Roku player Specification sheet

Hi!
Let’s get started.

What’s in the box
Roku player Remote control
2 x AAA
batteries for
remote
A/V cable
RCA to 3.5mm Power adapter

E
G
F
Get to know your Roku
B
C
D
Front view
Back view
A

Did you notice? Your Roku player has no on/o switch. It’s simpler that way
and draws very little power—less than a nightlight! Keep it plugged in so that
it can download the latest software updates automatically.
EA/V port – Connects your Roku player to a TV with the included A/V
cable (3.5mm to RCA). Provides standard definition quality only.
Power port – Connects your Roku player to a 120V AC power source with
the included power adapter.
GReset button – Resets your Roku player to its original factory settings
when pressed and held for 10 seconds (a feature you’ll rarely, if ever, use).
F
HDMI port – Connects your Roku player to an HDTV with an HDMI cable
(not included).
D
AStatus light – Flashes slowly when the Roku player starts up. Glows when
it’s on. Flashes once with each press of the remote control.
Storage expansion slot – Lets you increase your storage capacity for
Roku apps with a microSD card (optional, not included).
C
BIR receiver – Receives signal from the included Roku remote.

What you need
Roku
player
TV
(HD or standard definition)
High-speed Internet connection
(DSL or cable modem)
Wireless router
(any Wi-Fi)
A/V cable
(included)
HDMI cable
(sold separately)
OR

What to do Step 1
Ready for the step-by-step? We’ve only got four…
Connect your player
Connect your Roku player to your TV in one of two ways:
High definition: If you have an HDTV and want the best picture quality, use an
HDMI cable (not included) to make the connection depicted in the diagram below:
Did you know?Because HDMI outputs digital video and audio, you don’t
need a separate audio cable. HDMI also supports 5.1 surround sound (where
available). Got a receiver? You can also use HDMI to route video and audio
directly through your receiver if it supports HDMI video pass-through.
•Connect one end to the HDMI port on the back of your Roku player.
•Connect the other end to an open HDMI port on your TV.

What To Do Step 1 (continued)
Standard definition: If you have a standard-definition TV, do not have an HDMI
cable or do not have a free HDMI port on your TV, use the included A/V cable to
make the connection depicted in the diagram below:
•Connect one end to the composite video and analog audio ports on the back
of your TV (look for Video IN, then match the Yellow/Red/White ports).
•Connect the other end to the A/V port on the back of your Roku player.
It’s Special. The A/V cable included with your Roku player was custom-built for
Roku. Because the Roku 2 is so small, we use a single connector into the Roku
player to carry video and stereo audio.

What To Do Step 2
Power up key components
In this step, we’ll make sure all systems are GO!
First, power your Roku remote by inserting the included batteries:
•Turn the remote control over and locate the rectangular battery door on the
rear of the unit.
•Press the latch at the top of the battery door down while simultaneously
removing the battery door.
•Insert each battery negative (-) side first, pushing it into the coil and then into
the compartment. Do NOT insert batteries positive (+) side first. Place the
battery door back over the compartment and press it gently down until the
latch snaps securely into place.
Power Tip! Always replace dead batteries with two brand-new batteries from
the same manufacturer. Never use damaged batteries. If your remote gets
warm/hot during use, discontinue use and contact Roku Customer Support
immediately at support.Roku.com

What to do Step 2 (continued)
Next, power on your Roku player by connecting it to a wall outlet using the
included power adapter, like this:
Finally, power on your TV and look for a Roku message to fill the screen.
Blank screen? If your TV does not display a Roku screen, make sure your TV
input matches the physical connection used to connect your Roku player. Press
the Input button (also called Source) on your TV or TV remote to cycle through
the various video inputs available until you see a Roku screen.

Step 3
Configure your network
Step 3 establishes your network connection and brings out your inner geek. You
can do it!
Wireless: The Roku player will automatically detect wireless networks in your area,
so you can grab that Roku remote and jump right into Guided Setup. At wireless
set up, have your network name & password ready and do the following:
•Select your network from the list of available networks.
•Enter your network password, if you use one. Remember, network passwords
are case sensitive.
DOs and DON’Ts on where to place your Roku player:
•DO place your player within range of your wireless network.
•DON’T place your player in an enclosed cabinet; it may interfere with
the wireless signal.
•DON’T place your player beneath anything; it may cause the player to
overheat. Eeeeks.

What to do Step 4
Complete guided setup
It’s the final stretch and hooray—it’s a breeze! Continue following the on-screen
instructions and you’ll:
•Get the latest software.
•Select the video output resolution.
•Link the Roku player to your Roku account on your computer.
And setup is done...congratulations! Continue using that Roku remote, which you
can learn more about on the following pages, to personalize your channel line-up,
stream movies or play games. The fun part has just begun, we promise.
Your Roku account: During Guided Setup, you’ll be prompted to create
your Roku account online at Roku .com/link. Your Roku player will generate
a unique code that links your player to your new account. Roku accounts
are free and secure. And while a valid credit card number is required to
create your account, rest assured you will only be charged if you authorize
purchases of apps and games from the Roku Channel Store.

Know your Roku remote
The Roku remote should feel right at home in your hand. We designed it to be
incredibly intuitive for watching TV and navigating on-screen menus.

B
F
I
A
D
E
G
Know your Roku Remote (continued)
C
H

TIP: Make sure there are no obstructions between the remote and the IR
sensor on the front of the Roku player.
A[BACK] Return to previous screen
[HOME] Return to Roku home screen
[OK] Select an option from a menu
[UP] or [DOWN] Move up or down; [LEFT] or [RIGHT] Move left or right
[INST REPLAY] Replay last 7 seconds of video
[OPTIONS] View more options
[REV SCAN] Rewind, scroll left one page at a time
[PLAY/PAUSE] Start or pause playback
[FWD SCAN] Fast forward, scroll right one page at a time
B
D
C
F
E
G
H
I

If you are having trouble completing Guided Setup, don’t worry: It’s usually an
easy fix.
If you cannot see a picture on your TV:
•Make sure your TV is turned on. (This tip could save you some embarrassment.)
•Make sure the connectors on the cables between your Roku player and your
TV or home theater receiver are pushed in all the way.
•Make sure the video input on your TV or home theater receiver is set to match
the output (usually HDMI or composite video) used with the Roku player. Most
TVs have an Input button on the remote control to change video inputs.
•Make sure the power cable for the Roku player is connected snugly to the
Roku player on one end and to a workin power source on the other end. If the
Roku player is powered, the status light on the front of the unit will be on.
•If you are using HDMI with a home theater receiver, make sure the HDMI
cable from your Roku player is connected to an HDMI-in port on your receiver
and the HDMI cable from an HDMI-out port on your receiver is connected to
your TV.
Troubleshooting

If you cannot connect to your wireless home network during guided setup:
•If you are not getting 3 or more signal-strength bars above your wireless
network, adjust the location of your Roku player and/or wireless router. (See
tips on DOs and DON’Ts regarding Roku placement in Step 3.)
•Make sure there are no obstructions, like cement walls, between your Roku
player and your wireless router.
•Make sure you select the correct wireless router on the “Choose wireless
network” screen.
•Make sure you input the correct password, if your network is security-enabled
(password is case sensitive).
•If you have turned o SSID broadcasting on your wireless router, you can
add your network by selecting “Add network” from the “Select wireless
network” screen.
•If security is enabled on your network, temporarily disable it on your router and
try connecting again.

If you can’t hear sound:
•Make sure the connectors on the cables between your Roku player and your
TV or home theater receiver are pushed in all the way.
•Make sure the volume on your TV or home theater receiver is turned up and
isn’t on mute.
•If you connected your Roku player to a home theater receiver, make sure you
receiver is turned on.
•Make sure the input on your TV or home theater receiver matches the output
(HDMI or analog audio) used with your Roku player.
If the Roku remote control isn’t functioning:
•Point the remote directly at your Roku player.
•Try moving closer to your Roku player.
•Make sure the batteries are working and inserted properly into the remote (see
Step 2).
•Make sure the front of your Roku player is not obstructed.
•If the status light on the front of your Roku player flashes once each time you
press a remote button, the problem is not with the remote.
Troubleshooting (continued)
If you couldn’t find what you need:
Visit Roku .com/support for more help.

Roku.com/support
Get the most out of your Roku player.
Check out our FAQs, instructional videos and user forums.
© 2009-2013 by Roku , Inc. All rights reserved. Roku and the Roku logo are registered trademarks of Roku , Inc. Other brand and
product names are trademarks or registered trademarks of their respective holders.
Need more help?
©
4100000021-004