ZIMSTONE X FRAME Manual

X FRAME INSTRUCTION GUIDE
PREMIUM DISPLAY EQUIPMENT & MEDIA
Available in
Small: 600 X 1600mm
Medium: 800 X 1800mm

This kit includes
The Main Support Section comes fully assembled
and features a simple open and close mechanism
for easy assembly and fold-away.
Main Support Section
The Central Pole Hub features
four holes that hold the poles together
and provide support for the banner.
Central Pole Hub
Eyelet hook Fibreglass Rods
Two fibreglass rods for the
upper section connected to the
pole supporting center.
Carry Bag
This item ships in a handy
drawstring carry bag to
store the product when
not in use.
The eyelet hooks are
attached on the top
of the fibreglass rod to
mount printed banner
on the structure.
Note: You will require a
10mm eyelet on each
corner of the print to go
over the eyelet hook.

2
3
1
Insert rods into allocated
points on Central Pole Hub.
Once rods are con-
nected, rotate the
eyelet hooks to face
towards the front.
Draw out the legs to create a triangular base.
Pull the centre leg for ease of expansion.
Remove contents from bag and take hold of the Main Support Section.

Textiles available. Sold separately.
www.pbtex.co.za
4Mount printed banner on the frame by attaching
the four corner eyelets on each hook.
Ensure that hooks are
facing outwards
before hanging the
printed banner.
Download Artwork Templates here:
www.zimstone.co.za/product-templates