ZABKZ PA2177R User manual

1
OWNER SMANUAL
Before operating, please read thismanualcompletely.
PA2177R
AM/FMTUNER
FEATURES
lDigitaltuner withMPUcontrol.
lTouchkey and VFDdisplay.
l20 memories foreachAM&FM.
lAuto savewithauto stationsearch.
lLevelmeter foraudio output.
lMemory functionafter power dropped.

3
FRONT PANEL
Powerswitch(1 is power on and the power LED”is on )
②PowerLEDindicator ⑦Mono keys
③Up keys ⑧Memo keys
④Auto keys ⑨Displayscreen
⑤Band keys ⑩M1~+10 Location keys
,⑥Down keys
REAR PANEL
FMantenna jack ⑤Remote output
②AMantenna jack ⑥Fuse
③Outputjack ⑦MainsCable
④Remote input
③
⑩ ②
④ ⑤
⑥ ⑦ ⑧ ⑨
②
④
⑥ ⑦ ③
⑤

4
CONNECTION
To controlcenter
Pre Amp. PA2181P
AM Antenna
FM Antenna

5
OPERATION
1Select astation
ATuning in Click BAND keyforband selecting. Click UPorDOWNkeyfortuning step by
step (FM:50kHz/step, AM:9 kHz/step). Ifkeeping UPorDOWNpressed down for1 second, it will
search continuouslyuntil a station tuned in ordon’tin 30 seconds.
BCalling out Click BAND keyforband selecting. Click one keyofM1~+10 forcalling
outa station which stored in M1~M10. Press down M+10 keyfor1 second with CH1_ appears on the
VFDscreen, and then click one ofM1~M9 forcalling outthe station stored in M11~M19. Press down
M+10 keyfor2 secondsforcalling outthe station stored in M20.
2Saveastation
ASave with auto search Click BAND keyforband selecting. Click AUTOkeywith the
symbol AUTO”flashing on the VFDscreen, and then click UPorDOWNkeyforstarting to search
station fromthe lowestfrequencyto the highestfrequencyofthe band orin reverse order. The stations
received will be saved into the memoriesfromM1 to M20 until searching to the end ofthe band orall
memoriesfilled up. The station stored in M1 will be called outwhen AUTOSEARCH comesto the
end.
BSave manually Click MEMOkeywith the symbols MEN”and CH_ _”flashing on the
VFDscreen. Click one keyofM1~M+10 asthe waymentioned in section 1·Bformemoryselection
and then click MEMOkeyonce again to save the station received atpresentinto the memoryselected.
The screen will resume to receiving mode when done.
3Mono/Stereoswitching
Click MONO keyin circle forswitching between Stereo Mode and Mono Mode ofthe receiver.
Stereo Mode isforFMonly. The stereo function will be activated automaticallywith the symbol
STEREO”flashing in Stereo Mode while the FMstereo signalisstrong enough. Butthe S/Nof
Mono Mode isbetterthan thatofStereo Mode.
4Remote with compute link
Thissetcan be controlled bya programmanagerofZABKZ-PAseries(orDSPPA-MPseriesand
DSPPA-MAG series) via a link cord. Forthispurpose，fit a link cord fromthe Remote Link port ofthis
settothe link port ofthe programmanager.We can usethe managertomake programsortimingsfor
thisset.

6
SPECIFICATIONS
FM 87.0 ~ 108.0 MHz
Band AM 522 ~ 1611 kHz
FM 16dBμ
InputSensitivity AM 49dBμ
FM Mono 75dB，Stereo 70 dB
S/N
AM 40dB
FM 50kHz
Freq. Step AM 9kHz
FM 10.7 MHz
MF AM 450 kHz
Outputlevel 0dB
Protection AC fuse ×1
Power Requirement AC 220 –240 V/50～60 Hz
Dimensions 485×88×378 mm
Gross weight 6.5 kg
Net weight 5.2 kg
Specificationsaresubjecttobechangedwithoutnotice.
CAUTION
Do notputthe vase full ofwaterand similarthingson the machine.
Please pull outthe plug fromthe outletwhen the machine isOFF state.
To reduce the risk ofelectric shock, do notremove the unit scover.
No userparts are inside. Forservices, referto a qualified service person.
HTTP://WWW.ZABKZ.COM/ DSPPA ACOUSTICTECHNOLOGYCO.LTD.