Yoto Player 1 // Yoto Ltd., Edspace, Hackney Community College, London, N1 6HQ, UK Yoto Player 1 // Yoto Ltd., Edspace, Hackney Community College, London, N1 6HQ, UK
Yoto Player 1
Regulatory Compliance and Safety Information
Product Name: Yoto Player 1
IMPORTANT
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
Warnings
• This product shall only be connected via the external power supply
provided.
• This product should be operated in a well ventilated environment and
should not be covered.
• This product should be placed on a stable, flat surface in use and
should not be contacted by conductive items.
Instructions for safe use
• To avoid malfunction or damage to your Yoto Player please observe the
following:
• Do not expose it to water or moisture whilst in operation.
• Do not expose it to heat from any source; the Yoto Player is designed for
reliable operation at normal ambient room temperatures.
• Take care whilst handling to avoid mechanical damage to the unit.
• All peripherals used with the Yoto Player should comply with relevant
standards for the country of use and be marked accordingly to ensure that
safety and performance requirements are met.
Compliance Information
• The Yoto Player complies with the relevant provisions of the RoHS Directive
for the European Union.
• WEEE Directive Statement for the European Union
• In common with all Electronic and Electrical products the Yoto Player should
not be disposed of in household waste. Alternative arrangements may apply in
other jurisdictions.
EMC Compliance Statements
European Union (EU) Electromagnetic Compatibility Directive Compliance
Statement:
This product is in conformity with the protection requirements of EU Council
Directive 2004/108/EC on the approximation of the laws of the Member States
relating to electromagnetic compatibility.
This product has been tested and found to comply with the limits for Class B
Information Technology
Equipment according to the European Standard EN 55022.
Warning: This is an EN 55022 Class B product. In a domestic environment this
product may cause radio interference in which case the user may be required to
take adequate measures.
Hereby, Yoto, declares that this Yoto Player is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Federal Communications Commission (FCC) Emissions Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
• This equipment has been tested and found to comply with the limits for
class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with the FCC radiation exposure limits for an uncontrolled
environment.
This equipment shall be installed and operated with a minimum distance of 20cm
between the user and this device.
This transmitter must not be co-located or operated with any other antenna or
transmitter
Industry Canada Class B Emissions Compliance Statement
IC Caution:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference,
(2) this device must accept any interference, including interference that may cause undesired operation
of the device.
This Class [B] digital apparatus complies with Canadian ICE-003.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire
de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
www.yotoplay.com
