Zappiti Player Mini PlayerMini User manual

English ● Français
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.and
worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered
trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc.
All Rights Reserved
Quick Start Guide
Guide de démarrage rapide

2
Dune HD TV-303D Quick Start Guide

3
English
3
Table of Contents
Table of Contents Table des matières
English
Quick Start Guide
• Introduction
• Key Features
• Extra Functions
• Package Contents
• Exterior
• Remote Control
• Getting Started
• Quick Setting of Video Output Mode
• Connecting USB Drives
• Using Internal HDD
• Using SD Memory Cards
• Using USB 3.0 Slave Function
• Accessing Network Drives
• Formatting HDD
• Switching the Player On and Off
• NAS (Network Attached Storage)
• Wi-Fi
• Limitations
• Updating Your Player and Getting More Information
Français
Guide de démarrage rapide
• Introduction
• Fonctions clés
• Autre fonctionnalités
• Contenu de la boîte
• Extérieur
• Télécommande
• Démarrage
• Configuration rapide de la sortie vidéo
• Connexion USB
• Utilisation d’un disque dur interne
• Utilisation de cartes mémoires SD
• Utilisation du port USB Slave 3.0
• Accéder aux dossiers réseau
• Formater un disque dur
• Allumage et extinction
• NAS (Network Attached Storage)
• Wi-Fi
• Restrictions
• Mise à jour et utilisation de Zappiti Media Center
4 16

4
Zappiti Player Mini Quick Start Guide
Introduction
Zappiti Player Mini is an all-in-one solution for up to Full HD (1080p) and 3D video playback.
Key Features
● The newest Sigma Designs 8672/8673 media processor: enjoy excellent playback and performance of interactive
features.
●HDD player: connect an HDD to the player and play content directly from the HDD.
●Network player: connect the player to a local network and play content directly from PC or NAS (UPnP, SMB, NFS).
● MKV player: play HD and SD video in a popular MKV format and other modern video file formats, including top
quality HD video with very high bitrate.
●3D Video support: supports all modern 3D video standards such as MVC, SBS and Top/Bottom
●2 USB ports: conveniently connect HDDs, USB flash drives, USB card readers and other USB storage devices.
● HDD rack with hot swap function: easily and quickly insert and exchange internal 2.5’’ SATA HDD.
● USB 3.0 Slave port: easily and quickly transfer files between the HDD in the player and a PC.
● SD card slot: easily play media files on SD memory cards from your camera or other devices, or use an SD memory
card as a local or system storage.
● HDMI 1.4: ensure the best possible quality of HD video and HD audio.
● Internal Wi-Fi module: equiped with internal Wi-Fi module and antenna.
● Video output flexibility: output video in any resolution and format (from SD to 1080p, 24p/PAL/NTSC).
● Upscaling: high quality upscaling of DVD and any other SD video content to Full HD (1080p) or other HD resolution.
● File browser: convenient file browser with powerful file management (copy, move, delete, rename, organize, sort).

5
English
Extra Functions
● High-quality music playback: play very high-quality (up to 192 Khz / 24-bit) music files in various formats (FLAC,
Monkey’s Audio APE, WAV/PCM, DTS, etc).
● Playlists: build playlists from your folders, use your own playlists, use repeat and shuffle functions.
● NAS function: access files on storage devices (HDD, optical drive, etc) attached to the player from the local
network (using SMB or FTP).
● Customizable user interface: work with media collections using cover art and icon browsing (with Full HD graphics).
● Internet radio: playback and record various Internet radio stations (HTTP/MP3 and other formats).

6
Zappiti Player Mini Quick Start Guide
1. Zappiti Player Mini media player
2. Remote control (batteries may
not be included)
3. Wi-Fi antenna
4. IR extender
5. AV cable (3.5mm minijack to 3xRCA)
6. USB 3.0 (Host-Slave) cable
7. External power supply
8. HDMI cable
9. Ethernet cable
10. Quick start guide
NOTE: Additional items (optional) may be included into the package, depending on player configuration, region, and
distributor.
1 5
6
2
10987
3 4
Package Contents

7
English
1. USB 3.0 Slave
2. USB 2.0 host
3. Optical digital audio output
4. Wi-Fi antenna
5. 3.5 mm minijack AV out
6. HDMI 1.4
7. IR extender connector
8. Y/Pb/Pr (Component video) out
9. LAN 10/100/1000
10. Power switch
11. DC power 12V
Rear view
2354 6 7 8 9 10 111
Front view Side view (right)
Exterior
1. USB 2.0 host
2. SD card slot
1. HDD rack (2.5’’)
1. LED indicator
2. IR eye
Side view (left)
21
1
21

8
Zappiti Player Mini Quick Start Guide
Remote Control
1. Command indicator
2. TV — switch to TV mode. MUTE — turn the sound on/off. MODE — switch the video
output mode; control some other player functions. POWER — toggle the standby mode.
3. A (Red), B (Green), C (Yellow), D (Blue) — control some player functions.
4. 0–9 — enter numbers and text; control some other player functions such as direct access
by percentage: 1 = 10% / 5 = 50% / 0 = restart playback from the beginning.
5. SEARCH ZOOM — change the zoom factor for
the video content being played. SETUP — enter/leave the setup menu; adjust playback
settings during playback.
6. V+/V- (volume up / volume down) — adjust the volume.
7. P+/P- (page up / page down) — scroll up and down in various lists; control some other
player functions such as jump to 10 min forward or backward during playback.
8. Arrows , ENTER, RETURN, TOP MENU, POP UP MENU,
INFO — main buttons for controlling the player (navigate across the items on the screen,
open/use the currently selected item, go back to the previous screen, go to main menu,
show popup menu with actions, show information, control some other player functions).
Could be also used to control the playback position (1 min / 10 sec. forward / backward).
9.
— control the playback.
10/11. SUBTITLE, ANGLE/ROTATE, AUDIO, REC, , URL — switch the subtitles or audio
during playback and some other player functions.

9
English
NOTES:
● Use alkaline AAA batteries.
● Observe polarity when inserting batteries.
● Direct the remote control to the player. There must be no obstacles between the RC and the player.
● If RC functions only at short distances or stops functioning, make sure to replace the batteries.
● Some RC buttons may have several functions depending on the current player mode.
● Some RC buttons may be available only in certain player modes or only during playback of a certain content.

10
Zappiti Player Mini Quick Start Guide
Getting Started
Ensure there is enough space around the player for proper cooling. The space at each side should be not less than
10 cm.
Ensure the RC has batteries installed.
Connect the player to your TV and to other A/V equipment in an appropriate way. Use HDMI connection to get the
best possible quality of video and audio. Make sure to switch off the player and all relevant A/V equipment before
connecting them. Ensure your TV and other A/V equipment are configured to use proper inputs.
Switch on the player. The player will perform its initial loading procedure, which may take up to about 1 minute. During
the loading procedure, “ZAPPITI PLAYER” logo is shown on the TV.
●If you do not see “ZAPPITI PLAYER” logo on the TV when you switch on the player, it may mean some problem
with the connection between the player and the TV or that a wrong video input is chosen in the TV or A/V
receiver/switch. In such a case, recheck the cables and the settings of the TV or A/V receiver/switch, or try to use
different cables or a different way of connecting the player to the TV.
●If you see “ZAPPITI PLAYER" logo on the TV when you switch on the player, but then the picture disappears and
no other picture appears during at least 10 seconds, it may mean that a wrong video output mode is configured in the
player. In such a case, press the “REC” RC button, and then press one of the RC buttons “1”, “2”, “3”, “4” or “5”to
switch to a different video output mode (see "Quick Setting of Video Output Mode").
Finally, you should see the main screen of the player menu. The main screen shows items allowing to use different
player functions and access all storage devices and network drives connected to the player.
Adjust the player settings as needed using “SETUP” item on the main screen of the player menu. In particular, you may
want to adjust video settings, audio settings, and network settings.
To choose the language of the player menu, use “Setup / General / Interface language” setting.

11
English
Use the RC buttons , , , , “ENTER”, “RETURN”to navigate through the player menu. Use the
“POP UP MENU”RC button to show the list of available commands. Use the “INFO”RC button to show
the information about the selected item.
Quick Setting of Video Output Mode
The “REC” RC button allows quick setting of video output mode without entering the player setup
connecting your player to a TV.
Press the “REC” RC button and then one of the RC buttons “1”, “2”, “3”, “4”, or “5”to switch to one of the following
video output modes respectively:
1. Composite PAL
2. Composite NTSC
3. HDMI, 480i, 60 Hz
4. HDMI, 720p, 60 Hz
5. HDMI, 1080i, 60 Hz
After you see a picture on the TV, press the “ENTER” RC button, and then go to the player setup menu to perform
NOTE: The procedure of quick setting of video output mode can not be used during playback and in some other
cases. To ensure this procedure can be used, switch the player off, then switch the player on, and the wait about 1
minute to ensure the player loading is finished. After that press “STOP ”RC button to ensure playback is stopped.
Then use “REC”RC button.

12
Zappiti Player Mini Quick Start Guide
Connecting USB Drives
To connect a USB drive, ensure you are on the main screen of the player menu and connect the USB drive to an USB
port of the player. The player will recognize the USB drive, and will show an item corresponding to the USB drive on
the main screen.
USB drive. Power provided by the USB ports of the player may not be enough for correct functioning of the USB drive.
Do not disconnect or switch off the USB drive when some write operation is in progress.
Using Internal HDD
To insert the internal 2.5” SATA HDD, ensure you are on the main screen of the player menu, open the HDD rack door,
insert the HDD into the HDD rack and close the HDD rack door. The player will recognize the internal HDD, and will
show an item corresponding to the internal HDD on the main screen of the player menu.
Do not eject the internal HDD when some write operation is in progress.
It is recommended to use “green” HDD models with small RPM value, small heat emission, and small power consump-
tion; for more information, please see here:
http://dune-hd.com/support/hw_compat/
Using SD Memory Cards
To insert an SD memory card, ensure you are on the main screen of the player menu and insert the memory card into
the SD card slot of the player. The player will recognize the memory card, and will show an item corresponding to the
memory card on the main screen. Some SD memory cards may not be recognized by the player or may work incor-
rectly; in such a case, use other models of SD memory cards.
Do not eject the SD memory card when some write operation is in progress.

13
English
Using USB 3.0 Slave Function
To connect the player with an installed internal HDD via USB 3.0 Slave, connect the USB 3.0 Slave port
of the player to the USB host port of the PC. The PC will recognize a new USB device. After finishing
working with the player in the PC, ensure the USB device is correctly stopped in the PC (“Safely remove
hardware” or a similar function) and then disconnect the USB 3.0 Slave port of the player from the USB
host port of the PC.
Accessing Network Drives
To connect a network drive using SMB or NFS protocol, ensure you are on the main screen of the player
menu, press the “MENU” RC button, and choose “Create Network Folder”, then fill the parameters of the
network drive as needed. The player will show an item corresponding to the configured network drive on the
main screen.
To browse the list of network resources accessible via SMB or UPnP protocols, use “Network Browser” item
on the main screen of the player menu.
NOTE: If some network resources are not shown by the player, you may need to wait some minutes and then
retry (or press the “MENU” RC button and choose “Refresh” command).
Formatting HDD
To format an HDD attached to the player, select the HDD item on the main screen of the player menu,
press the “INFO” RC button and choose “Format Disk” (to format the entire disk) or “Format Partition”
(to format an already existing disk partition only). The player will format the disk. To format an unformatted
HDD, just press the “ENTER” RC button on the HDD item.
NOTE:To use disks formatted in EXT by the player on a Windows PC, you may need to install additional software
on the PC, such as “EXT2FSD” (http://www.ext2fsd.com/). To use disks formatted in NTFS by the player on
Windows PC, you may need to associate a Windows letter.

14
Zappiti Player Mini Quick Start Guide
Switching the Player On and Off
To put the player into the standby mode, press the “POWER” RC button. To exit the standby mode, press this buttons
again.
Depending on the player settings (see the player setup menu), the “hardware standby” or “software standby” mode
may be used. In the “hardware standby” mode, almost complete power-off takes place and the player consumes
almost no power. In the “software standby” mode, the player produces no signal on the video output, but is still
functioning. For example, if you have some storage devices connected to the player, you may still access them from
network (“NAS” function of the player). Exiting the “software standby” mode takes just a few seconds. When the
player is in the «software standby” mode, it still consumes significant power. It is not recommended to keep the player
in the “software standby” mode for a while if you do not need it.
To switch the player off completely, disconnect the power plug.
NOTE : After switching off the player completely or putting the player into the “hardware standby” mode,
it is recommended to wait about 1 minute before switching it on again.
NAS (Network Attached Storage)
You can access storage devices connected to the player from the local network using FTP and SMB protocols.
On a Windows PC, just type «ftp://ip_address» or «\\ip_address» in the Windows explorer, where «ip_address»
is the IP address of the player.
Wi-Fi
Your player is equiped with a built-in wireless LAN adapter. You can use it for connecting player to the local network
via Wi-Fi.

15
English
Limitations
Compatibility of the player with a particular hardware (A/V equipment, network equipment, disk drives, etc) may
of the player and the hardware, etc). If the player does not correctly work with a particular hardware, try to adjust the
-
ferent way.
Updating Your Player and Getting More Information
Zappiti Media Center
extend player
capabilities):
http://zappiti.com/firmwares
(Note: You can also connect the player to Internet and use the online firmware upgrade function, see Setup / Misc /
Firmware Upgrade.)
Please check here for more detailed and up-to-date documentation and information on player usage:
http://zappiti.com/manuals
http://zappiti.com/support and http://zappitiforum.com
Zappiti Player offers a “Zappiti Media Center” licence. Zappiti Media Center organizes automatically your media
collection (Movies, TV Shows, Musics) in categories and offers a simple, easy and stylish navigation by using cover arts
or album thumbnails browsing with synopsis and various media infos.
To know more about Zappiti Media Center and
“
Zappiti on Startup
”
feature, please use the following links:
http://zappitiforum.com
/
http://z
appiti.com

16
Zappiti Player Mini - Guide de démarrage rapide
Introduction
Caractéristiques principales
●
Le Zappiti Player Mini est un boîtier multimédia compact équipé d'un rack à disque dur 2,5'' à échange à haud
et d'un port Ethernet Gigabit et compatible Wi-Fi.
Processeur : Sigma Designs 8672/8673
●Lecteur disque dur : connectez un disque dur au lecteur et lisez directement son contenu.
●Lecteur réseau : connectez le lecteur Zappiti à un réseau local et accédez directement au contenu
depuis un PC ou un NAS via les protocoles UPnP SMB ou NFS.
●Lecteur MKV : lecture des vidéos HD et SD dans des conteneurs MKV et autres formats vidéo récents,
incluant des vidéos haute qualité à très fort débit jusqu’à plus de 50 Mbp/s.
●Support du format vidéo 3D : compatible avec les nouveaux format 3D tels que MVC, SBS, Top/Bottom.
●2 Ports USB : connectez facilement disques durs, clés USB, lecteurs de cartes USB et autres périphériques.
●Rack interne avec changement à chaud : insérez rapidement et facilement un disque dur interne 2.5” SATA.
●Port USB 3.0 Slave : transférez rapidement et facilement vos fichiers entre votre ordinateur et votre disque dur.
●Lecteur de cartes SD : lisez facilement vos fichiers photo et vidéo en provenance d’un camescope ou d’un
appareil photo ou utilisez une carte mémoire en tant que mémoire supplémentaire.
●HDMI 1.4 : pour une meilleure compatibilité avec les TV 3D, afficheurs et projecteurs les plus récents.
●Wi-Fi intégré : carte réseau sans fil intégrée et antenne.
●Sorties vidéo et résolutions multiples : depuis la résolution SD jusqu’à Full HD 1080p (24p/PAL/NTSC).
●Up-Scaling vidéo : mise à l’échelle de haute qualité de DVD (ou autre source SD) jusqu’à Full HD 1080p.
●Gestionnaire de fichiers avancé : grande facilité de gestion de contenu (copier, déplacer, effacer,
renommer, organiser, trier).

17
Français
Fonctions supplémentaires
● Fonction NAS : accédez aux fichiers sur des contenus externes (disque dur, lecteur optique, etc.) connectés au
lecteur ou depuis votre réseau local (via protocole SMB Server et FTP).
● Interface personnalisable : ajoutez vos propres papier-peints, boutons et téléchargez des thèmes Zappiti en option.
● Radio Internet : lecture et enregistrement de nombreuses stations de radio Internet.
● Navigateur Internet : surfez sur internet sur votre TV en utilisant le navigateur intégré.*
● Fonctions photo : diaporama, effets de transitions, rotation d'images, zoom, navigation dans les listes de lecture,
répétition, lecture mélangée (shuffle).
● Zappiti Media Center : système automatique de jaquettes (avec graphismes Full HD) pour les films, séries TV et
musiques avec posters et informations diverses (sous-titres, acteurs, réalisateur, date de sortie...). Nécessite un PC.
● Indexation automatique des films, et séries TV par genres (via Zappiti Media Center).
● Zappiti au démarrage : lancez automatiquement Zappiti via une option de réglage personnalisée.
● Télécommande Virtuelle : application optionnelle pour tablette / smartphone avec télécommande virtuelle
permettant de contrôler votre lecteur Zappiti Player Mini à distance sans fil.
● Plug-ins supplémentaires : profitez de nombreuses fonctionnalités supplémentaires optionnelles telles que le
téléchargement des sous-titres, les bandes-annonces, le contrôle parental ou des mires de réglages (prochaînement).
* Le navigateur Internet intégré est limité et peut ne pas fonctionner sur certains sites.

18
Zappiti Player Mini - Guide de démarrage rapide
Contenu de la boîte
1. Zappiti Player Mini
2. Télécommande (les piles peuvent ne
pas être fournies)
3. Antenne Wi-Fi
4. Report IR (infrarouge)
5. Câble audio-vidéo (Mini-jack > RCA)
6. Port USB 3.0 (Host-Slave)
7. Boîtier d’alimentation
8. Câble HDMI High Speed
9. Câble Ethernet
10. Guide de démarrage rapide
NOTE : des accessoires supplémentaires (optionnels) peuvent être inclus dans la boîte en fonction du pays,
du distributeur et de la configuration du lecteur.
1 5
6
2
10987
3 4

19
Français
Extérieur
1. Indicateur LED
2. Récepteur IR
1. Port USB 2.0 host
2. Slot pour carte mémoire SD
1. Bouton d’ouverture du rack
Face avant Côté (droit)
Côté (gauche)
21
1
21
1. Port USB 3.0 Slave
2. Port USB 2.0 host
3. Sortie audio numérique optique
4. Connecteur antenne Wi-Fi
5. Sortie AV (mini-jack 3,5 mm)
6. Sortie HDMI 1.4
7. Report IR
8. Sortie Vidéo Composante (Y/Pb/Pr)
9. Port réseau LAN 10/100/1000 (Gigabit)
10. Interrupteur Marche/Arrêt
11. Connecteur d’alimentation (12 V)
2354 6 7 8 9 10 111
Panneau arrière

20
Zappiti Player Mini - Guide de démarrage rapide
Télécommande
Indicateur de commande — clignote en réponse à la pression de touches.
TV — ouverture/fermeture du tiroir du lecteur optique*. MUTE — mise en sourdine du son.
MODE — changement de sortie vidéo ; peut s’appliquer à d’autres fonctions du lecteur.
POWER — mise en veille du lecteur.
A(rouge), B(Vert), C(Jaune), D(Bleu) — accès à certaines fonctions Blu-ray ; peut
s’appliquer à d’autres fonctions du lecteur comme la synchro audio/vidéo manuelle.
0-9 — clavier numérique et alphabétique ; peut s’appliquer à d’autres fonctions, comme
l’accès par pourcentage en cours de lecture (ex. : la touche 5 permet d’aller à 50%).
SEARCH — permet l’accès à une position définie durant la lecture. ZOOM — permet de
modifier le ratio d’agrandissement de l’image durant la lecture. SETUP — permet l’accès
et la sortie du menu réglages ainsi que la modification d’options en cours de lecture.
V+/V- (volume plus / volume moins) — contrôle du volume.
P+/P- (page plus / page moins) — défilement haut / bas dans diverses listes, peut
s’appliquer à d’autres fonctions du lecteur comme l’accès direct via la barre de temps.
Flèches (◄ ► ▲ ▼), ENTER, RETOUR, TOP MENU, POP UP MENU, INFO — touches
principales de contrôle du lecteur (navigation entre les options à l’écran, validation de
l’option sélectionnée, retour à l’écran précédent, aller au menu principal, affichage du
menu popup et de ses options, affichage des informations; peut s’appliquer à d’autres
fonctions du lecteur telles que la modification de la position de lecture via la barre de temps
(timeline).
— contrôle de lecture.
SOUS-TITRES, ANGLE/ROTATION, AUDIO — changement de sous-titres, rotation de
photo, changement de piste audio.
REC — démarrage/arrêt de l'enregistrement TV et radios à la volée, Z— fonction à venir.
URL — ouverture du navigateur Web.
* Dans le cas de l’utilisation d’un lecteur optique externe (non fourni).
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Table of contents
Languages: