Zanussi BMF 849 User manual

ELECTRIC OVENS
BMF 849
BMS 841
INSTRUCTION BOOKLET
IL

2
English
These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
Important Safety Information
Installation
 It is mandatory that all operations required for the
installation are carried out by a qualified or competent
person, in accordance with existing rules and
regulations.
 It is dangerous to alter the specification in any way.
 Once you removed all pac aging from the appliance,
ensure that it is not damaged and the electric cable is
in perfect conditions. Otherwise, contact your dealer
before proceeding with the installation.
Child Safety
 This appliance has been designed to be operated by
adults and children under supervision. Young children
MUST NOT be allowed to tamper with the controls or play
near or with the oven.
 Accessible parts of this appliance may become hot
when it is in use. Children should be KEPT AWAY until it
has cooled.
During use
 This appliance has been designed for coo ing edible
foodstuff only and MUST NOT be used for any other
purposes.
 Ensure that all control nobs are in the OFF position
when not in use.
 Should you connect any electrical tool to a plug near
this coo ing appliance, ensure that electric cables are
not in contact with it and eep them far enough from
the heated parts of this appliance.
If the appliance is out of order, disconnect it from the
electric supply.
Do not leave untensils containing foodstuffs, e. g. fat
or oil in or on the appliance. This could cause damage
in case the appliance is inadvertently switched on.
 Always place the dripping pan in position to collect fat
when using the grill or when coo ing meat. Pour a little
water into the dripping pan to avoid smo e and
unpleasant smells.
 Always use oven gloves to remove pans from the oven.
 For hygiene and safety reasons, this appliance should
be ept clean at all times. A build-up of fats or other
foodstuff could result in a fire.
 Disconnect the appliance from the electrical supply,
before carrying out any cleaning or manteinance wor .
Some parts of the appliance are covered by a shoc -
proof plastic film. Remove this film before using the
oven.
This appliance is meant to operate with a single-
phased connection to 230V electrical supply. An
eventual 400V poliphasic connection without earth
wire will destroy the oven and the hob, if fitted.
 The manufacturer disclaims any responsability
should all the safety measures not be carried out.
Service
 Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local Service Centre.
Always insist on genuine spare parts.
Environmental Information
 After installation, please dispose of the pac aging with
due regard to safety and the environment.
 When disposing of an old appliance, ma e it unusable,
by cutting off the cable.
MANUFACTURER ELECTROLUX ZANUSSI S.p.A.
Viale Bologna, 298
47100 FORLÌ (Italy)
It is most important that this instruction book
is be retained with the appliance for future
reference. Should the appliance be sold or
transferred, always ensure that the book is left
with the appliance in order that the new
owner can get to know the functions of the
appliance and the relevant warnings.

3
The following symbols will be found in the text to guide you
throughout the Instructions:
Safety Instructions
Step by step instructions for an operation
Hints and Tips
Environmental information
F
Contents
For the User For the Installer
Description of the Oven
Push-Pull control knobs ( MF
849)
Some models are provided with push-pull control nobs
(Fig. 1). These nobs can be completely sun en inside
the control panel when the oven is not wor ing.
The Safety Thermostat
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Zanussi
Service Centre. Under no circumstances should you
attempt to repair the appliance yourself.
The Cooling Fan for the Controls
This oven is provided with a cooling fan, meant to eep the
front panel, the nobs and the oven door handle cool. This
fan may run on after the oven or grill is switched off, until
a normal temperature is reached.
Fig. 1 FO0350
Guide to Use the instructions
Important Safety Information 2
Guide to Use the instructions 3
Description of the Oven 3
When the oven is first installed 5
Using the Oven 5
Electronic programmer
Using the oven 8
Cooking Tables 9
Cleaning and maintenance 11
Technical Assistance 13
Something not working... 13
Technical Data 14
Installation 14
Electrical connection 15

4
Oven function control knob (Fig. 2)
The oven function control nob can have the following
symbols and functions:
Oven Light - The oven light will be on
without any coo ing function
Conventional coo ing - The heat comes
from both the top and bottom element,
ensuring even heating inside the oven.
Top heating element - The heat comes
from the top of the oven only.
Bottom heating element - The heat comes
from the bottom of the oven only.
or Inner grill element only - can be used for
grilling small quantities.
or Double Grill - The full grill element will be
on.
or Thermal Grilling - This function offers an al-
ternative method of coo ing food items,
normally associated with conventional
grilling. The grill element and the oven
fan operate together, circulating hot air
around the food. When using this
function, select a maximum tempera-
ture of 200°C and do not exceed 1 hour
of operation.
- Fan coo ing - This allows you to roast or
roast and ba e simoultaneously using any
shelf, without flavour transference.
Defrost Setting - This setting is intended to
assist in thawing of frozen food.
Thermostat control knob (Fig. 3)
Turn the thermostat control nob to select temperatures
between 50°C and 250°C (MAX).
Thermostat control light (°C)
Once the oven temperature has been selected, the
temperature light will come on and remain on until the
oven has reached the correct setting; after that, it will go
on and off with the thermostat, showing how the tempe-
rature is being maintained.
Oven control light
It will come on every time an heating element is set on
operation.
100
150
200
50
max
FO 2630
100
150
200
MAX
50
FO0769
Fig. 3
Model BMF 849
Model BMS 841
FO0347
0
FO 2589
Fig. 2
Model BMF 849
Model BMS 841

5
Before coo ing for the first time, carefully wash the
oven accessories.
The oven will work only if the time of day has
been set with the electronic programmer.
Once the oven has been installed:
a) set the thermostat nob to MAX (250);
b) switch the oven function control nob to conventional
coo ing ( );
c) allow the oven to run empty for approximately 45 minutes;
d) open a window for ventilation.
During this time, an unpleasant odour may be emitted. This
is absolutely normal, and is caused by residues of
manufacturing.
Repeat this operation for the grill and fan coo ing function.
Once this operation is carried out, let the oven cool down,
then clean the oven cavity with a soft cloth soa ed in warm
soapy water.
FO 2161
Fig. 4
To open the oven door, always catch the
handle in its central part (Fig. 4).
When the oven is first installed
Condensation and steam
When food is heated it produces steam in the same way
as a boiling ettle. The oven vents allow some of this
steam to escape. However, always stand back from
the oven when opening the oven door to allow any
build up of steam or heat to release.
If the steam comes into contact with a cool surface on the
outside of the oven, e.g. a trim, it will condense and
produce water droplets. This is quite normal and is not a
fault with the oven. To prevent discoloration, regularly
wipe away condensation and also soilage from surfaces.
Telescopic shelf supports (fig. 6)
- Mod. BMF 849 Shelf level 2 is fitted with telescopic
shelf supports.
- Mod. BMS 841 Shelf levels 2 and 4 are fitted with
telescopic shelf supports.
1. Pull the right and left hand telescopic shelf supports
completely out, as shown in the diagram.
2. Place the shelf or the grill pan on the telescopic shelf
supports, as shown in the diagram, then gently push
them all inside the oven.
Do not attempt to close the oven door if the
telescopic shelf supports are not completely
inside the oven. This could damage the door
enamel and glass.
Using the Oven
4
3
2
1
FO 0019
Fig. 5
Fig. 6
Model BMS 841
F
Always cook with the oven door closed.
 Stand clear when opening the drop down oven door. Do not
allow it to fall open - support the door using the door handle,
until it is fully open.
 The oven has four shelf levels. The shelf positions are counted
from the bottom of the oven as shown in the diagram.
 Do not place coo ware directly on the oven base.
Model BMF 849