YOUTHINK Bluetooth Barcode Scanner User manual
Bluetooth Barcode Setting
1. Product Diagram
•① Scan Button
•② LED Indicator
•③ Charging/Data Port
2. Correct Ways to Scan
3. LED Indicator
LED Indicator
Status
Blue light flashes once
Scanned successfully
Blue light flashes
Setting Mode
Red and blue flash alternatively
Charging
4. Bluetooth barcode scanner characteristics
*. Wireless operation, convenient to carry, flexible workplaces.
*. Wire & wireless, dual mode transition.
*. Superb decoding ability.
*. Comfortable handle, million-level key life.
*. Storage mode support long-distance operation.
*. 750mAh large capacity lithium battery for constant work.
*. Support Windows XP/7/8/10, Android, iOS, Mac.
*. Packing detail: BT Scanner, USB cable, Manual, Quick card.
5. Technical parameters
Working Current
40mA(decoding),20mA(working),5mA(standby)
Charging Source
5V 500mA.
Battery
750mAh
Light Source
Visible light laser diode, wavelength 650±20 nm
CPU
32 bit
BT Ver
3.0
Print Contrast
30% minimum
Error Rate
1/5million
Decode Accuracy
3.3 mil
Read Rate
200 times/sec
Wireless Distance
e 7-10m Indoor
Memory
16MB Flash
Charge Time
1.5 hours
Use Time
30 hours
Prompt Manner
Buzzer & LED Indicator
Scan Angle
±65°(oblique), ±65°(deflecting), ±42°(rotation)
Scan Mode
Wired and Wireless
Scan Type
Single scan/Continuous scan/Automatic scan
Decode Ability
UPC-A,UPC-E,EAN-8,EAN-13,Code128,Code39, Code
39 Full ASCII, Codabar/NW7,Code 93,Code
11,MSI,Interleaved 25,Industrical 25,ISBN,ISSN, China
Post, etc.
Anti-Vibration
Multiple drops from 1.5m height to concrete floor
Interface
USB HID,USB Virtual Serial Port(need driver),SPP
Warranty
One year warranty
6. How to use
(1) Power On/Off
Press the power button (trigger) to turn on the scanner and make the
laser appear.
The scanner will automatically shut off if detecting no operation in 30
seconds. Scan the following barcode to manually shut it off.
Shut Down
(2) Connect/Pair the scanner with PC
The scanner supports both wired and wireless scanning
Wired Mode
Simply connect the scanner to PC via the cable included in the package.
Then power on the scanner. Your PC will install the driver automatically.
Once the driver installation complete, the scanner is ready to use.
Wireless Mode
The Bluetooth scanner, wireless mode need pair with BT host.
7.How to pair the Bluetooth scanner
Bluetooth restore the default settings
Default
How to pair the Bluetooth scanner with other devices:
Notes: Start the scanner, the buzzer sounds di, di, di. The red light begins
flashing, waiting for pairing about 30 seconds. Search the “barcode
scanner” on your device, and connect it.
8.Bluetooth scanner HID/SPP Mode
Bluetooth HID Mode*
1. Pair with mobile phones, pads or other
mobile devices.
2. Pair with your laptops or use the cable to
connect the Bluetooth scanner.
3.Pair with PC without Bluetooth, you need
add a Bluetooth receiver.
Bluetooth SPP Mode
9.Bluetooth scanner auxiliary functions
(1)Reliability settings
Normal reliability: Transmission distance short 7-10 meters
High reliability: Transmission distance short 10-20 meters
(2)Pair settings
Disconnect all BT HOST
For initial setup your scanner has no memory with the paired host
Disconnect the existing connection
After you do this set-up then your scanner disconnect the BT host.
Shut down (turn off the scanner)
Connect the last host
This setting is for your needs, if you want pair with the last host (make
sure the last BT host be opened)
(3)iOS Keyboard show/hide Settings
Notes: Double click the button quickly to show/hide the iOS keyboard,
when you have no manual book.
(4)Battery Status
Scan the barcode directly, show the battery status percent on your PC
Barcode General Setting
1.Working Mode
Normal Mode
Inventory Mode
Wired Mode
Normal Mode：(*)
Scan barcodes directly then the decoded data transfer to the receiver
and displayed on your devices. But if the transmission fails (for example,
over the transmission distance or the receiver is not opened), then "di，
di，di " sound prompts transmission failure.
Normal Mode
Inventory Mode
Inventory mode allows you to use the scanner without setting up any
connection (wired or wireless). Then it has a large working area to cover
or outside the coverage range.
Inventory Mode
Now you can start scanning barcodes. Scanned barcode will be stored in
the built-in memory until it is cleared. At the end of your work, you can
scan the “Transfer data” then transfer data to your PC or other hosts.
Transfer Data
To check how many data decoded, scan the “Total number of data”.
Total Number of Data
After you transfer the data in the Inventory mode, remember to scan the
“Clear data”
Clear Data
Transfer speed setting (Inventory mode only):
Fast
Medium
Slow
Wired Mode：When you use the USB cable, the scanner will change the
wireless mode into wired mode.
Wired mode on (Default)
Wired mode off
2. Sleep time setting up
Sleep time 10 secs
Sleep time 20 secs
Sleep time 5 mins
Sleep time 30 mins
3. Power off time setting
10secs turn off
15mins turn off
Shut down
4. Buzzer setting
Tone 0
Tone 1
Beeper Sound Off
Low Beeper Volume
Medium Beeper Volume
High Beeper Volume
5. Same code delay time
Set up the minimum time delay between decoding of the same code.
Same code delay time 0 sec *
Same code delay time 1sec
Same code delay time 2sec
Same code delay time infinite
6.Reading mode
Continuous scan
Single scan
Automatic off
Automatic on
Note: the sleep time is 15 minutes, when you set automatic on.
7. Other suffix setting
CR
LF
CR+LF
Disable
Prefix-STX
Suffix-ETX
8. Code ID as prefix
Add ID as Prefix on
Add ID as Prefix off
9. USB cable setting (Wired mode)
(1) USB cable Virtual Serial
USB cable Virtual Serial
Note: You need to install driver to enable USB virtual serial.
(2) USB cable HID *
USB cable HID*
USB cable HID Fast (WINDOWS)
USB cable HID Slow (APPLE)*
10. Languages
United States
France
Serbia/Yugoslavia
Germany
Portugal
Spain
Switzerland (German)
Italy
Universal
Code Symbol On/Off
CODE11
Enable* Disable
CODE128
Enable* Disable
CODE 39
Enable* Disable
CODE 39 FULL ASCII
Enable* Disable
CODE 93
Enable* Disable
Interleaved 2 Of 5
Enable* Disable
Industrial 2 Of 5
Enable * Disable
UPC-A
Enable* Disable
UPC-E
Enable* Disable
EAN-13
Enable* Disable
EAN-8
Enable* Disable
MSI/Plessey
Enable Disable*
OTHERS
Expand UPC-E to UPC-A
Enable Disable*
UPC-A to EAN-13
Enable Disable*
EAN-13 to ISBN
Enable Disable*
All barcode add TAB as Suffix
Supplement Digits
UPC/EAN Supplements-2 only
UPC/EAN Supplements-5 only
UPC/EAN Supplements-2&5
CODABAR Send Chars
Enable Disable*
CODE39 Send Chars
Enable Disable*
CODE ID Table:
Code type
ID
Code type
ID
Code type
ID
Code39
a
UPC-A
b
UPC-E
c
EAN8
d
EAN13
e
ISBN
f
Code 128
g
Code93
h
Interleaved2 of 5
i
Industrial 2 of
5
j
CODABAR
k
China post code
y
Code11
M
MSI
I
Warranty
The unit is covered with 12 months warranty from the purchase date
from authorized retailers and distributors. If any defects happen during
the operation, please contact us for further instructions. Thank you again
for choosing us.
Table of contents
