Zenty 153 User manual
(844) 200-1945 | [email protected] Page 2of 37 Copyright © Zenty AV
Attention!
This manual introduces functions, installations and operations for the PTZ camera in detail.
Please read this manual carefully before installation and use.
1. Caution
1.1 –Avoid damage to product caused by heavy pressure, strong vibration or immersion during transportation,
storage, and installation.
1.2 –Housing of this product is made of organic materials. Do not expose it to any liquid, gas, or solids which may
corrode the shell.
1.3 –Do not expose the product to rain or moisture.
1.4 –To prevent the risk of electrical shock, do not open the case. Installation and maintenance should only be
carried out by qualified technicians.
1.5 –Do not use the product beyond the specified temperature, humidity, or power supply specifications.
1.6 –Wipe it with a soft, dry cloth when cleaning the camera lens. Wipe it gently with a mild detergent if needed.
Do not use strong or corrosive detergents to avoid scratching the lens and affecting the image.
1.7 –This product contains no parts which can be maintained by users themselves. Any damage caused by
dismantling the product by user without permission is not covered by warranty.
2. Electrical Safety
Installation and use of this product must strictly comply with local electrical safety standards. The power supply of
the product is 12V, the max electrical current is 2A.
3. Install
3.1 –Do not rotate the camera head violently, otherwise it may cause mechanical failure.
3.2 –This product should be placed on a stable desktop or other horizontal surface. Do not install the product
obliquely, otherwise it may display inclined image.
3.3 –Ensure there are no obstacles within rotation range of the holder.
3.4 –Do not power on before complete installation.
4. Magnetic Interference
Electromagnetic fields at specific frequencies may affect the video image. This product is Class A. It may cause
radio interference in household application. Appropriate measure is required.
(844) 200-1945 | [email protected] Page 3of 37 Copyright © Zenty AV
Table of Contents
1. Camera Installation............................................................................... 5
1.1 Camera Introduction ................................................................................................ 5
1.2 Power-on Initial Configuration................................................................................. 5
1.3 Video Output ............................................................................................................ 6
1.4 Mounting Brackets ................................................................................................... 6
1.4.1 Wall Mounting ............................................................................................................... 6
1.4.2 Ceiling Mounting............................................................................................................ 7
2. Product Overview ................................................................................. 8
2.1 Product Introduction................................................................................................ 8
2.1.1 Dimensions..................................................................................................................... 8
2.1.2 Accessories..................................................................................................................... 9
2.2 Main Features........................................................................................................... 9
2.3 Technical Parameters ............................................................................................. 10
2.4 Interface Instructions ............................................................................................. 12
2.4.1 External Interface......................................................................................................... 12
2.4.2 RS-232 Interface...........................................................................................................13
3. Video Output ...................................................................................... 14
3.1 Video Output .......................................................................................................... 14
3.1.1 Power-On Initial Configuration.................................................................................... 14
3.1.2 Video Output................................................................................................................ 15
3.2 Remote Control ...................................................................................................... 15
3.2.1 Keys Introduction......................................................................................................... 15
3.3 Menu Introduction ................................................................................................. 17
3.3.1 Main Menu................................................................................................................... 17
3.3.2 System Settings............................................................................................................ 18
3.3.3 Camera Settings........................................................................................................... 19
3.3.4 P/T/Z Settings............................................................................................................... 24
3.3.5 Version ......................................................................................................................... 24
3.3.6 Restore Default............................................................................................................ 25
(844) 200-1945 | [email protected] Page 4of 37 Copyright © Zenty AV
4. Serial Port Communication and Control .............................................. 25
4.1 VISCA Protocol List ................................................................................................. 26
4.1.1 VISCA Protocol Return Command................................................................................ 26
4.1.2 VISCA Protocol Control Command............................................................................... 27
4.1.3 VISCA Protocol Inquiry Command ...............................................................................31
4.2 Pelco-D Protocol Command List............................................................................. 32
4.3 Pelco-P Protocol Command List ............................................................................. 33
5. Maintenance & Troubleshooting......................................................... 34
5.1 Camera Maintenance ............................................................................................. 34
5.2 Troubleshooting ..................................................................................................... 34
6. Warranty ............................................................................................ 35
7. Mail-In Service .................................................................................... 35
8. Limited Warranty Limits and Exclusions .............................................. 35
(844) 200-1945 | [email protected] Page 5of 37 Copyright © Zenty AV
1. Camera Installation
1.1 –Camera Introduction
1.2 –Power-on Initial Configuration
1. Power-on: Connect DC 12V power supply adapter with power supply socket
2. Initial Configuration: The remote-control receiving indicator flashes after power on, the pan-tilt turns
left to the lowest left to the lowest, and then turns to the HOME position (both horizontal and vertical
positions are in the middle), while the movement first shrinks and then stretches. When remote-control
receiving indicator stops flashing, the self-checking is complete.
Notes:
1. After power on and self-checking, the camera will automatically return to the preset 0 position if it’s
pre-set.
2. The default address for the IR remote control is 1#. If the menu restored to factory defaults, the
remote-control default address will restore to 1#.
(844) 200-1945 | [email protected] Page 6of 37 Copyright © Zenty AV
1.3 –Video Output
USB 2.0 Video Output
A. USB 2.0 video cable connection: as shown in Figure 1.1 label 9
B. Connect the camera and the computer via USB2.0 video cable, open the video software and select the
image device to output the video.
1.4 –Mounting Brackets
Notes: Ceiling or wall mounting brackets can only be mounted on template and concrete wall. For safety
reasons, plasterboard is not recommended.
1.4.1 –Wall Mounting
(844) 200-1945 | [email protected] Page 8of 37 Copyright © Zenty AV
2. Product Overview
2.1 –Product Introduction
2.1.1 - Dimensions
(844) 200-1945 | [email protected] Page 9of 37 Copyright © Zenty AV
2.1.2 –Accessories
Please check below for standard and optional accessories when unpacking the box.
Standard Accessories
Optical Accessories
Power Adapter
Wall Mount
IR Remote Control
Ceiling Mount
RS232 Cable
User Manual
USB2.0 Cable
2.2 –Main Features
This series camera has perfect functions, superior performance, and rich video output interfaces.
Featuring advanced ISP processing algorithms, offering vivid and high-resolution video with a strong
sense of depth and fantastic color rendition.
•Full HD Resolution: 1/2.9 inch high quality CMOS sensor. Resolution is up to 1920x1080 with
frame rate up to 30 fps
•Multiple Optical Zoom Lens: 3x/10x optical zoom lens
•Leading Auto Focus Technology: Fast, accurate, and stable auto focusing technology
•Low Noise and High SNR: Super high SNR image is achieved with low noise CMOS. Advanced
2D/3D noise reduction technology further reduces the noise while ensuring high image clarity
•Control Interface: RS485, RS232 (cascade connection)
•Multiple Control Protocols: Supports VISCA, PELCO-D, PELCO-P protocols; Supports automatic
identification protocols
•Quiet Pan / Tilt Movement: With high accuracy step driving motor, camera can pan / tilt
extremely quiet and smoothly
•Multiple Presets: Up to 255 presets (10 presets via remote control)
•Multiple Applications: Online-education, Lecture capture, Webcasting, Video conferencing,
Tele-medicine, Unified Communication, Emergency command and control systems, etc.
2.3 –Technical Parameters
(844) 200-1945 | [email protected] Page 10 of 37 Copyright © Zenty AV
Model
ZT-PTZU10
Sensor
1/2.9 inch high-quality CMOS sensor
Effective Pixels
2.07 megapixels, 16:9
Video Format
H264/H265/MJPG: 1920*1080P@30/25/20/15/10/5fps |
1280*720P@30/25/20/15/10/5fps | 960*540@30/25/20/15/10/5fps |
800*600@30/25/20/15/10/5fps | 720*576@30/25/20/15/10/5fps |
720*480@30/25/20/15/10/5fps | 640*480@30/25/20/15/10/5fps |
340*360@30/25/20/15/10/5fps | 352*288@30/25/20/15/10/5fps |
320*240@30/25/20/15/10/5fps
View Angle
8.8° ~ 68.8°
Focus Length
f=4.34mm ~ 35.17mm
AV
f1.85 –f2.63
Optical Zoom
10x
Digital Zoom
10x
Minimum Illumination
0.5Lux(F1.8, AGC ON)
DNR
2d & 3D DNR
White Balance
Auto / Manual / One
Push//3000K/3500K/4000K/4500K/5000K/5500K/6000K/6500K/7000K
Focus
Auto / Manual / One Push Focus
Exposure
Auto / Manual
BLC
On / Off
Video Adjustment
Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gamma curve
SNR
>50dB
Input/Output Interface
(844) 200-1945 | [email protected] Page 11 of 37 Copyright © Zenty AV
Video Output
USB2.0 Interface, A Type Interface
Video Compression Format
MJPG, H.264, H.265
Control Interface
RS232 (In/Out), RS485
Control Protocol
VISCA/Pelco-D/Peclo-P
Power Interface
HEC3800 Outlet (DC12V)
USB Features
Operating Systems
Windows 7/8/10, Mac OSX, Linux
Video Compression Format
MJPG/H264/H265
USB Communication Protocol
UVC
PTZ Parameters
Pan Rotation
-170° ~ +170°
Tilt Rotation
-30° ~ +30°
Pan Control Speed
0.1 ~ 60°/sec
Tilt Control Speed
0.1 ~ 40°/sec
Preset Speed
Pan: 60°/sec, Tilt: 40°/sec
Preset Number
255 Presets (10 presets via remote control)
Other Parameters
Input Voltage
12V
Input Current
Maximum: 4.98A
Power Consumption
Maximum: 2.5W
Stored Temperature
-40°C ~ +70°C
Storage Humidity
20% ~ 90%
Working Temperature
-10°C ~ +50°C
Working Humidity
20% ~ 80%
Dimensions (W*H*D)
156.8mm x 112.6mm x 139.5mm
Weight
2.20lbs
Application
Indoors
(844) 200-1945 | [email protected] Page 12 of 37 Copyright © Zenty AV
Package Contents
Power Supply, RS232 Control Cable, IR Remote
Control, User Manual, Warranty Card, USB2.0
Cable
Optional Accessories
Ceiling / Wall Mount (Not Included)
2.4 –Interface Instructions
2.4.1 External Interface
2.4.2 RS-232 Interface
(844) 200-1945 | [email protected] Page 13 of 37 Copyright © Zenty AV
RS-232 Interface Definition:
RS-232 Mini-DIN 8-pin Port Definition:
RS232(DB9) Port Definition:
(844) 200-1945 | [email protected] Page 14 of 37 Copyright © Zenty AV
VISCA Networking as shown below:
3. Video Output
3.1 Video Output
3.1.1 Power-On Initial Configuration
The remote-control receiving indicator flashes after power-on, the pan-tilt turns left to the lowest left to
the lowest, and then turns to HOME positions (both the horizontal and vertical positions are in the
middle), while the movement first shrinks and then stretches. When remote control receiving adapter
indicator stops flashing, the self-check is complete. After power-on and self-checking, the camera will
automatically return to the preset 0 position it it’s pre-set.
(844) 200-1945 | [email protected] Page 15 of 37 Copyright © Zenty AV
3.1.2 Video Output
Connect the video output cable; users can refer to Figure 1.1 regarding product interface.
USB2.0 Output: Connect the camera with the computer USB2.0 interface (black), open the Device
Manager to see whether there is an imaging device and whether the USB controllers recognize the
USB2.0 device. After properly identified, open the software, choose the imaging device, and then it will
output the image.
3.2 Remote Control
3.2.1 Keys Introduction
(844) 200-1945 | [email protected] Page 17 of 37 Copyright © Zenty AV
3.3 Menu Introduction
3.3.1 Main Menu
In normal working mode, press “Menu” key to display the menu, using scroll arrow to point at or
highlight the selected items.
(844) 200-1945 | [email protected] Page 18 of 37 Copyright © Zenty AV
Setup: System parameter setting
Camera: Camera parameter setting
P/T/Z: Enter into sub menu
Version: Enter into sub menu
Restore Default: Enter into reset setting, select YES or NO to confirm
|↑↓| Select: For selecting menu
|←→| Change Value: For modifying parameters
|MENU| Back: Press [Menu] to return
|Home| OK: Press [Home] to confirm
3.3.2 System Settings
Move the pointer to the (Setup) in the Main Menu, click the [Home] key and enter in to the (System
Setting) as shown below:
(844) 200-1945 | [email protected] Page 19 of 37 Copyright © Zenty AV
Protocol: VISCA/Pelco-P/Pelco-D/Auto
VISCA Address: VISCA = 1~7 | Pelco-P = 1~255 | Pelco-D = 1~255
Baudrate: 2400/4800/9600/115200
VISCA Address Fix: On/Off
Auto Flip: On/Off
Sleep: On/Off
3.3.3 Camera Settings
Move the pointer to the (CAMERA) in the Main Menu, click the [Home] key and enter the (CAMERA) as
follow:
Exposure: Enter into Exposure setting
Color: Enter into color setting
Image: Enter into image setting
Focus: Enter into focus setting
Noise Reduction: Enter into noise reduction setting
•Exposure Setting
Move the pointer to the (EXPOSURE) in the Main Menu, click the [Home] key and enter into the
(Exposure sub menu) as shown below:
(844) 200-1945 | [email protected] Page 20 of 37 Copyright © Zenty AV
Mode: Auto, Manual, Shutter priority, Iris priority, and Brightness priority
EV: On/Off (Only available in Auto mode)
Compensation Level: -7~7 (only available in auto mode when EV is ON)
BLC: On/Off for options (only available in auto mode)
Anti-Flicker: Off/50Hz/60Hz for options (only available in Auto/Iris priority/Brightness priority modes)
Gain Limit: 0~20 (only available in Auto/Shutter priority mode)
WDR: Off, 1~8
Shutter Priority: 1/25, 1/30, 1/50, 1/60, 1/90, 1/100, 1/120, 1/180, 1/250, 1/350, 1/500, 1/1000,
1/2000, 1/3000, 1/4000, 1/6000, 1/10000 (only available in Manual and Shutter priority modes)
IRIS Priority: Off, F11.0, F9.6, F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2.8, F2.4, F2.0, F1.8 (only available in
Manual and Iris priority modes)
Brightness: 0~23 (only available in Brightness priority mode)
•Color
Move the pointer to the (COLOR) in the Main Menu, click the [HOME[ and the (COLOR sub menu) as
follow:
This manual suits for next models
1
Table of contents
