ZEROBEND Tee-Up Foldaway User manual

The ‘Tee-Up’ Foldaway - Instructions
!1
The Tee-Up Foldaway – Extend your Golfing Life
The device that folds, so you don’t have to!
For further demonstrations on how to use product visit our website;
COMPONENTS
A) Tee up foldaway
B) Tee collector
A
B

The ‘Tee-Up’ Foldaway - Instructions
!2
Folded Position
The Photo on the right shows the ‘Tee-Up’ in the folded
Position.
>To fold device gently pull the two parts of the shaft away
from each other then fold the two sections over one another
so that the trigger handle folds neatly in-between the jaws
and the stabiliser tube.
Extended Position
>To revert device back to the extended position simply
reverse the above process.

The ‘Tee-Up’ Foldaway - Instructions
!3
Left or Right Handed? - Simple Adjustment
>Tee-up is supplied to you in ‘Right Handed’ orientation
as shown in photo. When extended the two arrows on
the shaft are both displayed on the same side of the
device.
>For left handed orientation, one arrow shows on top
the other on the bottom. Simply gently pull apart the
shaft and twist one end around to setup into the ‘Left
Handed’ orientation.
*********** Warning **********
To avoid unnecessary strain on the trigger cord
ensure that the trigger is in the released position
(Jaws open) prior to pulling the shaft apart.

The ‘Tee-Up’ Foldaway - Instructions
!4
Loading the Tee-Up
>With the Jaws of the device open (trigger released) simply
place the golf ball between the jaws and allow it to lay on top
of the black Stabiliser Tube. You may find laying the end of
the Tee-Up onto your golf bag helps provide additional
stability when loading the device.
>With your other hand take a tee and insert it between the
jaws and push it up against the ball. Now close the jaws using
the trigger. To ensure the tee-peg will set easily into the
ground check that the tee is pushed up against the ball and is
in a vertical position. The device is now loaded and you are
ready to tee up the ball.
Jaws
Stabiliser

The ‘Tee-Up’ Foldaway - Instructions
!5
Teeing Up the Ball
>Vertically press the tee into the ground to the desired height.
Gently release the trigger to open the jaws and whilst keeping
the base of the tube placed on the ground allow the ‘Stabiliser’
to rise slowly until it is clear of the ball.
>When clear of the ball, gently move the jaws sideways away
from the ball. You are now ready to hit a sweet shot!
What to do with your device after Teeing up?
>Simply drop the device to the ground, play your shot and
then retrieve it by hooking the end of your club through the
Dedicated Loop

The ‘Tee-Up’ Foldaway - Instructions
!6
Retrieving Tee
1. Use the Jaws only to gently collect the tee. (Photo A).
OR - if you are having difficulty (because of the style of tee used
for example) then why not try using the “TC” as described
below.
2. Attach the supplied “TC” to the Stabiliser tube. (This can now be
left on the device permanently if you wish).
3. Place the “TC” inside the jaws which should then be partly
closed. (Photo B).
4. Position the Tee-Up stabiliser tube end close to the tee peg,
lower with the jaws partially open and place the “TC” over the
tee peg. (Photo C).
5. Push the device down and over the tee then close the jaws to
retrieve it. (Photo D).
Note:- The “TC” should also be placed inside the jaws when folding
TC
A
B
C
D

The ‘Tee-Up’ Foldaway - Instructions
!7