Zanussi ZF 26/6 D User manual

FRIDGE-FREEZER
REFRIGERATEUR-
CONGELATEUR
FRIGORÍFICO-
CONGELADOR
ZF 26/6 D
INSTRUCTION BOOKLET MODE D’EMPLOI LIBRO DE INSTRUCCIONES
2222 137-53
This document was created with FrameMaker 4.0.4

2
CONTENTS
Warnings ................................page 3
Installation ...............................page 4
Caution................................page 4
Location................................page 4
Rearspacers...............................page 4
Powerconnection.............................page 4
Cleaning the interior . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 4
Door reversibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 5
Operation ................................page 6
Starting-up and Temperature Regulation. . . . . . . . . . . . . . . . . . . . .page 6
Storage of foods in refrigerator compartment . . . . . . . . . . . . . . . . . . .page 6
Movableshelves.............................page 6
Positioning the door shelves . . . . . . . . . . . . . . . . . . . . . . . . .page 6
Freezing fresh food . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 7
Storage of frozen food . . . . . . . . . . . . . . . . . . . . . . . . . . .page 7
Thawing................................page 7
Defrosting...............................page 7
Ice-cube production . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 8
Maintenance ...............................page 9
Internalcleaning.............................page 9
Externalcleaning.............................page 9
Periods of non-operation. . . . . . . . . . . . . . . . . . . . . . . . . . .page 9
Interior light bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 9
Customer service .............................page 9

3
WARNINGS
It is most important that this instruction book should
be retained with the appliance for future reference.
Should the appliance be sold or transferred to another
owner, or should you move house and leave the
appliance, always ensure that the book is supplied
with the appliance in order that the new owner can be
acquainted with the functioning of the appliance and
the relevant warnings.
These warnings are provided in the interest of safety.
You must read them carefully before installing or
using the appliance.
ªThis appliance is designed to be operated by
adults. Children should not be allowed to tamper
with the controls or play with the product.
ªAny electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
ªThis product should be serviced by an authorized
Service Centre, and only genuine spare parts
should be used.
ªIt is dangerous to alter the specifications or
modify this product in any way.
ªCare must be taken to ensure that the appliance
does not stand on the electrical supply cable.
ªThe domestic refrigerators and freezers are
designed to be used specifically for the storage of
edible foodstuffs only.
ªFrozen food must not be re-frozen once it has
been thawed out.
ªManufacturers’ storage recommendations should
be strictly adhered to. Refer to relevant
instructions.
ªThere are working parts in this product which
heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.
ªParts which heat up should not be exposed.
Whereverpossible the backof the productshould
be against a wall.
ªBefore any cleaning or maintenance work is
carried out, be sure to switch off and unplug the
appliance.
ªIf the appliance has been transported
horizontally, it is possible that the oil contained in
the compressor flows in the refrigerant circuit. It
is advisable to wait at least two hours before
connecting the appliance to allow the oil to flow
back in the compressor.
ªThe inner lining of the appliance consists of
channels through which the refrigerant passes. If
these should be punctured this would damage the
appliance beyond repair and cause food loss.
DO NOT USE SHARP INSTRUMENTS to
scrape off frost or ice. Frost may be removed by
using the scraper provided. Under no
circumstances should solid ice be forced off the
liner. Solid ice should be allowed to thaw when
defrosting the appliance. See defrost instructions.
ªDo not place carbonated or fizzy drinks in the
freezer as it creates pressure on the container,
which may cause it to explode, resulting in
damage to the appliance.
ªThis appliance is heavy. Care should be taken
when moving it.
ªIce lollies can cause frost burns if consumed
straight from the appliance.
ªUnder no circumstances should you attempt to
repair the appliance yourself.
Repairs carried out by inexperienced persons
may cause injury or more serious malfunctioning.
Refer to your local Service Centre, and always
insist on genuine spare parts.
ªThis appliance does not contain gasses which could
damage the ozone layer, in either its refrigerant
circuit or insulation materials; it must nevertheless
be disposed of in a proper manner, in accordance
with regulations for protection of the environment.
2222 137-53
12/95

4
INSTALLATION
Caution
If this appliance featuring magnetic door seals is to
replace an older appliance having a spring lock
(latch) on the door or lid, be sure to make that
spring lock unusable before you discard the old
appliance. This will prevent it from becoming a
death-trap for a child.
Location
Placethe appliance away from allheat sources, such
as: radiators, heating stoves, direct sunlight, etc.
Best results are obtained with a room temperature
ranging between +18
°C and +43°C.
Make sure that there is nothing at the back, at the
top and at the bottom of the appliance to obstruct
air circulation.
For a more efficient operation of the appliance, the
minimum distance between the top of the appliance
and other overhanging kitchen furniture, if any,
should be at least 100 mm (see Fig. 1 - A).
However, the best solution would be that shown in
Fig. 1 - B with no overhanging furniture.
Two adjustable feet make it possible to accurately
level the appliance.
Fig. 1
Rear spacers (Fig. 2)
In the plastic envelope containing the Operating
Instructionsarealsoincluded two wall spacers to be
fitted into the special openings provided on the back
of the appliance.
Push-fit the spacers into the openings, making sure
that arrow (A) is positioned as per Fig. 2 and then
turn the spacers through 45°until they lock in
(arrow (A) in a vertical position).
100 mm min.
AB
D042
Fig. 2
Power connection
Before plugging in the appliance to the mains
socket, check that the voltage and frequency
indicated on the appliance’s rating plate are the
same as those provided by your home power supply.
A 6% fluctuation above or below rated voltage is
acceptable.
For operation at different voltages, a suitable
transformer should be used.
The appliance MUST be connected to an efficient
earth or ground tap.
The supply-lead plug in fact incorporates a special
earth or ground contact for this purpose. If by any
chance the sockets of your domestic wiring system
are not earthed, the appliance must be connected to
a separate earth or ground wire by a qualified
electrician, in accordance with existing safety
regulations.
The manufacturer declines to accept any liability if
this accident-prevention procedure is not followed.
This appliance complies with EEC directive
number 87/308 of 2/6/87 relative to radio
interference suppression.
This appliance complies with the following
E.E.C. Directives:
-73/23 EEC of 19.2.73 (Low Voltage Directive) and
subsequent modifications;
-89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
Cleaning the interior
Before using the appliance for the first time, wash
the interior and all internal accessories with
lukewarm water and some neutral soap so as to
remove the typical smell of a brand-new product,
then dry thoroughly. Do not use detergents which
will leave an odour or abrasive powders on the
interior, as these will damage the finish.
D039
A
45°

5
Door reversibility
(Fig. 3)
Unplug the refrigerator from the wall socket before
performing the following operations:
Remove socle (2) by unscrewing its front screws.
Slide it downwards to release it from the central
runners.
Remove bottom hinge (1).
Unscrewpin (C) from hole (A)and screw itinto hole
(B).
Remove door stop hinge (D) and refit it on the
opposite side.
Slide out the lower door from middle hinge.
Remove middle hinge (4) and upper hinge (3) and
refit them on the opposite side.
Refit lower door and bottom hinge (1) on the
opposite side.
Turn the base upside-down and refit it.
Removehandles (5-6) andrefit them on theopposite
side.
The holes that are not used are to be masked with
the plastic plugs removed.
Attention
Aftercompletionofthedoorreversibilityoperation,
verify that the door gasket is adherent to the
cabinet. If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of
the gasket or accelerate this process by heating up
the part involved with a normal hairdrier.
Fig. 3
D158
5
6
3
4
D
C
A
1
B
2

6
OPERATION
Starting-up and Temperature Regulation
Insert the plug into the wall socket. Open the
refrigerator door and turn the thermostat knob, to
be found on the upper right side of the inner liner,
clockwise, beyond the «
O» position, to start the
appliance.
Temperature adjustment is obtained by turning the
thermostat knob to the required setting. A medium
setting is generally the most suitable. However, the
thermostat knob setting should be adjusted
depending on the temperature required inside the
appliance. This, in turn, depends on a number of
factors such as the ambient temperature, the
number of times the door is opened, the quantity of
food stored and the location of the appliance. Turn
the knob clockwise, to higher numbers, to obtain a
lower temperature, or anticlockwise if a higher
temperature is required.
Storage of foods in refrigerator compartment
To achieve the best results with the refrigerator
compartment, you should follow some very simple
rules:
Do not put warm foods or evaporating liquids in the
refrigerator;
cover or wrap foods (particularly if they have a
strong smell or contain aromatic herbs);
do not cover the shelves with paper or plastic since
this blocks the air circulation in the compartment.
Please note: Do not place foodstuffs and paperbags
etc. in contact with the evaporator plate at the rear
of the refrigerator compartment as this can lead to
impairment of the operation of the refrigerator.
In addition, food should be positioned inside the
refrigerator compartment as indicated in the
figure 4 that is given below:
1. Cold cuts, cheese, butter, milk
2. Meat and fish
3. Fruit and vegetables.
In this position, fresh meat can be stored for 1-2 days
at most.
Fig. 4
D247
1
2
3
Further hints for getting the best out of your
refrigerator are the following:
Cooked food, cold dishes, jellies etc., should be well
covered.
Fruitandvegetablesshouldbewashedbeforebeing
stored.
Raw meat (all types, including poultry) should be
stored in plastic bags.
Movable shelves Fig. 5
The walls of the
refrigerator are
equipped with a
series of runners
so that the
shelves can be
positioned as
desired.
Positioning the door shelves (Fig. 6-7)
To permit storage of food packages of various sizes,
the door shelves can be adjusted in height.
To make these adjustments proceed as follows:
Gradually pull the shelf in the direction of the
arrows until it comes free, then reposition as
required (Fig. 6). Fig. 6
For more thorough cleaning, the top door shelf can
be removed by pulling it in the direction of the
arrows, then refitting it in position (Fig. 7).
Fig. 7
D040
D064
D066

7
Freezing fresh food
The 4-star compartment ( ) is suitable for
long term storage of commercially frozen food (i.e.
for 3 months, unless otherwise stated by the
manufacturer), and for freezing fresh food.
Under normal circumstances, to freeze fresh foods
it is not necessary to change the setting of the
thermostatknobwithrespecttothenormalrunning
position.
However, for a quicker freezing operation, turn the
thermostat knob to the coldest setting, but
remember that, in this condition, the refrigerating
compartmenttemperature might drop below0
° C. If
this occurs reset thermostat knob to a warmer
setting.
To help you make the most of the freezing process,
here are some important hints:
Place the food to be frozen on the shelf.
The maximum quantity of food which can be frozen
in 24 hours is shown on the rating plate.
Only freeze top quality, fresh and thoroughly
cleaned foodstuffs.
Prepare the fresh food in small portions to enable it
to be rapidly and completely frozen and to make it
possible subsequently to thaw only the quantity
required at the time.
Wrap up the food in aluminium foil or polythene and
make sure that the packages are airtight.
It is advisable to show on the single food packet the
freezing-in date to enable you to keep tab of the
storage time.
Do not allow fresh, unfrozen food to touch food
which is already frozen, thus avoiding a rise in
temperature of the latter.
Important
Do not put carbonated liquids (fizzy drinks, etc.) in
the freezing compartment as they may burst.
Water ices, if consumed immediately after removal
from the freezing compartment, can possibly cause
the skin to be freeze burnt.
Remember that, once thawed, frozen food
deteriorates rapidly.
On the rear side of the door you will find a list of
foodsfollowedbyanumber. Thesenumbersindicate
the maximum period of time for which the food in
question may be conserved (in months).
Storage of frozen food
To obtain the best performance from this appliance,
we strongly recommend that you make sure that
the commercially frozen foodstuffs were adequately
stored by the retailer and, furthermore, be sure
that these frozen foodstuffs are transferred from
the foodstore to the freezer in the shortest possible
time (a temperature increase of the frozen food
could shorten its storage period).
It is also advisable not to exceed the storage period
indicated by the producer of the food.
Finally, do not open the door frequently or leave it
open longer than absolutely necessary.
If there is a power failure when food is in the
freezer, do not open the door of the freezing
compartment.
The frozen food will not be affected if the power cut
is of short duration (a temperature increase of the
frozen food could shorten its safe storage period),
otherwiseitisrecommendedthat the food should be
used within a very short time.
Thawing
Deep-frozen or frozen food, prior to being used, can
be thawed in the refrigerator compartment or at
room temperature, depending on the time available
for this operation.
Small pieces may even be cooked still frozen,
directly from the freezer: in this case, cooking will
take longer.
Defrosting
Frost is automatically eliminated from the
evaporator of the refrigerator compartment every
time the motor compressor stops, during normal
use. The defrost water drains out through a trough
into a special container on the back of the appliance
where it evaporates.
Periodically clean the defrosting water drainage hole
of the refrigerator, using the special cleaner already
inserted into the discharge hole (Fig. 8).
Fig. 8
D037

8
The freezer compartment, however, will become
progressively covered with frost. This should be
removed with the special plastic scraper provided,
whenever the thickness of the frost exceeds 4 mm.
During this operation it is not necessary to switch
off the power supply or to remove the foodstuffs.
However, when the ice becomes very thick on the
inner liner, complete defrosting should be carried
out and it is advisable to carry out this operation
when the appliance is empty.
To carry out complete defrosting of the freezer
compartment ( ) proceed as follows:
Unplug the appliance from the power supply or set
the thermostat on the «
O » position. Remove the
ice-cube trays and the frozen foods and wrap them
in several sheets of newspaper or, even better, in
thermally insulated containers, and then keep them
in a cool place.
Keep the freezer door open and introduce a
container filled with hot water (taking care to place
this on a layer of cardboard) so as to accelerate the
defrosting process.
Place a basin on the first grill shelf in the
refrigerator directly below the drainage hole and
lift up the small lid (Fig. 9).
Fig. 9
Absorb all remaining water with a sponge and then
accurately dry the freezer. Reconnect the appliance
to the power supply and then set the thermostat to
the coldest position for approximately 2 hours and
then shift it into the normal functioning status.
Replace the foods previously removed from the
freezer and the ice cubes trays.
Important
Never use knives or metal objects to scrape away
the accumulated frost which might damage the
cooling circuit.
Remember that an increase in the surface
temperature of already-frozen foods may
significantly decrease the duration of their
conservation.
D016
Ice-cube production
This appliance is equipped with trays for the
production of ice-cubes.
Fill these trays with water to 3/4 of their height,
then put them in the freezer compartment.
The ice-cubes may be shaken out from the trays by
simply twisting; do not use metallic instruments to
remove the trays from the freezer.

9
MAINTENANCE
Before all operations, disconnect the appliance from
the mains.
Internal cleaning
Clean the inside and accessories of the refrigerating
compartment with warm water and sodium
bicarbonate (one tablespoon in 4 litres of water).
Rinse and dry thoroughly.
Clean the inside of the freezer compartment after
each complete defrosting.
External cleaning
Wash the outer cabinet with warm soapy water.
Do not use abrasive products.
Once or twice a year dust the condenser (black grill)
and compressor at the back of the appliance with a
brush or vacuum cleaner. An accumulation of dust
will affect the performance of the appliance and
cause excessive electricity consumption.
Periods of non-operation
When the appliance is not in use for long periods,
disconnectfrom the mains, emptyandclean, leaving
the door ajar to prevent unpleasant smells.
Interior light bulb (Fig. 10)
The light inside the refrigerator compartment is
easy to get at through the opening in the light
holder.
If the light does not go on when the door is open,
check that it is screwed into place properly.
If it still does not light up, change the bulb.
The rating is shown on the light bulb cover.
Fig. 10
D025
CUSTOMER SERVICE
What to do if the appliance is not functioning
properly.
If something is not working properly, check that:
the plug is firmly in the wall socket and the mains
power switch is on;
thereisan electricity supply (find outbypluggingin
another appliance);
the thermostat knob is in the correct position.
If the appliance seems too noisy, check that the
sidesarenottouching furniture that can transmit or
amplify a noise or a vibration. Also, check that the
piping of the refrigerant system does not vibrate.
If there are water drops on the bottom of the
cabinet, check that the defrost water drain opening
is not obstructed.
If your appliance is still not working properly after
making the above checks, contact the nearest
service centre.
To obtain fast service, it is essential that when you
apply for it you specify the model & serial number
of your appliance which can be found on the rating
plate.