ZALMAN ZM-NS1000F User manual

User’s Manual
ZM-NS1000F
Ver. 1.0
www.ZALMAN.com
To ensure safe and easy installation,
please read the following precautions.

11
1. Precautions
2. Product Specications
3. Components
1) Check the components list and condition of the product before installation.
If any problem is found, contact the retailer to obtain a replacement.
2) Zalman Tech Co., Ltd. is not responsible for any damages due to improper
product use.
3) Excessive force exerted on the product may cause critical damage to the
product.
4) To prevent damages, do not allow objects to obstruct fan rotation.
5) To prevent short circuiting and/or damage of the fans, do not spill liquids on
the unit.
6) Do not obstruct the air inlets.
7) Use on a at and vibration-free surface.
8) Do not use in humid or dusty environments, under direct sunlight, or other
heat sources.
9) For long-term storage have the vents covered to prevent entry of foreign
objects.
10) Product designs and specications may be revised without prior notication
to improve quality and performance.
Material Pure Aluminum, ABS, Rubber, Silicone
Weight 689g
Dimensions 300(W) × 284(L) × 54(H)㎜
Input Voltage 5V(USB powered)
Fan
Type DC Brushless Fan
Quantity 1 unit
Bearing Sleeve
RPM 1,200 ~ 1,600RPM ±10%
Noise Level 19 ~ 25dBA ± 10%
One (1) NS1000F One (1) USB Cable
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due
to external causes, including but not limited to, improper use,
problems with electrical power, accident, neglect, alteration,
repair, improper installation, or improper testing.

22
4. Features
USB port
Power Indication LED
ON/OFF Switch / Fan RPM Control
(High/Low/Off)
1) Port and On/Off Switch
2) Stand Angle Adjustment
The NS1000F can be adjusted in 6 steps between 22° ~ 43°.

33
5. Recommended Use
1) To power the unit, connect the NS1000F and Notebook Computer using the
included USB Power Cable.
2) Adjust the RPM Control to the preferred noise and performance setting after
turning the Notebook Cooler’s ON/OFF Switch ON .
※2 Fan RPM settings: High/Low