ZEPP GOLF User manual

ZEPP GOLF USER GUIDE
Updated April 30, 2015

Getting Started 1
What’s Included 1
iOS & Android Requirements 1
Downloading the Zepp Golf App 1
Turning on your Zepp Sensor 2
Pairing your Zepp Sensor 2
Getting to know the Zepp Sensor 4
Mounting your Zepp Golf sensor 5
Capture a Swing 5
Flash Storage Capability 6
Battery Life, Charging and Power 6
Firmware Updates 7
Multi-Sport Functionality 7
Favorite a Swing 7
Storage 7
LED Indicator Lights 8
Getting to know the Zepp App 9
What the Zepp Sensor Measures 10
Home Screen 10
TABLE OF CONTENT

3D View 11
Dashboard View 11
Video View 11
My History 11
Cloud Sync 12
Pro Players 12
Training Center 12
Set Goals and Track Improvement 12
Lab Reports 13
Zepp Insights 13
Multi-Player Management 13
Control Center 15
Compare a Swing 15
Share a Swing 15
Screen Lock 15
Delete a Swing 16
Low Battery Indicator 16
Practice Swings 16
General Information & Specifications 17
App Updates 18

Using your Zepp in Wet Conditions 18
Customer Support 18
Technical Specifications 18
Return Policy and Warranty 18
Regulatory and Safety Notices 19

Getting Started!
ZEPP GOLF USER GUIDE
Page 1

What’s Included iOS & Android Requirements
iPhone 4S+, iPad 2nd Generation+, iPod Touch 5th Generation
-iOS 7.0 or later
-Android - v4.1 or later
Downloading the Zepp Golf App
You will need to download the free Zepp Golf app to use your sensor or
the video feature.
1. Click on the App Store or Google Play icon on your iOS or Android
device.
2. In the search toolbox, enter Zepp Golf.
3. There will be an icon with an add feature that says "Free" for iOS users
and "Install" for Android users. Click this icon. A new green icon will
appear asking "Install App”. Tap it.
4. Once the download is complete you can find Zepp Golf on your device.
ZEPP GOLF USER GUIDE
Page 1

Turning on your Zepp Sensor
To turn it on, press in from the side towards the LED channel (see image
below). You should feel the button push in slightly when you do this. Hold
for at least 4 seconds when pushed in. If it doesn't turn on try holding a
bit longer and adjusting your finger to the top corner.
Pairing your Zepp Sensor
Pairing an iOS Device
1. Select the Settings icon and then select Bluetooth.!If Bluetooth is not
enabled, turn it on.
2. Your iOS device will automatically search for Zepp. This will take
approximately 15-30 seconds.!Once found, a pop up "Bluetooth Pairing
Request" will appear. !Select Pair.
3. When paired, your device will note Zepp “Connected”.
4. After connection has been established, another pop up will appear
asking you to allow Zepp to communicate with the ZEPP App. !Select
Allow.
5. From this point on, your iOS device will automatically pair with Zepp
Golf. !Unless if you turn Bluetooth off or unconnected Zepp by selecting
“Forget this Device”, you will not need to pair the device when you turn
on your Zepp.
ZEPP GOLF USER GUIDE
Page 2

Pairing an Android device
1. Select the Settings icon and then select Bluetooth.!If Bluetooth is not
enabled, turn it on.
2.With some Android OS, you may receive a pop up message to let you
know the Bluetooth is paring with your Zepp device. Select "OK".
3.It will take approximately 15-30 seconds for Zepp to pair with the
device. When paired, your device will note Zepp “Paired”.
4.From this point on, your Android device will automatically pair with
Zepp. !Unless if you turn Bluetooth off or unconnected Zepp, you will
not need to pair the device when you turn on your Zepp.
Note - The Zepp sensor can only connect to one mobile device at a time.
If you would like to pair the sensor to a second mobile device, you must
first un-pair it from the initial mobile device.
ZEPP GOLF USER GUIDE
Page 3

Getting to know the Zepp Sensor!
ZEPP GOLF USER GUIDE
Page 4

Mounting your Zepp Golf sensor
Slide the sensor into the golf mount ensuring a secure fit. After you have
inserted the sensor, attach the mount to the glove by sliding it over the tab
of your glove so that it fits squarely in the center.
Capture a Swing
Once you have established Bluetooth connection and mounted the sensor
to your golf glove you’re almost ready to capture a swing.
1. Open the app. Follow the steps to create your account if you haven’t
done so already.
2.Wait for the yellow sensor icon to appear and become solid in the upper
left corner of the Home Screen. ( 1 ) Once the light becomes solid, the
app will ask you to calibrate the sensor. We recommend calibrating the
sensor prior to each swing session. If you are not asked to calibrate or
wish to recalibrate the sensor, tap the yellow sensor icon.
3.Select “Swing Now” ( 2 ) to open the 3D view as this screen is the main
swing screen. Once in the 3D view, select the club you are using by
tapping the club icon in the located next to the calibration icon. ( 3 )
4.Set up and take a swing! !Each time you make a swing the Zepp Golf app
will show your swing in the app within a few seconds.!Simply continue
swinging after capturing your first swing in order to capture another
swing. Swings can be captured when making contact with a ball as well
as when taking dry swings.
ZEPP GOLF USER GUIDE
Page 5
2
3
1