Mount your Zepp Baseball Sensor
Start by attaching the mount to the knob of the bat. Once mounted to the
bat insert the sensor into the mount and press firmly to ensure a secure
fit.
Capture a Swing
Once you have established Bluetooth connection and mounted the sensor
to your bat you’re almost ready to capture a swing.
1. Open the app. Follow the steps to create your account if you haven’t
done so already.
2.Wait for the yellow sensor icon to appear and become solid in the upper
left corner of the Home Screen. ( 1 ) Once the light becomes solid, the
app will ask you to calibrate the sensor. We recommend calibrating the
sensor prior to each swing session. If you are not asked to calibrate or
wish to recalibrate the sensor, tap the yellow sensor icon.
3.Select “Swing Now” ( 2 ) to open the 3D view as this screen is the main
swing screen. Once in the 3D view, select the bat you are using by
tapping the bat icon in the located next to the calibration icon. ( 3 )
4.Step up to the plate, take a swing, and make contact with the ball! !Each
time you make contact with a ball the app will replay your 3D swing
within a few seconds.!
Note - Making contact with a ball is required to capture a swing.
