ZIMX GYROOR G2 Pro User manual

.com
UKBIGBUY
Saving you money every day
Partnership
V 2.0
G2
Made
in
China
(ENG)
Pro
ZIM
H O V E R B O A R D S
W I T H A T T I T U D E

ZIM
H O V E R B O A R D S
W I T H A T T I T U D E

12-15
07-10
11
16
06
17-18
Customer Service Support---------19

IMPORTANT! Read Carefully and keep for future reference

Wheels

Re-Calibration /
IndicatorIndicator

(Flashing blue)
(Blue)
(Blue)
(Blue)
If the indicator light is flashing, there is an issue with the scooter (low battery, over speed,
power issue, etc)
Warning!! : Danger of injury. Do not use product if the battery is less than 10%. This will
prevent damage to the battery and to your product. Please immediately charge your battery fully.
Power and the blue light flashing about 10% or less power.
Battery Indicator
blue.
If the left indicator as the picture below is battery indicator, it’s blue about 11%-100%

G2Pro
On your device, locate the Bluetooth device list. Select “G2 Pro” from the list.

Steps to turn OFF this feature
1. Put the product on a level surface and turn it on.
2. Long press the power button for 3-5 seconds until you
hear a short beep tone for 3 times
3. The No-Fall Technoloy mode is now turned OFF.

45

Only use the product in accordance with local regulations

<120kgs
Two 2
2 to 3 hours
700W
662*214*241 mm / 26*8.4*9.5 inches
12-15km/h
10-12km
4.0Ah, 36V, 148Wh

If you will not use the product for 30 days, please charge the battery completely.
Please fully charge the battery after 90 days. Otherwise the battery could discharge itself and be damaged
so it will loose its charging capacity. Please note that this kind of damage is not covered by the warranty.