
GRN 3MM LED 1V9 6MA HIGHEFF
BAV21 200V 0A25 DIODE T&R
1/8W 249R 2%FLAME PROOF T&R RES
1N4148 75V 0A45 DIODE T&R
1N4004 400V 1A0 DIODE T&R
1N5240BRL 10V0 0W5 ZENER 5% T&R
1N4745A 16V0 1W0 ZENER 5% T&R
1N5246B 16V0 0W5 ZENER 5% T&R
1N5251BRL 22V0 0W5 ZENER 5% T&R
BC550C TO92 NPN TRAN T&R TB
BC560C TO92 PNP TRAN T&R TB
MPSA56 TO92 PNP TRAN T&R TA
2N5638 TO92 NCH JFET T&R TC
MJH11018 TO218 NPN TRAN DARL TI
MJH11017 TO218 PNP TRAN DARL TI
TL072CP IC FET DUAL OP AMP
LM13600N IC XCONDUCTANCE AMP
1/4W 20K0 1%MINI MF T&R RES
_15P 100V 10%CAP T&R BEAD NPO
_33P 50V 10%CAP BLK BEAD NPO
_47P 100V 10%CAP T&R BEAD NPO
100P 100V 10%CAP T&R BEAD NPO
680P 50V 10%CAP T&R BEAD NPO
__1N 50V 10%CAP T&R BEAD NPO
__1N5 50V 10%CAP T&R BEAD Y5P
__4N7 250V 20%CAP BLK 'Y' 10MM AC
_10N 250V 20%CAP BLK RAD POLY FLM
.081" 48X96 UTILITY ALUMINUM
_22N 275V 20%CAP BLK 'X2' 15MM AC
#4 X 5/16 PAN QUAD TYPE A JS500 BLK
_39N 50V 10%CAP T&R BEAD X7R
6-32 X 3/8 PAN PH TAPTITE JS500
_47N 50V 10%CAP T&R BEAD X7R
6-32 X 3/8 FLAT PH TAPTITE BO#4 HEA
_68N 100V 5%CAP T&R RAD .2"FLM
6-32 X 3/4 PAN PH TAPTITE JS500
100N 50V 10%CAP T&R BEAD X7R
6-32 X 1 PAN PH TAPTITE JS500
180N 63V 5%CAP T&R RAD .2"FLM
8-32 X 1/2 PAN PH MS JS500 BLACK
180N 50V 10%CAP T&R BEAD X7R
8 X 3/8 (250 OD,.171 ID)NY SPACER
330N 63V 5%CAP T&R RAD .2"FLM
330N 50V 10%CAP T&R BEAD X7R
#6 INTERNAL TOOTH LOCKWASHER
__1U 63V 20%CAP T&R RAD .2"EL
SPST ROKR SW QUIK 180" AC PWR BL/BL
__1U5 100V 10%CAP BLK RAD POLY FLM
4200 BLOC-80B/100G S120B/100K XFMR
__2U2 63V 20%CAP T&R RAD .2"EL
__4U7 63V 20%CAP T&R RAD .2"EL
_22U 50V 20%CAP T&R RAD .2"EL
_33U 16V 20%CAP T&R RAD .2"NP
_47U 10V 20%CAP BLK RAD NP
_68U 25V 20%CAP T&R RAD .2"EL
100U 25V 20%CAP T&R RAD .2"EL
470U 63V 20%CAP BLK 12X25MM EL
2200U 50V 20%CAP BLK 18X27MM EL
250 MALE PCB TAB BULK CARTRIGE
1/4" JCK PCB MT HORZ GOLD T__
1/4" JCK PCB MT HORZ GOLD __S
RCA DUAL PCB MT VERT GOLD .475"
XLR FEML PCB MT HORZ NO SHELL
EYELET SMALL 0.089 OD PLATED
INTERNATIONAL PC MOUNT FUSEHOLDER
1.6 AMP SLO-BLO .25X1.25 FUSE
5.0 AMP FAST-BLO .25X1.25 FUSE
TRANSISTOR MOUNTING BRACKET
BELLY BUTTON #BB1 CORDS CANADA
SNAP ON 1.5" INSULATING BUSHING
#8 GROUND LUG ZIERICK 505-169
8' 3/18 SJT AC LINE CORD 250 CLIPS
HEYCO #1214 STRAIN RELIEF
1/4-20 CAGE NUT C7998142027
TO218 PREGREASED MICA 56-78-2AP
22AWG SOLID SC WIR T&R JMP
INSTRUCTIONS PERTAINING TO A RISK
OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Read Instructions:
The
Owner’s Manual
should be read and understood
before operation of your unit. Please, save these
instructions for future reference.
Packaging:
Keep the box and packaging materials, in case the unit
needs to be returned for service.
Warning:
When using electric products, basic precautions should
always be followed, including the following:
Power Sources:
Your unit should be connected to a power source only of the
voltage specified in the owners manual or as marked on the unit.
This unit has a polarized plug. Do not use with an extension cord or
receptacle unless the plug can be fully inserted. Precautions should
be taken so that the grounding scheme on the unit is not defeated.
Hazards:
Do not place this product on an unstable cart, stand, tripod, bracket or
table. The product may fall, causing serious personal injury and serious
damage to the product. Use only with cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product. Follow the
manufacturer’s instructions when installing the product and use mounting
accessories recommended by the manufacturer.
The apparatus should not be exposed to dripping or splashing
water; no objects filled with liquids should be placed on the
apparatus.
Terminals marked with the “lightning bolt” are hazardous live;
the external wiring connected to these terminals require installation
by an instructed person or the use of ready made leads or cords.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
Power Cord:
The AC supply cord should be routed so that it is unlikely that it will
be damaged. If the AC supply cord is damaged DO NOT
OPERATE THE UNIT.
Service:
The unit should be serviced only by qualified service personnel.
INSTRUCTIONS RELATIVES AU RISQUE
DE FEU, CHOC ÉLECTRIQUE, OU
BLESSURES AUX PERSONNES.
AVIS:
AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE,
N’ENLEVEZ PAS LE COUVERT (OU LE PANNEAU
ARRIERE). NE CONTIENT AUCUNE PIECE REPARABLE
PAR L’UTILISATEUR.
CONSULTEZ UN TECHNICIEN QUALIFIE
POUR L’ENTRETIENT.
Veuillez lire le manuel:
Il contient des informations qui devraient êtres comprises avant
l’opération de votre appareil. Conservez S.V.P. ces instructions
pour consultations ultérieures
Emballage:
Conservez la boite au cas ou l’appareil devait être
retourner pour réparation.
Warning:
Attention: Lors de l’utilisation de produits électrique,
assurez-vous d’adhérer à des précautions de bases
incluant celle qui suivent:
Alimentation:
L’appareil ne doit être branché qu’à une source d’alimentation
correspondant au voltage spécifié dans le manuel ou tel qu’indiqué
sur l’appareil. Cet appareil est équipé d’une prise d’alimentation
polarisée. Ne pas utiliser cet appareil avec un cordon de
raccordement à moins qu’il soit possible d’insérer complètement les
trois lames. Des précautions doivent êtres prises afin d’eviter que le
système de mise à la terre de l’appareil ne soit désengagé.
Hazard:
Ne pas placer cet appareil sur un chariot, un support, un trépied ou une
table instables. L’appareil pourrait tomber et blesser quelqu’un ou subir des
dommages importants. Utiliser seulement un chariot, un support, un trépied
ou une table recommandés par le fabricant ou vendus avec le produit.
Suivre les instructions du fabricant pour installer l’appareil et utiliser les
accessoires recommandés par le fabricant.
Il convient de ne pas placer sur l’appareil de sources de flammes
nues, telles que des bougies allumées.
L’appeil ne doit pas être exposé à des égouttements d’eau ou des
éclaboussures et qu’aucun objet rempli de liquide tel que des vases
ne doit être placé sur l’appareil.
Les dispositifs marqués d’une symbole “d’éclair” sont des parties
dangereuses au toucher et que les câblages extérieurs connectés à
ces dispositifs de connection extérieure doivent être effectivés par un
opérateur formé ou en utilisant des cordons déjà préparés.
Cordon d’alimentation:
Évitez d’endommager le cordon d’alimentation. N’UTILISEZ PAS
L’APPAREIL si le cordon d’alimentation est endommagé.
Service:
Consultez un technicien qualifié pour l’entretien de votre appareil.
IMPORTANT SAFETY INSTRUCTIONS
SAFE_V4.doc Version 4.0 02/11/99 11:54 AM