INSTRUCTIONS PERTAINING TO A RISK
OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Read Instructions:
The
Owner's Manual
should be read and understood
before operation of your unit. Please, save these
instructions for future reference.
Packaging:
Keep the box and packaging materials, in case the unit
needs to be returned for service.
Warning:
When using electric products, basic precautions should
always be followed, including the following:
Power Sources:
Your unit should be connected to a power source only of the
voltage specified in the owners manual or as marked on the unit.
This unit has a polarized plug. Do not use with an extension cord or
receptacle unless the plug can be fully inserted. Precautions should
be taken so that the grounding scheme on the unit is not defeated.
Hazards:
Do not place this product on an unstable cart, stand, tripod, bracket or
table. The product may fall, causing serious personal injury and serious
damage to the product. Use only with cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product. Follow the
manufacturer's instructions when installing the product and use mounting
accessories recommended by the manufacturer.
The apparatus should not be exposed to dripping or splashing
water; no objects filled with liquids should be placed on the
apparatus.
Terminals marked with the “lightning bolt” are hazardous live;
the external wiring connected to these terminals require installation
by an instructed person or the use of ready made leads or cords.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
Power Cord:
The AC supply cord should be routed so that it is unlikely that it will
be damaged. If the AC supply cord is damaged DO NOT
OPERATE THE UNIT.
Service:
The unit should be serviced only by qualified service personnel.
INSTRUCTIONS RELATIVES AU RISQUE
DE FEU, CHOC ÉLECTRIQUE, OU
BLESSURES AUX PERSONNES.
AVIS:
AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE,
N'ENLEVEZ PAS LE COUVERT (OU LE PANNEAU
ARRIERE). NE CONTIENT AUCUNE PIECE REPARABLE
PAR L'UTILISATEUR.
CONSULTEZ UN TECHNICIEN QUALIFIE
POUR L'ENTRETIENT.
Veuillez lire le manuel:
Il contient des informations qui devraient êtres comprises avant
l'opération de votre appareil. Conservez S.V.P. ces instructions
pour consultations ultérieures
Emballage:
Conservez la boite au cas ou l'appareil devait être
retourner pour réparation.
Warning:
Attention: Lors de l'utilisation de produits électrique,
assurez-vous d'adhérer à des précautions de bases
incluant celle qui suivent:
Alimentation:
L'appareil ne doit être branché qu'à une source d'alimentation
correspondant au voltage spécifié dans le manuel ou tel qu'indiqué
sur l'appareil. Cet appareil est équipé d'une prise d'alimentation
polarisée. Ne pas utiliser cet appareil avec un cordon de
raccordement à moins qu'il soit possible d'insérer complètement les
trois lames. Des précautions doivent êtres prises afin d'eviter que le
système de mise à la terre de l'appareil ne soit désengagé.
Hazard:
Ne pas placer cet appareil sur un chariot, un support, un trépied ou une
table instables. L'appareil pourrait tomber et blesser quelqu'un ou subir des
dommages importants. Utiliser seulement un chariot, un support, un trépied
ou une table recommandés par le fabricant ou vendus avec le produit.
Suivre les instructions du fabricant pour installer l'appareil et utiliser les
accessoires recommandés par le fabricant.
Il convient de ne pas placer sur l'appareil de sources de flammes
nues, telles que des bougies allumées.
L'appeil ne doit pas être exposé à des égouttements d'eau ou des
éclaboussures et qu'aucun objet rempli de liquide tel que des vases
ne doit être placé sur l'appareil.
Les dispositifs marqués d'une symbole “d'éclair” sont des parties
dangereuses au toucher et que les câblages extérieurs connectés à
ces dispositifs de connection extérieure doivent être effectivés par un
opérateur formé ou en utilisant des cordons déjà préparés.
Cordon d'alimentation:
Évitez d'endommager le cordon d'alimentation. N'UTILISEZ PAS
L'APPAREIL si le cordon d'alimentation est endommagé.
Service:
Consultez un technicien qualifié pour l'entretien de votre appareil.
IMPORTANT SAFETY INSTRUCTIONS
SAFE_V4.doc Version 4.0 02/11/99 11:54 AM
# Part# Description Function
1 3450 1/4" JCK PCB MT HORZ, GOLD Jack
2 4417 _10K 5B LIN 9MM HORIZONTAL P28 Gain 1
applicable to serial numbers 001xxxx 3 4420 _50K B LIN 9MM HORIZONTAL P28 Bass
4 4420 _50K B LIN 9MM HORIZONTAL P28 Treble
5 4419 100K B LIN 12MM HORIZONTAL STP27 Freq
6 3660 XLR FEML PCB MT HORZ Jack
7 4418 _10K 5C R/A 9MM HORIZONTAL P28 Gain 2
8 4417 _10K 5B LIN 9MM HORIZONTAL P28 Reverb
knob 8641 Note: All pots use 8641 Aqua Knob Knob
9 3698 SPST ROKR SW QUIK 180" AC PWR BL/BL
10 3421 DPDT PUSH SW PCMT MAKE B4 BREAK
10 8649 BUTTON KNOB FLAT BLACK
11 Z282 AM50 Grill (special order while unit is in production only)
12 3834 HEYCO #1214 STRAIN RELIEF
13 8570 CORNER, 2 LEGS NOTCED LIP BLACK
14 8468 VELCRO STRAP 3/4"X22CM (VELSTRAP)
15 3481 8' 3/18 SJT AC LINE CORD 250 CLIPS
16 8459 9.5" STRAP HANDLE, PLASTIC COVERS
17 8547 PLASTIC FOOT BLACK
18 7417 8R 30W TWEETER PIEZO TLC 1
19 7331 8" 8R 50WPGM SPEAKER JENSENJA8/80
1309 BLOC-40B/40K/40W/50B XFMR
2468 0.800 AMP SLO-BLO .25X1.25 FUSE
3586 ACC# 1BB1C1C SHORT REVERB
3745 DUAL XSISTOR PBL SPRING PLATE ZN
3830 TO218 PREGREASED MICA 56-78-2AP
5105 MPSA13 TO92 NPN DARL T&R TA
5887 2200U 50V 20%CAP BLK 18X27MM EL
6755 LM3876T IC 40 WATT POWER AMP
6798 MC4741CP IC QUAD OP AMP
6827 1N5402 200V 3A0 DIODE
6840 MC33078P IC DUAL OP AMP
6882 TL072CP IC FET DUAL OP AMP
6889 TLO74CN IC QUAD O/A T.I ONLY
8581 CUSTOM PBL TRANSISTOR SPACER
Notes:
Internal Electronic Components
Labeled Components
parts-am50.xls - 10/23/00 ftp.yorkville.com/parts Instrument Amplifiers
am50 Oct 20,2000