
furnace operating only when the heating requirement exceeds the
capacity of the heat pump.
WARRANTY
5-year lim ited parts warranty.
5-year limited co
mpressor warranty.
FEATURES
•QUALITY CONDENSER COILS - The coil is constructed of
enhanced copper tube and aluminum fins.
•COIL PROTECTION - Coils are protected from damage by a
polymer mesh applied between the coil face, and a PVC coated
steel coil guard.
•DEFROST CONTROL - Time / Temperature defrost control
provides field selectable time periods between defrost cycles
(30, 60 and 90 minutes). LED lockout indicator, anti-short cycle
timer protection are also provided. A built-in soft lockout helps
to avoid nuisance trips on high pressure.
•PROTECTED COMPRESSOR - The compressor is internally
protected against high pressure and temperature. This is
accomplished by the simultaneous operation of high pressure
relief valve and a temperature sensor which protect the com-
pressor if undesirable operating conditions occur. All units have
standard crankcase heat for added protection (except 048 and
060, since they are scroll compressors).
•DURABLE FINISH - Cabinet is made of pre-painted steel. The
pre-treated flat galvanized steel provides a better paint to steel
bond, which resists corrosion and rust creep. Special primer
formulas and glossy earth tone finish insure less fading when
exposed to sunlight.
•LOWER INSTALLED COST - Installation time and costs are
reduced by the fully exposed refrigerant connections and the
single panel covering of the electrical controls. The small base
dimension means smaller mounting pads or less materials
required for mounting, thus lowering installation costs.
•TOP DISCHARGE - The air from the top mounted fan is blown
up away from the structure and any landscaping. This allows
space saving arrangements of multi-unit installations.
•LOW OPERATING SOUND LEVEL - The upward air flow car-
ries the normal operating noise up and away from the living
area. The rigid top panel effectively isolates any motor sound.
Isolator mounted compressor and the rippled fins of the con-
denser coil muffle the normal fan motor and compressor oper-
ating sounds. A compressor blanket accessory is available for
those applications requiring further sound reduction.
•LOW MAINTENANCE - Long life permanently lubricated
motor- bearings need no annual servicing.
•RE-USABLE SERVICE VALVES - Provided on all sweat fit-
tings on both the liquid and vapor connections for ease of evac-
uating.
•U.L. and C.U.L. listed - approved for outdoor application.
Certified in accordance with the Unitary Small Equipment certifica-
tion program, which is based on ARI Standard 210/240.

036-21030-003 Rev. B (0203)
2Unitary Products Group
PHYSICAL AND ELECTRICAL DATA - 1 Phase
MODEL
E4FD018 E4FD024 E4FD030 E4FD036 E4FD042 E4FD048 E4FD060
Unit Supply Voltage 208/230-1-60
Normal Voltage Range
1
187 to 252
Minimum Circuit Ampacity 11.3 15.4 19.4 23.2 27.2 33.1 39.2
Max. Overcurrent Device Amps
2
20 25 30 35 40 50 60
Compressor Type
3
Recip Recip Recip Recip Recip Scroll
C
Scroll
B
Compressor Amps Rated Load 6.7 11.6 14.8 17.3 20.5 25.2 29.9
Locked Rotor 48 60 73 86 120 131 165
Crankcase Heater Yes Yes Yes Yes Yes No No
Fan Motor Amps Rated Load 0.9 0.9 0.9 1.6 1.5 1.6 1.8
Fan Diameter Inches 18 18 18 18 24 24 24
Fan Motor
Rated HP 1/8 1/8 1/8 1/4 1/4 1/4 1/3
Nominal RPM 1075 1075 1075 1100 860 860 1100
Nominal CFM 2050 2050 2050 2200 3200 3200 4100
Coil
Face Area Sq. Ft. 14.1 14.1 14.1 14.1 20 20 24
RowsDeep 1111111
Fin / Inches 13 13 13 16 13 16 16
Liquid Line OD 3/8 3/8 3/8 3/8 3/8 3/8 3/8
Vapor Line OD 5/8 5/8 3/4 3/4 7/8 7/8 7/8
Unit Charge (Lbs. - Oz.)
4
4 - 11 4 - 12 5 - 3 5 - 11 7 - 6 7 - 6 9 - 5
ChargePerFoot,Oz. 0.680.680.680.680.700.700.70
Operating Weight Lbs. 158 162 168 173 225 210 246
PHYSICAL AND ELECTRICAL DATA - 3 Phase
MODEL
E4FD036 E4FD048 E4FD060 E4FD036 E4FD048 E4FD060
25 46
Unit Supply Voltage 208/230 - 3 - 60 460 - 3 - 60
Normal Voltage Range
1
187 TO 253 432 TO 504
Minimum Circuit Ampacity 15.2 20.1 25.0 8.0 9.0 11.4
Max. Overcurrent Device Amps
2
25 30 40 15 15 15
Compressor Type
3
Recip Scroll
C
Scroll
B
Recip Scroll
C
Scroll
B
Compressor Amps Rated Load 10.9 14.8 18.5 5.8 6.5 8.3
Locked Rotor 78 91 125 40 46 67
Crankcase Heater Yes No No Yes No No
Fan Motor Amps Rated Load 1.6 1.6 1.8 0.8 0,8 1.0
Fan Diameter Inches 18 24 24 18 24 24
Fan Motor
Rated HP 1/4 1/4 1/3 1/4 1/4 1/3
Nominal RPM 1100 860 1100 1075 860 1100
Nominal CFM 2200 3200 4100 2200 3200 4100
Coil
Face Area Sq. Ft. 14.1 20 24 14.1 20 24
RowsDeep 111111
Fin / Inches 16 16 16 16 16 16
Liquid Line OD 3/8 3/8 3/8 3/8 3/8 3/8
Vapor Line OD 3/4 7/8 7/8 3/4 7/8 7/8
Unit Charge (Lbs. - Oz.)
4
5 - 11 7 - 6 9 - 5 5 - 11 7 - 6 9 - 5
Charge Per Foot, Oz. 0.68 0.70 0.70 0.68 0.70 0.70
Operating Weight Lbs. 173 210 246 173 210 246
1. Rated in accordance with ARI Standard 110, utilization range “A”.
2. Dual element fuses or HACR circuit breaker.
3. All scrolls listed with a superscript “B” are Bristol scrolls. All scrolls listed with a superscript “C” are Copeland scrolls.
4. The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than
15 feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.

036-21030-003 Rev. B (0203)
Unitary Products Group 3
PROCEDURES:
1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaportor and for 15 feet of interconnecting line
tubing.
2. Verify the orifice size and additional charge required for specific evaportor coil in the system using the above table.
3. Additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in the table above.
4. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for
evaportor + adder for line set.
5. If the orifice in the evaportor was change
Additional R-22 Charge / Orifice Size for Various Matched Systems - 1 & 3 Phase
OUTDOOR UNIT E4FD018 E4FD024 E4FD030 E4FD036 E4FD042 E4FD048 E4FD060
Orifice in OD Distributor 37 45 51 59 67 76 76
FACTORY CHARGE, LBS. - OZ. 4-11 4-12 5-3 5-11 7-6 7-6 9-5
ID Orifice included w/Instruction Package 53 61 67 75 78, 81 84, 87 93
INDOOR COIL COIL ORIFICE
1
REQUIRED SYSTEM ORIFICE + ADDITIONAL CHARGE, OZ.
G1FA/G1UA024S14, 17 59 53+2 - - - - - -
G1FA/G1UA030S14 65 53+5 61+0 - - - - -
G1FA/G1UA036S14 73 - 61+2 67+0 - - - -
G1FA/G1UA036S17 73 - - 67+5 - - - -
G1FA/G1UA048S17 84 - - - 75+3 81+5 84+0 -
G1FA/G1UA048S21 84 - - - 75+5 81+5 84+0 -
G1FA/G1UA060S21, 24 90 - - - - - 87+7 93+0
G2FD024(S,H)14, 17 61 53+5 61+0 - - - - -
G2FD030(S,H)17 65 - 61+2 67+0 - - - -
G2FD035(S,H)14 65 - 61+2 67+0 - - - -
G2FD036(S,H)17, 21 75 - - 67+5 75+0 - - -
G2FD042(S,H)21 78 - - 75+1 78+0 - -
G2FD046(S,H)17 78 - - - 75+3 78+0 - -
G2FD048(S,H)21, 24 84 - - - - 81+5 84+2 -
G2FD060(S,H)24 90 - - - - - 87+4 93+0
G2FD061SH24 90 - - - - - - 93+8
G1HD024 59 53+5 61+1 - - - - -
G1HD036 69 - - 67+5 75+0 - - -
G1HD048 81 - - - - 78+2 87+0 -
G1HD060 93 - - - - 81+9 87+0 93+8
F2RP/FP018 53 53+0 - - - - - -
F2RP/FP024 61 53+4 61+0 - - - - -
F2RP/FP030 65 - 61+2 67+0 - - - -
F2RP/FP036 75 - - 67+5 75+0 - - -
F2RP/FP042 78 - - - 75+3 78+0 - -
F2FP048 84 - - - - 81+5 84+2 -
F2FP060 90 - - - - - - 93+0
REFRIGERANT LINE ADDER OZ. / FT. 0.66 0.66 0.68 0.68 0.68 0.70 0.70
FOOTNOTES:
1. These orifices are factory mounted in the flow control device of each indoor coil.

036-21030-003 Rev. B (0203)
4Unitary Products Group
- = Not applicable
COOLING CAPACITY - With Air Handler Coils
UNIT
MODEL
AIR HANDLER
COIL MODEL
1
COOLING
MODEL ELECTRIC
HEAT KW
2
WRATED
CFM
NET MBH SEER
W/O TXV
SEER
+ TXV
3
EER
TOTAL SENS.
1 and 3 Phase 10 SEER HP / N1AH / G2FD
E4FD018 N1AHB08 2,5,7.5,10 17 G2FD024(S,H)17 650 18.4 13.8 11.00 --- 9.10
E4FD024 N1AHB08 2,5,7.5,10 17 G2FD024(S,H)17 800 23.0 17.3 10.45 --- 9.15
N1AHB08 5,7.5,10,15,18 17 G2FD030(S,H)17 800 23.4 17.6 10.50 --- 9.40
E4FD030 N1AHB12 5,7.5,10,15,18 17 G2FD030(S,H)17 1000 29.0 21.8 10.50 --- 9.40
N1AHB12 5,7.5,10,15,18 17 G2FD036(S,H)17 1025 29.4 22.1 11.00 --- 9.40
E4FD036
N1AHB12 5,7.5,10,15,18 17 G2FD036(S,H)17 1220 35.0 26.3 10.00 --- 9.20
N1AHB12 5,7.5,10,15,18 17 G2FD042(S,H)17 1220 35.4 26.6 10.20 --- 9.15
N1AHB12 5,7.5,10,15,18 17 G2FD046(S,H)17 1220 35.4 26.6 10.20 --- 9.15
E4FD042 N1AHC16 5,7.5,10,15,20 21 G2FD042(S,H)21 1400 40.5 30.0 10.00 --- 9.15
N1AHC16 5,7.5,10,15,20 21 G2FD048(S,H)21 1425 41.5 30.7 10.10 --- 9.25
E4FD048
N1AHC16 5,7.5,10,15,20,25,30 21 G2FD048(S,H)21 1600 45.5 33.7 10.50 --- 9.40
N1AHD20 5,7.5,10,15,20,25,30 24 G2FD048(S,H)24 1600 45.5 33.7 10.50 --- 9.40
N1AHD20 5,7.5,10,15,20,25,30 24 G2FD060(S,H)24 1625 47.0 34.8 10.80 --- 9.65
E4FD060 N1AHD20 5,7.5,10,15,20,25,30 24 G2FD060(S,H)24 1800 59.0 44.0 11.00 --- 9.90
1 and 3 Phase 10 SEER HP / N1VS / G2FD
E4FD018 N1VSB12 5,7.5,10,15,18 17 G2FD024(S,H)17 650 19.0 14.3 12.00 --- 10.30
E4FD024 N1VSB12 5,7.5,10,15,18 17 G2FD024(S,H)17 800 23.6 17.7 11.70 --- 10.20
N1VSB12 5,7.5,10,15,18 17 G2FD030(S,H)17 850 24.0 18.0 11.80 --- 10.65
E4FD030 N1VSB12 5,7.5,10,15,18 17 G2FD036(S,H)17 1025 30.0 22.5 11.60 --- 9.30
N1VSB12 5,7.5,10,15,18 17 G2FD030(S,H)17 1025 29.0 21.8 11.30 --- 9.40
E4FD036
N1VSB12 5,7.5,10,15,18 17 G2FD036(S,H)17 1200 35.6 26.7 10.80 --- 9.50
N1VSB16 5,7.5,10,15,20 17 G2FD036(S,H)21 1200 35.6 26.7 11.00 --- 9.70
N1VSB12 5,7.5,10,15,18 17 G2FD046(S,H)17 1200 36.2 27.2 11.00 --- 9.80
N1VSC16 5,7.5,10,15,20 21 G2FD042(S,H)21 1225 36.2 27.2 11.20 --- 10.00
E4FD042 N1VSC16 5,7.5,10,15,20 21 G2FD048(S,H)21 1425 42.0 31.1 11.00 --- 10.00
E4FD048 N1VSC16 5,7.5,10,15,20 21 G2FD048(S,H)21 1600 46.0 34.0 11.00 --- 10.00
N1VSD20 7.5,10,15,20,25,30 24 G2FD060(S,H)24 1625 48.0 35.5 12.00 --- 10.60
E4FD060 N1VSD20 7.5,10,15,20,25,30 24 G2FD060(S,H)24 1800 60.0 45.0 11.50 --- 11.20
1 and 3 Phase 10 SEER HP / F2RP / FP / FV
4,5
E4FD018 F2RP/F2FP018 2,5,8 18 --- 650 17.5 13.0 10.70 --- 9.80
F2RP/F2FP024 5,8,10,(10),(15) 18 --- 650 18.8 14.0 10.50 --- 10.45
E4FD024 F2RP/F2FP024 5,8,10,(10),(15) 18 --- 800 22.6 17.0 10.40 --- 9.40
F2RP/F2FP030 5,8,10,15,(10),(15) 18 --- 800 23.2 17.4 10.70 --- 9.50
E4FD030 F2RP/F2FP030 5,8,10,15,(10),(15) 18 --- 1050 29.0 21.8 10.50 --- 9.3
F2RP/F2FP036 5,8,10,15,(10),(15) 18 --- 1050 29.4 22.1 11.00 --- 9.4
E4FD036 F2RP/F2FP036 5,8,10,15,(10),(15) 18 --- 1200 34.2 25.7 10.00 --- 8.90
F2RP/F2FP042 5,8,10,15,(10),(15) 21 --- 1200 35.0 26.3 10.20 --- 9.20
E4FD042 F2RP/F2FP042 5,8,10,15,(10),(15) 21 --- 1500 40.5 30.0 10.00 --- 9.40
F2FP048 10,15, 20, 25, (10),(15) 24 --- 1450 41.5 30.7 10.30 --- 9.65
E4FD048 F2FP048 10,15, 20, 25, (10),(15) 24 --- 1650 46.0 34.0 10.00 --- 9.40
E4FD060 F2FP060 10,15, 20, 25, (10),(15) 24 --- 1800 57.5 43.1 10.00 --- 9.60
F2FV060 10,15, 20, 25, (10),(15) 24 --- 1800 59.0 44.2 11.00 --- 10.50
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210/240.
Cooling MBH based on 80°F entering air temperature, 50% RH, and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTU’s at a 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total electric power
input in watt-hours during the same period.
1. G2FD coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. Single phase units require single phase 2HK heaters.
3. TXV = Use 1TV700 Series Kit.
4. To meet R=4.2 insulation requirements, substitute F2FP for F2RP, and F2FC for F2RC
. models. All ratings remain the same.
5. FG8, FG9, and FL8 furnaces and F2RP / F2FP/F2FV air handlers have B.O.D (Blower on Delay) standard.

036-21030-003 Rev. B (0203)
Unitary Products Group 5
COOLING CAPACITY - Upflow, Downflow, & Horizontal Furnaces and Coils
UNIT MODEL
FURNACE**
COIL
MODEL
COOLING
CFM RANGE
(MIN.-MAX.) WRATED CFM
NET MBH SEER
W/O TXV
1
SEER + TXV
1
EER
TOTAL SENS.
E4FD018S06 575
725
14,17 G1FA024S14,17 650 18.5 13.8 10.20 - 10.20
14 G1FA030S14 650 19.0 14.1 10.70 - 10.50
14,17 G1UA024S14,17 650 18.5 13.7 10.50 - 10.20
14 G1UA030S14 650 19.0 14.1 10.70 - 10.50
- G1HD024 650 18.8 14.0 10.50 - 10.45
14,17 G2FD024(S,H)14,17 650 18.8 14.0 10.50 - 10.35
17 G2FD030(S,H)17 650 19.0 14.1 10.50 - 10.50
E4FD024S06 750
950
14 G1FA030S14 850 23.0 17.7 10.00 - 9.15
17,21 G1FA036S17,21 850 23.4 18.0 10.30 - 9.65
14 G1UA030S14 850 23.0 17.7 10.00 - 9.15
17,21 G1UA036S17,21 850 23.4 18.0 10.30 - 9.65
- G1HD024 800 23.0 17.7 10.00 - 9.45
14,17 G2FD024(S,H)14,17 800 23.0 17.7 10.00 - 9.15
17 G2FD030(S,H)17 850 23.4 18.0 10.30 - 9.65
17 G2FD036(S,H)17 850 23.4 18.0 10.25 - 9.35
E4FD030S06 900
1150
17,21 G1FA036S17,21 1025 29.0 21.8 10.50 - 9.30
17,21 G1UA036S17,21 1025 29.0 21.8 10.50 - 9.30
- G1HD036 1000 29.0 21.8 10.40 - 9.55
17 G2FD030(S,H)17 1025 29.0 21.8 10.50 - 9.30
14 G2FD035(S,H)14 1000 29.0 21.8 10.50 - 9.30
17 G2FD036(S,H)17 1025 29.4 22.1 11.00 - 9.40
21 G2FD036(S,H)21 1025 29.4 22.1 11.00 - 9.40
E4FD036S06 1050
1350
21,24 G1FA048S21 1250 35.6 26.7 10.30 - 9.20
21,24 G1UA048S21 1250 35.6 26.7 10.30 - 9.20
17,21 G2FD036(S,H)17,21 1200 35.0 26.3 10.00 - 8.90
21 G2FD042(S,H)21 1200 35.6 26.7 10.30 - 9.20
17 G2FD046(S,H)17 1200 35.6 26.7 10.30 - 9.20
E4FD036S25,46 1050
1350
21,24 G1FA048S21 1200 35.6 26.7 10.00 - 9.20
21,24 G1UA048S21 1200 35.6 26.7 10.00 - 9.20
17,21 G2FD036(S,H)17,21 1200 35.0 26.3 10.00 - 8.90
21 G2FD042(S,H)21 1200 35.6 26.7 10.00 - 9.20
17 G2FD046(S,H)17 1200 35.6 26.7 10.00 - 9.20
E4FD042S06 1275
1625
21,24 G1FA048S21 1450 41.5 30.7 10.50 - 9.70
21,24 G1UA048S21 1450 41.5 30.7 10.50 - 9.70
- G1HD048 1400 41.0 30.3 10.10 - 9.25
- G1HD060 1400 42.5 31.5 10.30 - 9.45
21 G2FD042(S,H)21 1400 40.5 30.0 10.00 - 9.15
17 G2FD046(S,H)17 1450 41.0 30.3 10.00 - 9.20
21,24 G2FD048(S,H)21,24 1450 41.5 30.7 10.10 - 9.25
24 G2FD060(S,H)24 1450 42.0 31.3 10.10 - 9.45
E4FD048S06 1400
1800
21,24 G1FA048S21 1600 46.0 34.0 10.70 - 9.45
21,24 G1FA060S21,24 1600 47.0 34.8 10.80 - 9.60
21,24 G1UA048S21 1600 46.0 34.0 10.70 - 9.45
21,24 G1UA060S21,24 1600 47.0 34.8 10.80 - 9.60
- G1HD048 1600 45.0 33.3 10.50 - 9.40
- G1HD060 1620 46.5 34.4 10.70 - 9.60
21,24 G2FD048(S,H)21,24 1600 45.5 33.7 10.50 - 9.40
24 G2FD060(S,H)24 1600 47.0 34.8 10.80 - 9.65
For Notes see Page 5.

036-21030-003 Rev. B (0203)
6Unitary Products Group
* Requires a 2FD Blower Time Delay unless a standard furnace is equipped with one.
** Refer to Quick Selection Chart for specific furnace match-up.
E4FD048S25,46 1400
1800
21,24 G1FA048S21 1600 46.0 34.0 10.70 - 9.45
21,24 G1FA060S21,24 1600 47.0 34.0 10.80 - 9.60
21,24 G1UA048S21 1600 46.0 34.0 10.70 - 9.45
21,24 G1UA060S21,24 1600 47.0 34.8 10.80 - 9.60
- G1HD048 1600 45.0 33.3 10.50 - 9.40
- G1HD060 1620 46.5 34.4 10.70 - 9.60
21,24 G2FD048(S,H)21,24 1600 45.5 33.7 10.50 - 9.40
24 G2FD060(S,H)24 1600 47.0 34.8 10.80 - 9.65
E4FD060S06 1600
2100
21,24 G1FA060S21,24 1800 58.5 43.3 10.50 - 9.90
21,24 G1UA060S21,24 1800 58.5 43.3 10.50 - 9.90
- G1HD060 1800 57.0 42.2 10.50 - 9.20
24 G2FD060S24 1800 59.0 43.7 11.00 - 9.90
E4FD060S25,46 1600
2100
21,24 G1FA060S21,24 1800 58.5 43.3 10.50 - 9.90
21,24 G1UA060S21,24 1800 58.5 43.3 10.50 - 9.90
- G1HD060 1800 57.0 42.2 10.50 - 9.20
24 G2FD060(S,H)24 1800 59.0 43.7 11.00 - 9.90
1. TXV = Use 1TV700 Series Kit.
COOLING CAPACITY - Upflow, Downflow, & Horizontal Furnaces and Coils (Continued)
UNIT MODEL
FURNACE**
COIL
MODEL
COOLING
CFM RANGE
(MIN.-MAX.) WRATED
CFM
NET MBH SEER
W/O TXV
1
SEER + TXV
1
EER
TOTAL SENS.
HEATING PERFORMANCE - With Air Handler and Multi-Position Coils
UNIT
MODEL
COIL
MODEL
1
ARI HEATING
2
OUTDOOR TEMP
3
47° F 17° F HSPF -3°F 7°F 17° F 27°F 37°F 47°F 57°F
MBH COP MBH COP STD VS MBH KW MBH KW MBH KW MBH MBH MBH KW MBH KW MBH KW
1 AND 3 PHASE HP / AIR HANDLERS & COILS
E4FD018
F2RP/F2FP018 17.6 3.00 10 2.00 7.10 -- 4.4 1.09 7.2 1.1 10 1.25 12.4 1.3 15 1.42 17.6 1.53 21 1.75
F2RP/F2FP024 17.8 3.10 10 2.00 7.10 -- 4.8 1.05 7.4 1.09 10 1.25 12.6 1.31 15.6 1.4 17.8 1.5 21.2 1.73
G2FD024(S,H)14, 17 18 3.06 9.9 2.00 7.10 7.2 5 1.02 7.6 1.1 9.9 1.23 12.8 1.32 15.6 1.38 18 1.52 22 1.72
E4FD024
F2RP/F2FP024 22.4 3.10 12.5 2.00 7.35 -- 6.1 1.5 9.3 1.6 12.5 1.75 15.6 1.92 18.8 2.02 22.4 2.13 27.1 2.23
F2RP/F2FP030 22.8 3.20 12.8 2.10 7.40 -- 6.3 1.55 9.4 1.68 12.8 1.68 16 1.9 19 2 22.8 2.14 27.7 2.3
G2FD024(S,H)14, 17 22.4 3.10 12.2 2.00 7.60 7.7 6.3 1.5 9.3 1.5 12.2 1.7 16 1.89 19.2 2.05 22.4 2.12 27 2.4
G2FD030(S,H)17 22.6 3.10 12.4 2.00 7.10 7.2 6.5 1.4 9.6 1.46 12.4 1.7 16 1.92 19 2.07 22.6 2.14 28 2.33
G2FD035(S,H)14 22.4 3.10 12.4 2.00 7.10 -- 6.6 1.5 9.8 1.6 12.4 1.7 16.2 1.9 19.2 2.06 22.4 2.15 28 2.3
E4FD030
F2RP/F2FP030 29 3.20 17 2.30 7.60 -- 10.4 2 13.8 2.1 17 2.23 21.2 2.35 24.8 2.48 29 2.58 34.2 2.68
F2RP/F2FP036 28.4 3.20 17.4 2.30 7.50 -- 10.2 1.95 13.6 2.11 17.4 2.22 22 2.37 24.8 2.5 28.4 2.57 34.6 2.69
G2FD030(S,H)17 29.2 3.20 17 2.30 7.60 7.8 10.4 2 13.8 2.18 17 2.21 21.8 2.4 25 2.6 29.2 2.58 34.2 3.7
G2FD035(S,H)14 29.2 3.20 17 2.30 7.60 -- 10.7 1.98 14 2.15 17 2.23 24 2.42 25.8 2.48 29.2 2.58 34.4 2.65
G2FD036(S,H)17, 21 29.2 3.20 17.4 2.30 7.60 7.7 10.8 2 14.2 2.11 17.4 2.22 24 2.4 25.6 2.48 29.2 2.54 34.6 2.67
E4FD036
F2RP/F2FP036 35.2 3.20 21 2.30 7.50 -- 10.8 2.5 15.4 2.63 21 2.8 24.8 2.95 28.4 3 35.2 3.26 43 3.47
F2RP/F2FP042 35.2 3.20 20 2.10 7.50 -- 10.8 2.5 15.6 2.6 20 2.6 25 2.94 28.6 3 35.2 3.2 43.2 3.4
G2FD042(S,H)21 35 3.20 20 2.10 7.40 7.6 10.8 2.2 15.4 2.62 20 2.6 25 2.76 28.8 2.95 35 3.2 43.2 3.45
G2FD046(S,H)17 35 3.20 20 2.10 7.40 7.6 10.8 2.2 15.8 2.6 20 2.7 25.2 2.76 28.8 2.95 35 3.2 44 3.46
G2FD036(S,H)17, 21 35.2 3.20 21 2.30 7.50 7.6 10.6 2.5 15.4 2.64 21 2.6 25 2.8 28.6 2.98 35.2 3.2 43 3.4
E4FD042
F2RP/F2FP042 39.5 3.20 22.6 2.20 7.4 - 11.7 2.50 17.2 2.76 22.6 3.00 28.0 3.26 33.9 3.50 39.5 3.62 48.7 4.01
F2FP048 40.5 3.30 23.8 2.28 7.5 - 13.1 2.60 18.5 2.84 23.8 3.10 29.1 3.28 35.0 3.50 40.5 3.60 49.8 4.00
G2FD042(S,H)21 39.0 3.24 23.2 2.2 7.4 - 13.4 2.81 18.3 2.95 23.2 3.09 28.1 3.23 33.6 3.39 39.0 3.53 46.7 3.76
G2FD046(S,H)17 39.0 3.28 23.2 2.20 7.4 - 13.0 2.80 18.1 2.92 23.2 3.10 28.3 3.26 33.8 3.40 39.0 3.46 47.8 3.80
G2FD048(S,H)21,24 39.5 3.40 23.4 2.28 7.4 7.5 13.1 2.50 18.2 2.67 23.4 2.90 28.6 3.04 34.2 3.20 39.5 3.31 48.6 3.60
E4FD048
F2FP048 47.0 3.30 28.0 2.3 7.8 - 15.7 3.16 21.8 3.36 28.0 3.57 34.2 3.77 40.9 4.00 47.0 4.17 56.1 4.50
G2FD048(S,H)21,24 47.0 3.50 28.0 2.32 8.0 8.0 16.1 3.30 22.1 3.40 28.0 3.50 33.9 3.67 40.7 3.80 47.0 3.96 54.8 4.20
G2FD060(S,H)24 47.0 3.46 28.0 2.32 8.0 8.0 16.1 3.3 22.0 3.41 28.0 3.50 34.0 3.67 40.7 3.80 47.0 3.94 54.9 4.10
E4FD060
F2FP060 61 3.30 39 2.40 8.20 -- 21.4 4.5 30.1 4.6 39 4.75 43 4.9 52.1 5.1 61 5.3 63 3.47
F2FV060 60 3.30 39 2.40 8.20 -- 21.1 4.3 31 4.7 39 4.8 43.2 4.91 52.3 5.09 60 5.25 63.2 3.4
G2FD060(S,H)24 60 3.40 39 2.40 8.50 8.5 21.1 4.4 26.2 4.6 38 4.7 43 4.85 51.8 5.1 60 5.3 63 3.45
1. Rated CFM same as for cooling.
2. Heating performance and efficiency is the same for TXV application. Heating MBH based on 70° DB entering indoor air, 72% RH outdoor air with 25
feet of interconnecting piping and no supplemental electric heat operation.
3. Integrated heating capacities include the effect of defrost cycles in the temperature range where they occur.

036-21030-003 Rev. B (0203)
Unitary Products Group 7
HEATING PERFORMANCE - With Furnace Coils
UNIT
MODEL COIL
1
ARI HEATING
2
OUTDOOR TEMP
3
47° F 17° F HSPF -3°F 7°F 17° F 27°F 37°F 47°F 57°F
MBH COP MBH COP STD VS MBH KW MBH KW MBH KW MBH MBH MBH KW MBH KW MBH KW
1 AND 3 PHASE EFD / UPFLOW FURNACE & COILS
E4FD018
G1HD024 18.2 3.08 9.9 2.00 7.1 - 4.3 1.25 7.1 1.35 9.9 1.45 12.7 1.55 15.5 1.65 18.2 1.73 21.5 1.79
G1FA024S17 18.0 3.00 9.9 2.00 7.1 - 4.4 1.23 7.2 1.34 9.9 1.45 12.6 1.56 15.5 1.67 18.0 1.76 21.6 1.88
G1UA024S17 18.0 3.00 9.9 2.00 7.1 - 4.4 1.23 7.2 1.34 9.9 1.45 12.6 1.56 15.5 1.67 18.0 1.76 21.6 1.88
G1FA030S14 18.2 3.06 9.9 2.00 7.1 - 4.3 1.25 7.1 1.35 9.9 1.45 12.7 1.55 15.5 1.65 18.2 1.74 21.5 1.81
G1UA030S14 18.2 3.06 9.9 2.00 7.1 - 4.3 1.25 7.1 1.35 9.9 1.45 12.7 1.55 15.5 1.65 18.2 1.74 21.5 1.81
E4FD024
G1HD024 22.0 3.00 12.2 2.00 7.5 - 5.8 1.55 9.0 1.67 12.2 1.8 15.4 1.91 18.6 2.03 22.0 2.15 26.7 2.30
G1FA030S14 22.0 2.94 12.2 2.00 7.6 - 5.8 1.51 9.0 1.65 12.2 1.79 15.4 1.93 18.6 2.06 22.0 2.19 26.7 2.35
G1UA030S14 22.0 2.94 12.2 2.00 7.6 - 5.8 1.51 9.0 1.65 12.2 1.79 15.4 1.93 18.6 2.06 22.0 2.19 26.7 2.35
G1FA036S17,21 22.4 3.00 12.4 2.00 7.1 - 5.9 1.57 9.1 1.69 12.4 1.82 15.7 1.94 18.9 2.07 22.4 2.19 27.2 2.33
G1UA036S17,21 22.4 3.00 12.4 2.00 7.1 - 5.9 1.57 9.1 1.69 12.4 1.82 15.7 1.94 18.9 2.07 22.4 2.19 27.2 2.33
E4FD030
G1HD036 29.6 3.36 18.3 2.36 7.8 - 10.9 2.03 14.6 2.5 18.3 2.27 22.0 2.39 26.0 2.51 29.6 2.58 35.4 2.75
G1FA036S17,21 29.2 3.20 17.0 2.30 8.0 - 10.2 1.99 13.9 2.11 17.5 2.23 21.1 2.35 23.7 2.41 28.4 2.55 33.1 2.72
G1UA036S17,21 29.2 3.20 17.0 2.30 8.0 - 10.2 1.99 13.9 2.11 17.5 2.23 21.1 2.35 23.7 2.41 28.4 2.55 33.1 2.72
E4FD036
G1HD036 36.4 3.28 20.4 2.38 7.4 - 9.7 2.01 15.1 2.26 20.4 2.51 25.7 2.77 29.7 2.95 36.4 3.25 44.6 3.56
G1FA048S21 35.0 3.2 20.0 2.10 7.4 - 8.9 1.93 14.7 2.21 20.4 2.49 26.1 2.77 30.0 2.97 37.0 3.29 44.8 3.62
G1UA048S21 35.0 3.2 20.0 2.10 7.4 - 8.9 1.93 14.7 2.21 20.4 2.49 26.1 2.77 30.0 2.97 37.0 3.29 44.8 3.62
E4FD042
G1HD048 39.5 3.32 23.4 2.28 7.4 - 13.0 2.60 18.2 2.81 23.4 3.01 28.6 3.21 34.2 3.39 39.5 3.49 48.3 3.84
G1HD060 39.5 3.36 23.4 2.28 7.4 - 13.1 2.63 18.3 2.82 23.4 3.01 28.5 3.20 34.2 3.36 39.5 3.45 48.5 3.77
G1FA048S21 39.5 3.40 23.4 2.34 7.4 - 12.8 2.68 18.1 2.84 23.4 3.01 28.7 3.20 32.8 3.27 40.0 3.49 48.2 3.74
G1UA048S21 39.5 3.40 23.4 2.34 7.4 - 12.8 2.68 18.1 2.84 23.4 3.01 28.7 3.20 32.8 3.27 40.0 3.49 48.2 3.74
E4FD048
G1HD048 47.0 3.48 28.0 2.32 8.0 - 13.3 2.73 18.4 2.87 23.4 3.01 28.4 3.13 34.2 3.31 39.5 3.45 46.3 3.65
G1HD060 47.0 3.46 28.0 2.32 8.0 - 16.1 3.23 22.0 3.39 28.0 3.54 34.0 3.69 40.7 3.85 47.0 3.98 54.9 4.18
G1FA048S17,21 47.0 3.42 28.0 2.30 8.0 - 15.1 3.24 21.5 3.40 28.0 3.57 34.5 3.73 39.1 3.83 47.0 4.03 56.0 4.27
G1UA048S17,21 47.0 3.42 28.0 2.30 8.0 - 15.1 3.24 21.5 3.40 28.0 3.57 34.5 3.73 39.1 3.83 47.0 4.03 56.0 4.27
G1FA060S24 47.0 3.46 28.0 2.32 8.0 - 15.1 3.21 21.5 3.37 28.0 3.54 34.5 3.70 39.1 3.79 47.0 3.98 56.0 4.21
G1UA060S24 47.0 3.46 28.0 2.32 8.0 - 15.1 3.21 21.5 3.37 28.0 3.54 34.5 3.70 39.1 3.79 47.0 3.98 56.0 4.21
E4FD060
G1HD060 60.0 3.10 38.0 2.40 8.2 - 18.1 4 26.2 4.5 38 4.95 43.1 4.9 52 5.1 60 3.25 72.1 5.9
G1FA060S21,24 61.5 3.40 39.0 2.40 8.2 - 18.2 4 26.5 4.4 39 4.98 43.2 4.85 52.1 5.2 61.5 3.26 73.1 5.95
G1UA060S21,24 61.5 3.40 39.0 2.40 8.2 - 18.2 4 26.5 4.4 39 4.98 43.2 4.85 52.1 5.2 61.5 3.26 73.1 5.95
1. Rated CFM same as for cooling.
2. Heating performance and efficiency is the same for TXV application. Heating MBH based on 70° DB entering indoor air, 72% RH outdoor air with 25 feet of
interconnecting piping and no supplemental electric heat operation.
3. Integrated heating capacities include the effect of defrost cycles in the temperature range where they occur.

036-21030-003 Rev. B (0203)
8Unitary Products Group
ACCESSORIES
Refer to Price Manual for specific model numbers.
Start Assist Kit (2SA067*)
Blower Time Delay - Available to increase efficiency when
installed. Installs on indoor section and maintains blower for
approximately one minute after cooling thermostat has been
satisfied.
Hard Start Kits - Provides required starting torque for use
with Thermal Expansion Valve Kit.
Low Temperature Cutout (2LT06700224) - Prevents heat
pump operation below -10°F ambient temperature.
Compressor Blanket - Designed to further reduce the nor-
mal operating sound.
Add-on Control (2AC02700701) - Provides interface for use
of gas and oil furnaces with the heat pump system.
Thermal Expansion Valve Kit - 1TV0700 Series TXV kit
used to improve system performance.
Outdoor Thermostat (2TD06700124) - Provides additional
staging of supplemental electric heat.
Room Thermostats - A wide selection of matching thermo-
stats is available to provide features required for any installa-
tion.
2H/1C, manual change-over electronic non-programmable
thermostat.
3H/2C, non-programmable digital thermostat.
3H/2C, auto/manual changeover, electronic programmable,
7-day, thermostat.
* For the most current accessory information, refer to the
price book or consult factroy.
SOUND RATINGS
All dimensions are in inches. They are subject to change without
notice. Certified dimensions will be provided upon request.
EFD
MODEL
SOUND RATING
DECIBELS*
018 73
024 74
030 74
036 76
1
1. Compressor Blanket Factory Installed.
*Rated in accordance with ARI Standard 270.
042 78
1
048 78
1
060 78
1
076 78
1
UNIT
MODEL
EFD
DIMENSIONS
REFRIGERANT
CONNECTION
LINE SIZE
ABC
LIQUID VAPOR
018 30-1/8 24 24
3/8
5/8
024 30-1/8 24 24
030 30-1/8 24 24 3/4
036 30-1/8 24 24
042 31-7/8 35 35
7/8048 31-7/8 35 35
060 37-7/8 35 35
48" OVERHEAD
CLEARANCE
C
B
A
5-1/2
2-3/8
3-1/8
VAPOR
CONNECTION
LIQUID CONNECTION
AIR IN
4 SIDES

036-21030-003 Rev. B (0203)
Unitary Products Group 9
TYPICAL INSTALLATION
TYPICAL FIELD WIRING - 1 Phase (Air Handler / Electrical Heat)
TYPICAL FIELD WIRING - 3 Phase (Air Handler / Electrical Heat)
THERMOSTAT
TO
INDOOR
BLOWER
TO COIL
NEC
CLASS 2
WIRING
NEC
CLASS 1
WIRING
TO
POWER
SUPPLY
WEATHERPROOF
DISCONNECT
SWITCH
Seal opening( ) with permagum
or equivalent
24” SERVICE ACCESS
CLEARANCE
48” OVERHEAD
CLEARANCE
12” REAR AND
SIDES
NOTE: All outdoor wiring mu t be weatherproof
THERMOSTAT
ALL WIRING TO BE ACCORDANCE WITH NATIONAL CODE AND/OR LOCAL CODES.
INDOOR UNIT OUTDOOR
UNIT
POWER WIRING
208/230-1-60
CONTACTOR
GND.
SCREW
T2 T1
L2 L1
M
CIRCUIT
BREAKER4
POWER WIRING
24V CONTROL WIRING
(NEC CLASS 2
GND.
LUG
LOW VOLTAGE TERMINAL BLOCK
IN AIR HANDLER WITH ELECTRIC HEAT
3,4
2
TERMINAL NOT USED ON ALL THERMOSTATS.
3
CHECK THE LOW VOLTAGE TERMINAL BLOCK
ON THE INDOOR UNIT FOR THE ACTUAL
ARRANGEMENT OF THE TERMINALS.
4
CONNECT POWER WIRING TO TERMINAL
BLOCK 3TB ON UNITS WITHOUT ELECTRIC
HEAT OR CIRCUIT BREAKER.
DEHUMIDIFICATION CONTROL
CONNECTION (”Humidistat” Jumper
must be removed .
7 WIRES
R
Y
O
W
G
R
C
Y
O
G
R
C
Y
O
W
X
W2
W1
BK
W1
BorC
LorX
M
T1
L1
L2
T2
T3
L3
INDOOR UNIT
OUTDOOR UNIT
CONTACTOR
GND.
LUG
POWER WIRING
POWER WIRING
208/230-3-60
460-3-60
GND.
SCREW
POWER
SUPPLY
208/230-3-60
460-3-60

036-21030-003 Rev. B (0203)
10 Unitary Products Group
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree belowthe listed temperature.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. E4FD018S06
INDOOR COIL MODEL NO. F2RP/F2FP018
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM 600 650 700
ID DB 85 80 75 70 85 80 75 70 85 80 75 70
ID WB 72 67 62 57 72 67 62 57 72 67 62 57
75
T.C. 22.3 20.4 18.6 17.0 22.4 20.6 18.8 17.2 22.6 20.7 18.9 17.4
S.C. 14.7 14.8 14.9 15.1 15.2 15.3 15.5 15.6 15.8 15.8 15.9 16.1
K.W 1.51 1.54 1.54 1.53 1.52 1.56 1.56 1.56 1.56 1.59 1.61 1.60
85
T.C. 21.0 19.2 17.4 15.9 21.2 19.3 17.5 16.1 21.3 19.4 17.6 16.3
S.C. 14.0 14.0 14.1 14.3 14.5 14.4 14.6 14.8 14.9 14.9 15.0 15.2
K.W 1.59 1.60 1.58 1.56 1.61 1.62 1.61 1.58 1.65 1.66 1.65 1.62
95
T.C. 19.4 17.6 15.9 14.6 19.5 17.8 16.0 14.8 19.7 17.9 16.1 14.9
S.C. 13.0 12.9 13.0 13.2 13.4 13.4 13.4 13.6 13.8 13.8 13.8 14.0
K.W 1.70 1.68 1.65 1.62 1.72 1.70 1.67 1.64 1.76 1.75 1.72 1.69
105
T.C. 17.6 15.7 14.2 12.7 17.6 16.0 14.3 12.9 17.8 16.1 14.4 13.3
S.C. 11.7 11.6 11.6 11.2 11.9 12.0 12.0 11.5 12.3 12.4 12.3 12.5
K.W 1.80 1.75 1.72 1.69 1.82 1.80 1.74 1.71 1.86 1.85 1.78 1.74
115
T.C. 15.8 13.8 12.5 10.8 15.7 14.2 12.6 11.0 15.9 14.3 12.7 11.7
S.C. 10.4 10.3 10.2 9.2 10.4 10.6 10.6 9.4 10.8 11.0 10.8 11.0
K.W 1.90 1.82 1.79 1.76 1.92 1.90 1.81 1.78 1.96 1.95 1.84 1.79
125
T.C. 14.0 11.9 10.8 8.9 13.8 12.4 10.9 9.1 14.0 12.5 11.0 10.1
S.C. 9.19.08.87.28.99.29.27.39.39.69.39.5
K.W 2.00 1.89 1.86 1.83 2.02 2.00 1.88 1.85 2.06 2.05 1.90 1.84
NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
N1AHB08 G2FD024(S,H)17 1.03 1.03 1.00
N1VSB12 G2FD024(S,H)17 1.07 1.07 1.00
F2RP/F2FP024 1.01 1.01 1.06
G1UA024S14 1.02 1.02 1.06
G1UA024S17 1.02 1.02 1.06
G2FD024(S,H)14 1.03 1.03 1.06
G2FD024(S,H)17 1.03 1.03 1.06
G1UA030S14 1.03 1.03 1.06
G1HD024 1.01 1.01 1.06
G1FA024S14 1.02 1.02 1.06
G1FA024S17 1.02 1.02 1.06
G1FA030S14 1.03 1.03 1.06

036-21030-003 Rev. B (0203)
Unitary Products Group 11
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree belowthe listed temperature.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. E4FD024S06
INDOOR COIL MODEL NO. F2RP/F2FP024
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM 750 800 850
ID DB 85 80 75 70 85 80 75 70 85 80 75 70
ID WB 72 67 62 57 72 67 62 57 72 67 62 57
75
T.C. 27.0 24.8 22.6 20.4 27.3 25.3 22.7 20.5 27.9 25.2 22.9 20.7
S.C. 17.3 17.3 17.5 17.2 17.5 17.9 17.7 17.6 18.2 18.0 18.1 18.0
K.W 1.94 1.91 1.87 1.81 1.97 1.93 1.88 1.83 2.01 0.43 1.91 1.86
85
T.C. 26.7 24.3 22.0 19.9 26.6 24.5 22.0 19.8 26.8 24.4 22.1 20.2
S.C. 17.4 17.3 17.4 17.3 17.5 17.7 17.5 17.4 17.8 17.8 17.9 18.1
K.W 2.12 2.06 2.00 1.94 2.13 2.08 2.01 1.92 2.16 2.11 2.05 1.99
95
T.C. 24.7 22.5 20.3 18.3 24.9 22.6 20.4 18.4 24.9 22.7 20.5 18.8
S.C. 16.7 16.7 16.7 16.6 17.1 17.0 17.1 17.0 17.4 17.4 17.5 17.8
K.W 2.24 2.18 2.12 2.05 2.26 2.20 2.13 2.06 2.30 2.24 2.17 2.11
105
T.C. 22.5 20.5 18.4 17.0 22.6 20.6 18.6 17.0 22.7 20.7 18.6 17.1
S.C. 16.1 16.0 16.0 16.3 16.5 16.4 16.5 16.5 16.9 16.8 16.7 16.9
K.W 2.38 2.30 2.23 2.16 2.39 2.32 2.24 2.20 2.42 2.36 2.29 2.24
115
T.C. 20.3 18.4 16.9 15.2 20.4 18.4 17.0 15.6 20.4 18.5 17.1 15.8
S.C. 15.5 15.4 15.8 15.4 16.0 15.7 16.2 16.2 16.2 16.2 16.6 16.4
K.W 2.51 2.43 2.36 2.28 2.52 2.45 2.38 2.30 2.57 2.49 2.41 2.34
125
T.C. 18.1 16.3 15.4 13.4 18.2 16.2 15.4 14.2 18.1 16.3 15.6 14.5
S.C. 24.5 20.8 17.8 14.1 24.3 20.4 17.5 14.7 23.9 20.2 17.5 14.7
K.W 2.64 2.56 2.49 2.40 2.65 2.58 2.52 2.40 2.72 2.62 2.53 2.44
NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
N1AHB08 G2FD024(S,H)17 1.02 1.02 1.00
N1AHB08 G2FD030(S,H)17 1.04 1.04 1.00
N1AHB08 G2FD035(S,H)14 1.04 1.04 1.00
N1VSB12 G2FD024(S,H)17 1.04 1.04 0.91
N1VSB12 G2FD030(S,H)17 1.06 1.06 0.95
F2RP/F2FP030 1.03 1.02 1.05
G2FD024(S,H)14 1.02 1.05 1.00
G2FD024(S,H)17 1.02 1.05 1.00
G1HD024 1.02 1.02 1.00
G1UA030S14 1.02 1.02 1.00
G1UA036S17 1.04 1.04 1.00
G1UA036S21 1.04 1.04 1.00
G2FD030(S,H)17 1.04 1.04 1.00
G2FD035(S,H)14 1.04 1.04 1.00
G1FA030S14 1.02 1.02 1.00
G1FA036S17 1.04 1.04 1.00
G1FA036S21 1.04 1.04 1.00

036-21030-003 Rev. B (0203)
12 Unitary Products Group
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree belowthe listed temperature.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. E4FD030S06
INDOOR COIL MODEL NO. F2RP/F2FP030
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM 1000 1050 1100
ID DB 85 80 75 70 85 80 75 70 85 80 75 70
ID WB 72 67 62 57 72 67 62 57 72 67 62 57
75
T.C. 34.3 31.3 28.4 25.6 34.8 31.8 28.8 26.0 35.1 32.1 29.1 26.3
S.C. 21.4 21.3 21.4 21.3 22.2 22.1 22.2 22.1 22.8 22.8 22.9 22.8
K.W 2.37 2.30 2.22 2.15 2.41 2.34 2.27 2.20 2.46 2.38 2.31 2.24
85
T.C. 33.5 30.6 27.7 25.0 34.0 31.1 28.1 25.4 34.3 31.3 28.4 25.6
S.C. 21.3 21.3 21.3 21.3 22.2 22.2 22.2 22.2 23.0 22.9 23.0 23.0
K.W 2.63 2.55 2.46 2.37 2.68 2.60 2.50 2.42 2.72 2.64 2.55 2.46
95
T.C. 31.4 28.6 25.9 23.4 31.8 29.0 26.3 24.1 32.0 29.3 26.5 24.5
S.C. 20.9 20.8 21.0 20.9 21.8 21.8 22.0 22.4 22.7 22.7 22.9 23.2
K.W 2.84 2.75 2.65 2.56 2.89 2.80 2.70 2.62 2.93 2.84 2.74 2.67
105
T.C. 28.9 26.4 23.9 21.9 29.2 26.7 24.5 22.2 29.4 26.9 24.8 22.9
S.C. 20.4 20.3 20.6 20.8 21.4 21.3 22.0 21.7 22.4 22.3 22.9 23.1
K.W 3.05 2.95 2.84 2.75 3.09 3.00 2.90 2.80 3.14 3.04 2.95 2.87
115
T.C. 26.3 24.0 21.9 20.2 26.5 24.2 22.2 20.6 26.6 24.6 22.4 21.0
S.C. 19.8 19.7 20.1 20.3 20.9 20.9 21.0 20.7 21.9 22.1 21.9 21.1
K.W 3.24 3.13 3.03 2.94 3.29 3.18 3.08 3.00 3.33 3.23 3.13 3.06
125
T.C. 23.7 21.6 19.9 18.5 23.8 21.7 19.9 19.0 23.8 22.3 20.0 19.1
S.C. 19.2 19.1 19.6 19.8 20.4 20.5 20.0 19.7 21.4 21.9 20.9 19.1
K.W 3.43 3.31 3.22 3.13 3.49 3.36 3.26 3.20 3.52 3.42 3.31 3.25
NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
N1AHB12 G2FD030(S,H)17 1.00 1.00 1.04
N1AHB12 G2FD035(S,H)14 1.00 1.00 1.04
N1AHB12 G2FD036(S,H)17 1.01 1.01 1.04
N1AHB12 G2FD036(S,H)21 1.01 1.01 1.04
N1VSB12 G2FD036(S,H)17 1.03 1.03 1.04
N1VSB12 G2FD030(S,H)17 1.00 1.00 1.04
F2RP/F2FP036 1.01 1.01 1.04
G2FD030(S,H)17 1.00 1.00 1.00
G2FD035(S,H)14 1.00 1.00 1.04
G1UA036S17 1.00 1.00 1.00
G1UA036S21 1.00 1.00 1.00
G2FD036(S,H)21 1.01 1.01 1.04
G2FD036(S,H)17 1.01 1.01 1.04
G1HD036 1.00 1.00 1.00
G1FA036S17 1.00 1.00 1.00
G1FA036S21 1.00 1.00 1.00

036-21030-003 Rev. B (0203)
Unitary Products Group 13
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree belowthe listed temperature.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. E4FD036S06, E4FD036S25, 46
INDOOR COIL MODEL NO. F2RP/F2FP036
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM 1100 1200 1300
ID DB 85 80 75 70 85 80 75 70 85 80 75 70
ID WB 72 67 62 57 72 67 62 57 72 67 62 57
75
T.C. 40.6 37.3 34.1 31.0 41.0 37.7 34.4 31.4 40.9 37.6 34.7 31.6
S.C. 24.5 24.5 24.8 24.7 25.2 25.2 25.5 25.4 25.4 25.4 26.1 26.1
K.W 3.05 2.98 2.90 2.82 3.09 3.02 2.94 2.86 3.19 3.11 3.04 2.96
85
T.C. 39.8 36.6 33.4 30.4 40.2 37.0 33.7 31.0 40.5 37.2 34.0 31.3
S.C. 25.0 25.1 25.3 25.4 25.8 25.9 26.2 26.6 26.7 26.7 27.1 27.4
K.W 3.34 3.24 3.15 3.05 3.38 3.29 3.19 3.10 3.48 3.39 3.29 3.21
95
T.C. 36.9 33.9 30.9 28.3 37.2 34.2 31.4 28.6 37.4 34.4 31.6 29.0
S.C. 24.6 24.7 25.0 25.1 25.6 25.7 26.1 26.0 26.6 26.6 27.0 27.2
K.W 3.56 3.46 3.35 3.25 3.60 3.50 3.40 3.30 3.70 3.60 3.50 3.40
105
T.C. 33.2 30.6 27.9 25.5 33.4 30.8 28.1 26.0 33.7 31.0 28.4 26.4
S.C. 24.0 24.0 24.2 24.1 25.0 25.1 25.2 25.3 26.1 26.1 26.3 25.7
K.W 3.78 3.68 3.56 3.45 3.83 3.72 3.61 3.51 3.93 3.82 3.71 3.62
115
T.C. 29.2 26.9 24.6 22.8 29.4 27.1 24.8 23.2 29.5 27.3 25.2 23.5
S.C. 22.6 22.7 22.7 22.2 23.7 23.7 23.8 22.5 24.7 24.7 24.5 22.8
K.W 3.99 3.86 3.75 3.64 4.03 3.90 3.79 3.70 4.13 4.00 3.91 3.82
125
T.C. 25.2 23.2 21.3 20.1 25.4 23.4 21.5 20.4 25.3 23.6 22.0 20.6
S.C. 21.2 21.4 21.2 20.3 22.4 22.3 22.4 19.7 23.3 23.3 22.7 19.9
K.W 4.20 4.04 3.94 3.83 4.23 4.08 3.97 3.89 4.33 4.18 4.11 4.02
NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
N1AHB12 G2FD036(S,H)17 1.02 1.02 1.00
N1AHB12 G2FD036(S,H)21 1.02 1.02 1.00
N1AHB12 G2FD042(S,H)17 1.04 1.04 1.00
N1AHB12 G2FD046(S,H)17 1.04 1.04 1.00
N1VSB12 G2FD036(S,H)17 1.04 1.04 0.89
N1VSB16 G2FD036(S,H)21 1.04 1.04 0.89
N1VSB12 G2FD046(S,H)17 1.06 1.06 0.91
N1VSC16 G2FD042(S,H)21 1.06 1.06 0.91
F2RP/F2FP042 1.02 1.02 0.97
G1UA048S17 1.04 1.04 1.00
G1UA048S21 1.04 1.04 1.00
G1HD036 1.02 1.02 1.00
G2FD036(S,H)17 1.02 1.02 0.97
G2FD036(S,H)21 1.02 1.02 1.00
G2FD042(S,H)21 1.04 1.04 1.00
G2FD046(S,H)17 1.04 1.04 1.00
G1HD036 1.02 1.02 0.80
G1FA048S17 1.04 1.04 1.00
G1FA048S21 1.04 1.04 1.00

036-21030-003 Rev. B (0203)
14 Unitary Products Group
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree belowthe listed temperature.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. E4FD042S06
INDOOR COIL MODEL NO. F2RP/F2FP042
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM 1400 1500 1600
ID DB 85 80 75 70 85 80 75 70 85 80 75 70
ID WB 72 67 62 57 72 67 62 57 72 67 62 57
75
T.C. 47.0 42.9 38.8 35.0 47.4 43.2 39.1 35.7 47.6 43.5 39.4 36.0
S.C. 28.8 28.8 29.0 28.9 29.6 29.6 29.8 30.2 30.3 30.3 30.5 30.8
K.W 3.69 3.58 3.46 3.34 3.75 3.63 3.51 3.41 3.82 3.70 3.58 3.48
85
T.C. 46.4 42.3 38.2 34.7 46.7 42.6 38.5 35.0 46.9 42.8 38.7 35.3
S.C. 29.3 29.3 29.5 29.6 30.1 30.1 30.3 30.5 31.0 30.9 31.2 31.3
K.W 3.98 3.84 3.70 3.58 4.04 3.90 3.76 3.64 4.11 3.97 3.83 3.71
95
T.C. 44.1 40.2 36.3 32.9 44.5 40.5 36.7 33.2 44.6 40.6 37.0 33.6
S.C. 28.9 28.9 29.2 29.2 30.0 30.0 30.3 30.1 30.8 30.8 31.2 31.1
K.W 42.00 4.25 4.08 3.93 4.47 4.31 4.14 3.99 4.55 4.39 4.22 4.08
105
T.C. 41.3 37.6 34.0 30.8 41.5 37.8 34.3 31.1 41.6 38.0 34.4 31.8
S.C. 28.3 28.3 28.5 28.4 29.3 29.3 29.6 29.2 30.2 30.2 30.4 30.4
K.W 4.88 4.68 4.49 4.31 4.94 4.74 4.55 4.38 5.02 4.82 4.63 4.48
115
T.C. 38.1 34.7 31.4 28.8 38.3 34.9 31.6 29.2 38.5 35.0 31.8 29.5
S.C. 27.3 27.3 27.4 27.6 28.3 28.3 28.3 28.0 29.4 29.1 29.2 28.3
K.W 5.36 4.13 4.91 4.73 5.42 5.20 4.98 4.83 5.49 5.28 5.07 4.91
125
T.C. 34.9 31.8 28.8 26.8 35.1 32.0 28.9 27.3 35.4 32.0 29.2 27.2
S.C. 26.3 26.3 26.3 26.8 27.3 27.3 27.0 26.8 28.6 28.0 28.0 26.2
K.W 5.84 3.58 5.33 5.15 5.90 5.66 5.41 5.28 5.96 5.74 5.51 5.34
NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
N1AHC16 G2FD042(S,H)21 1.00 1.00 1.03
N1AHC16 G2FD048(S,H)21 1.02 1.02 1.04
N1VSC16 G2FD048(S,H)21 1.04 1.04 0.97
F2FP048 1.02 1.02 1.00
G2FD042(S,H)21 1.00 1.00 1.03
G1UA048S21 1.02 1.02 0.99
G1HD048S 1.01 1.01 1.03
G2FD046(S,H)17 1.01 1.01 1.03
G1HD060S 1.05 1.05 1.04
G2FD048(S,H)21 1.02 1.02 1.04
G2FD048(S,H)24 1.02 1.02 1.04
G1FA048S21 1.02 1.02 0.99

036-21030-003 Rev. B (0203)
Unitary Products Group 15
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree belowthe listed temperature.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. E4FD048S06, E4FD048S25, 46
INDOOR COIL MODEL NO. F2FP048
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM 1450 1650 1750
ID DB 85 80 75 70 85 80 75 70 85 80 75 70
ID WB 72 67 62 57 72 67 62 57 72 67 62 57
75
T.C. 54.3 50.2 46.1 42.3 55.0 50.8 46.6 42.8 55.4 51.2 47.1 43.5
S.C. 33.3 33.6 34.1 34.3 34.7 35.0 35.5 35.6 36.0 36.2 36.8 37.4
K.W 4.15 4.09 4.02 3.96 4.25 4.18 4.11 4.05 4.48 4.41 4.34 4.28
85
T.C. 52.6 48.6 44.6 40.9 53.1 49.1 45.0 41.5 53.5 49.5 45.5 42.0
S.C. 33.2 33.4 33.9 34.1 34.7 34.9 35.3 35.8 36.0 36.2 36.9 37.2
K.W 4.48 4.41 4.33 4.30 4.57 4.50 4.43 4.37 4.81 4.73 4.69 4.59
95
T.C. 49.5 45.7 41.8 38.5 49.8 46.0 42.4 39.0 50.1 46.3 42.7 39.3
S.C. 32.5 32.7 32.9 33.3 33.8 34.0 34.7 34.8 35.4 35.6 36.2 36.2
K.W 4.84 4.77 4.71 4.63 4.95 4.88 4.80 4.73 5.18 5.10 5.02 4.95
105
T.C. 45.8 42.3 38.9 35.7 46.3 42.6 39.3 36.2 46.4 43.0 39.6 37.4
S.C. 31.2 31.4 32.0 32.1 33.1 33.0 33.5 33.7 34.4 34.7 35.0 35.8
K.W 5.29 5.20 5.11 5.04 5.35 5.29 5.21 5.15 5.61 5.51 5.44 5.41
115
T.C. 42.0 38.9 35.8 33.0 42.4 39.3 36.1 34.1 42.4 39.3 36.5 34.6
S.C. 29.8 30.2 30.6 30.8 31.7 31.9 32.2 32.7 32.9 32.8 33.8 33.2
K.W 5.78 5.65 5.58 5.52 5.84 5.75 5.68 5.61 6.13 6.06 5.91 5.84
125
T.C. 38.2 35.5 32.7 30.3 38.5 36.0 32.9 32.0 38.4 35.6 33.4 31.8
S.C. 28.4 29.0 29.2 29.5 30.3 30.8 30.9 31.7 31.4 30.9 32.6 30.6
K.W 6.27 6.10 6.05 6.00 6.33 6.21 6.15 6.07 6.65 6.61 6.38 6.27
NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
N1AHC16 G2FD048(S,H)21 0.99 0.99 0.99
N1AHD20 G2FD048(S,H)24 0.99 0.99 0.99
N1AHD20 G2FD060(S,H)24 1.02 1.02 1.00
N1VSC16 G2FD048(S,H)21 1.00 1.00 0.94
N1VSD20 G2FD060(S,H)24 1.04 1.04 0.93
G1HD048S 0.98 0.98 0.98
G2FD048(S,H)21 0.99 0.99 0.99
G2FD048(S,H)24 0.99 0.99 0.99
G1UA048S21 1.00 1.00 1.00
G1UA060S21 1.02 1.02 1.00
G1UA060S24 1.02 1.02 1.00
G2FD060(S,H)24 1.02 1.02 1.00
G1HD060 1.01 1.01 0.99
G1FA048S21 1.00 1.00 1.00
G1FA060S21 1.02 1.02 1.00
G1FA060S24 1.02 1.02 1.00

036-21030-003 Rev. B (0203)
16 Unitary Products Group
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree belowthe listed temperature.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. E4FD060S06, E4FD060S25,46
INDOOR COIL MODEL NO. F2FP060
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM 1650 1800 1950
ID DB 85 80 75 70 85 80 75 70 85 80 75 70
ID WB 72 67 62 57 72 67 62 57 72 67 62 57
75
T.C. 65.4 60.2 55.2 50.3 66.2 60.9 55.7 50.9 66.8 61.5 56.3 51.7
S.C. 41.5 41.7 42.4 42.5 43.0 43.2 43.9 44.0 44.4 44.5 45.4 45.8
K.W 5.23 5.13 5.04 4.96 5.24 5.15 5.06 4.97 5.27 5.18 5.07 5.02
85
T.C. 64.5 59.3 54.1 49.3 65.2 59.9 54.8 50.1 65.8 60.5 55.3 50.7
S.C. 41.7 41.9 42.5 42.6 43.5 43.7 44.2 44.5 45.1 45.3 45.7 46.1
K.W 5.68 5.57 5.46 5.36 5.68 5.58 5.48 5.39 5.71 5.59 5.49 5.40
95
T.C. 62.0 56.9 51.8 47.3 62.6 57.5 52.4 48.0 63.1 58.0 53.0 48.4
S.C. 41.2 41.4 41.8 42.0 42.9 43.1 43.6 44.0 44.7 44.8 45.5 45.5
K.W 6.09 5.98 5.87 5.76 6.10 5.99 5.88 5.77 6.11 6.01 5.90 5.80
105
T.C. 59.0 54.0 49.1 44.8 59.4 54.6 49.7 45.3 59.6 54.9 50.2 45.9
S.C. 40.4 40.4 40.8 41.0 42.0 42.3 52.5 42.8 43.7 44.0 44.4 44.8
K.W 6.50 6.40 6.28 6.17 6.53 6.41 6.29 6.18 6.57 6.43 6.31 6.20
115
T.C. 55.6 50.2 46.4 42.2 56.0 51.5 46.9 42.7 56.2 51.7 47.3 43.4
S.C. 39.3 38.8 39.7 39.7 40.9 41.1 41.4 41.4 42.7 42.8 43.0 43.3
K.W 6.95 6.72 6.71 6.60 6.97 6.85 6.74 6.61 7.02 6.86 6.76 6.63
125
T.C. 52.3 46.4 43.7 39.6 52.7 48.3 44.1 40.1 52.8 48.6 44.3 40.8
S.C. 38.2 37.2 38.5 38.3 39.9 40.0 30.4 40.1 41.7 41.6 41.6 41.8
K.W 7.40 7.05 7.14 7.03 7.41 7.29 7.18 7.04 7.47 7.29 7.21 7.06
NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
F2FV060 1.03 1.03 1.00
N1VSD20 G2FD060(S,H)24 1.04 1.04 0.94
N1AHD2006 G2FD060(S,H)24 1.03 1.02 0.89
G1FA060S21, 1.00 0.99 1.00
G1HD060 0.99 0.99 0.99
G1UA060S21, 1.02 1.02 1.04
G2FD060(S,H)24 1.03 1.02 0.99

036-21030-003 Rev. B (0203)
Unitary Products Group 17
Multipliers for determining the performance with other indoor sections.
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO E4FD018S06
EVAPORATOR COIL MODEL NO F2RP/F2FP018
AIR TEMP.
ENTERING
OUTDOOR
UNIT
AIR TEMP.
ENTERING
INDOOR
COIL
ID CFM
600 650 700
MBTUH K.W. C.O.P. MBTUH K.W. C.O.P. MBTUH K.W. C.O.P.
60
60 21.11.783.5621.71.783.6621.91.654.00
70 20.01.813.3320.91.833.4321.31.703.76
80 18.91.843.0820.01.883.2020.51.763.50
47
60 18.31.653.2618.51.673.2518.71.573.48
70 17.11.702.9517.61.723.0017.91.613.25
80 15.71.752.6416.61.772.7417.01.653.01
40
60 14.81.323.2516.81.613.0317.51.513.36
70 13.71.502.6615.81.662.7715.71.562.92
80 12.72.001.8414.71.722.5013.91.892.14
30
60 14.01.522.6714.41.532.7214.11.402.91
70 12.81.562.3713.31.582.4313.41.472.63
80 11.5 1.60 2.07 12.1 1.64 2.15 12.6 1.55 2.35
17
60 10.6 1.40 2.23 11.2 1.42 2.32 11.4 1.35 2.49
70 9.4 1.481.8710.01.472.0010.31.432.12
80 8.2 1.58 1.53 8.8 1.53 1.69 9.2 1.52 1.77
10
60 9.0 1.34 2.04 9.5 1.37 2.10 9.9 1.29 2.32
70 7.6 1.37 1.68 8.2 1.41 1.77 8.7 1.34 1.97
80 6.2 1.42 1.33 7.0 1.47 1.45 7.6 1.40 1.65
NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
F2RP/F2FP024 1.01 0.98 1.03
G2FD024(S,H)14,17 1.02 1.00 1.02
G1HD024 1.03 1.01 1.03
G1UA024S17 1.02 1.02 1.00
G1UA030S14 1.03 1.01 1.02
G1FA024S17 1.02 1.02 1.00
G1FA030S14 1.03 1.03 1.00

036-21030-003 Rev. B (0203)
18 Unitary Products Group
Multipliers for determining the performance with other indoor sections.
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO E4FD024S06
EVAPORATOR COIL MODEL NO F2RP/F2FP024
AIR TEMP.
ENTERING
OUTDOOR
UNIT
AIR TEMP.
ENTERING
INDOOR
COIL
ID CFM
750 800 850
MBTUH K.W. C.O.P. MBTUH K.W. C.O.P. MBTUH K.W. C.O.P.
60
60 27.2 2.21 3.72 27.4 2.17 3.80 27.0 1.97 4.12
70 26.1 2.27 3.46 26.7 2.25 3.58 26.5 2.04 3.90
80 25.0 2.48 3.03 25.9 2.47 3.16 26.0 2.26 3.47
47
60 23.2 2.01 3.39 23.2 2.05 3.32 23.7 1.90 3.66
70 22.0 2.07 3.13 22.4 2.12 3.10 23.2 1.98 3.44
80 20.8 2.23 2.74 21.6 2.30 2.76 22.6 2.15 3.08
40
60 18.4 1.63 3.27 21.0 1.99 3.06 21.8 1.87 3.39
70 17.4 1.86 2.73 20.1 2.05 2.84 19.9 1.93 3.00
80 16.5 2.56 1.88 19.2 2.20 2.54 18.1 2.42 2.18
30
60 17.2 1.89 2.63 17.7 1.91 2.68 17.3 1.75 2.86
70 16.1 1.93 2.41 16.8 1.96 2.48 16.9 1.82 2.67
80 15.0 2.02 2.15 15.9 2.06 2.22 16.4 1.95 2.44
17
60 13.0 1.73 2.20 13.5 1.80 2.20 14.0 1.67 2.45
70 12.0 1.75 2.01 12.5 1.83 2.00 13.1 1.70 2.25
80 10.9 1.76 1.82 11.5 1.86 1.81 12.2 1.72 2.07
10
60 10.8 1.72 1.89 11.2 1.75 1.93 11.7 1.64 2.14
70 9.5 1.721.6710.21.761.7410.41.671.88
80 8.2 1.67 1.48 9.1 1.73 1.59 9.1 1.65 1.67
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
F2RP/F2FP030 1.02 0.99 1.03
G2FD035(S,H)14 1.00 1.00 1.00
G2FD030(S,H)17 1.01 1.01 1.00
G2FD024(S,H)14,17 1.00 1.00 1.00
G1HD024 0.98 1.01 0.97
G1UA030S14 0.98 1.04 0.95
G1UA036S17,21 1.00 1.03 0.97
G1FA030S14 0.98 1.04 0.95
G1FA036S17,21 1.00 1.03 0.97

036-21030-003 Rev. B (0203)
Unitary Products Group 19
Multipliers for determining the performance with other indoor sections.
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO E4FD030S06
EVAPORATOR COIL MODEL NO F2RP/F2FP030
AIR TEMP.
ENTERING
OUTDOOR
UNIT
AIR TEMP.
ENTERING
INDOOR
COIL
ID CFM
1000 1050 1100
MBTUH K.W. C.O.P. MBTUH K.W. C.O.P. MBTUH K.W. C.O.P.
60
60 34.52.763.7734.82.753.8234.92.733.86
70 33.02.863.4734.22.873.5934.72.883.64
80 31.72.943.2433.82.973.4334.63.003.49
47
60 29.62.553.4129.92.553.4430.12.553.46
70 28.0 2.64 3.11 29.0 2.66 3.20 29.5 2.68 3.23
80 26.52.722.8628.22.753.0129.02.783.06
40
60 26.82.413.2227.62.463.2727.82.483.26
70 25.32.512.9326.22.552.9926.52.572.99
80 23.92.622.6524.82.642.7325.22.672.74
30
60 23.22.302.9124.12.322.9924.52.353.00
70 21.22.352.6122.22.382.6922.82.422.71
80 19.22.422.2920.32.472.3821.02.522.41
17
60 18.2 2.07 2.58 18.5 2.11 2.57 18.8 2.17 2.54
70 16.52.132.2717.02.172.3017.42.222.30
80 14.72.191.9815.52.232.0416.02.272.07
10
60 15.01.982.2915.82.022.3716.42.082.39
70 13.6 2.01 2.04 14.2 2.06 2.09 14.8 2.11 2.12
80 12.12.051.7912.52.091.8213.22.141.86
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
F2RP/F2FP036 0.98 0.98 1.00
G2FD035(S,H)14 1.01 1.01 1.00
G1FD030S17 1.01 1.01 1.00
G1FD036S17,21 1.01 1.01 1.00
G1HD036 1.02 0.97 1.05
G1UA036S17,21 1.01 1.01 1.00
G1FA036S17,21 1.01 1.01 1.00

036-21030-003 Rev. B (0203)
20 Unitary Products Group
Multipliers for determining the performance with other indoor sections.
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO E4FD036S06, E4FD036S25, 46
EVAPORATOR COIL MODEL NO F2RP/F2FP036
AIR TEMP.
ENTERING
OUTDOOR
UNIT
AIR TEMP.
ENTERING
INDOOR
COIL
ID CFM
1100 1200 1300
MBTUH K.W. C.O.P. MBTUH K.W. C.O.P. MBTUH K.W. C.O.P.
60
60 42.8 3.34 3.85 43.2 3.28 3.97 42.5 3.25 3.94
70 40.3 3.52 3.45 41.4 3.47 3.59 41.4 3.46 3.60
80 38.5 3.68 3.16 40.2 3.65 3.32 40.9 3.66 3.37
47
60 36.6 3.09 3.48 37.0 3.07 3.54 36.1 3.06 3.46
70 34.4 3.23 3.12 35.2 3.23 3.20 35.1 3.23 3.18
80 32.6 3.36 2.85 33.9 3.38 2.95 34.5 3.40 2.98
40
60 32.7 2.97 3.20 33.7 2.98 3.29 34.5 2.99 3.35
70 31.0 3.09 2.92 31.9 3.10 2.99 32.8 3.12 3.06
80 29.3 3.22 2.65 30.2 3.24 2.71 31.2 3.26 2.78
30
60 27.5 2.80 2.84 28.9 2.84 2.94 29.0 2.86 2.92
70 25.8 2.87 2.60 27.2 2.92 2.69 27.5 2.94 2.70
80 23.6 2.97 2.30 25.1 3.03 2.39 25.6 3.06 2.42
17
60 22.0 2.55 2.53 22.5 2.60 2.54 22.6 2.63 2.52
70 20.3 2.62 2.27 21.0 2.68 2.30 21.3 2.71 2.30
80 18.5 2.68 2.03 19.4 2.75 2.08 19.8 2.78 2.10
10
60 18.4 2.44 2.28 19.2 2.50 2.31 19.5 2.54 2.31
70 16.7 2.48 2.03 17.7 2.55 2.09 18.0 2.59 2.10
80 15.0 2.51 1.80 16.1 2.59 1.88 16.5 2.62 1.89
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
F2RP/F2FP042 1.00 1.00 1.00
G2FD036(S,H)17 1.00 1.00 1.00
G2FD036(S,H)21 1.00 1.00 1.00
G2FD042(S,H)21 0.99 0.99 1.00
G2FD046(S,H)17 0.99 0.99 1.00
G1HD036 1.03 1.01 1.02
G1UA048S21 0.99 0.99 1.00
G1FA048S21 0.99 0.99 1.00