
www.yorkshirecareequipment.com
LENTO CARE CHAIR USER MANUAL
4 . E L E C T R I C O P E R A T I O N
Manual Back Angle Recline is the lever
on the left of the handle. Release the
safety catch with one finger and pull
the lever which enables manually
moving the backrest to a more
reclined or upright position.
Manual operation
The tilt-in-space lever is on the right hand side
of the push handle. Release the safety catch
with one finger, pull the lever and tilt the chair.
2. L E G R E S T O P E R A T I O N ( M A N U A L )
3 . B A C K A N G L E R E C L I N E ( M A N U A L )
1. T I L T I N S P A C E ( M A N U A L )
Manual Leg rest operation is a
two handed operation. The
release trigger must be
squeezed as the leg rest is
pulled outwards to extend it.
If your Lento is electric, it will use one of 3 types of
handsets. If just the tilt function is electric, the 2 button
handset (left) will be used. If both the tilt and backrest
recline are electric, the 4 button (middle) handset will be
used. When all actions are electric, the handset on the right
will be used –the buttons on this handset are labelled
accordingly. Note that 2 of the buttons on this handset will
not be operational (i.e. they are surplus to requirements).