zkivision ZKIR3 Series User manual

User’s Manual for ZKIR3 Series IR Day & Night
Weatherproof Bullet IPC
Document Version: 1.7
Date: 2012.10
Introduction
This document mainly introduces the functional features, installation process and
access methods of ZKIR3 series IPC.

Important Notices
Thanks for selecting our company’s IPC. Before use, please read through the user’s
guide to avoid any unnecessary damage!
All functions depend on the actual product. Since the product is subject to updating,
our company is not responsible for any difference from this guide and not liable for
any dispute over different technical parameters from this guide. The project is
subject to any change without notice.
To learn more, please visit our company’s website www.zkivision.com or local
office.

Table of Contents
I
Table of Contents
1 Overview ............................................................................................................... 1
1.1 Product Description..................................................................................... 1
1.2 Product Features.......................................................................................... 1
1.3 Technical Parameters................................................................................... 3
1.4 Product Appearance..................................................................................... 5
1.5 Connecting Terminal.................................................................................... 6
1.6 Basic Procedure..........................................................................................10
2 Installation and Network Configuration ...........................................................11
2.1 Hardware Installation..................................................................................11
2.2 Operating Environment ..............................................................................15
2.3 Network Connection...................................................................................15
3 Accessing device...................................................................................................17
3.1 Using Browser............................................................................................17
3.2 Using RTSP Media Player..........................................................................19
3.3 Using Mobile Devices ................................................................................21
3.4 Using Video Surveillance Software............................................................23

Overview
1
1 Overview
1.1 Product Description
ZKIR3 colored 24h weather proof IPC employs the design of aluminum alloy up to
the IP66 protection.
This product adopts two-megapixel CMOS sensor or high-quality SONY CCD
sensor and is featured by IR lamp with long-distance and wide-range projection and
favorable night viewing. The optimized H.264 coding algorithm ensures its clearer
and smoother video transmission. The embedded Web Server allows a user’s
real-time monitoring and remote control of PTZ conveniently by means of browser.
This product has mega pixels (high definition, HD) or pixels (standard definition,
SD) optional and is wall-mounted. It is easy to install, convenient to operate and
universal indoor and outdoor. It is suitable for all-weather monitoring the
short-distance wide-angle places with high protection rating, such as, communities,
factories and banks, etc., and any cases in need of remote network video.
1.2 Product Features
Hi3512 high-performance multimedia processor, supporting H.264 Main
Profile video coding
Dual code stream, suitable for various networks
Support all kinds of protocols, such as, TCP/IP, HTTP, TCP, UDP, ARP,
SMTP, FTP, DHCP, DNS, DDNS, NTP and UPNP, etc.
Aluminum alloy with IP66 protection and extremely strong resistance to dust,
water, corrosion and impact
Large sunshade to well protect the machine from sunshine for cooling, and
more suitable for outdoor application
Snap-on base to simplify the installation

User’s Manual for ZKIR3 Series IR Day & Night Weatherproof Bullet IPC V1.7
2
Safe and reliable socket head lock screws
Double-glass front cover for better optical isolation and mist prevention
surface for better night viewing
Three-layer shield +magnetic ring design to eliminate signal interference
Numerous additional functions, e.g. alarm, audio talkback, 485 control, TF
card and reset, etc.
Support Ethernet power supply (PoE 802.3af regulation) (optional)
Support WIFI (802.11b/g/n standard) wireless network module (optional)
IR-Cut filters to automatically switch between day and night for optimal
monitoring
Double web indicator lamps for easy judgment of web status
Analog video output interface (for HD) to facilitate site commissioning
Self-recovery from abnormality and auto reconnection after network
interruption
Automatically capture images during an alarm and send them to the designated
email
Support motion detection and external detector alarm
Allow setting several alarm times and support the remote alarm linkage
Support dynamic IP (DHCP) and dynamic domain name system (DDNS)
Network time synchronization (NTP)
HD cam to support the browsing by 14 users simultaneously, 4 in primary
code stream and 10 in secondary code stream
SD cam to support the browsing by 20 users simultaneously, 10 in primary
code stream and 10 in secondary code stream

Overview
3
1.3 Technical Parameters
Product Name
IR Waterproof Bullet IPC
Product Model ZKIR372 ZKIR373 ZKIR352 ZKIR353
Cam Properties
Image Sensor 1/3" Megapixel Progressive
CMOS Sensor
1/3.2" Two-megapixel
Progressive CMOS Sensor
Image Resolution
WDR HD
HD
1280×720
Day/Night Switch
IR-Cut filter switch
Type of Lens 12mm fixed lens for ZKIR373/353/343/323, 4mm fixed lens for others
Minimum Illumination
1 Lux (IR lamp off), 0 Lux (IR lamp on)
IR Lamp 48 pcs Φ5 IR lamps
Effective Projection
Distance
10-15m 20-30m 10-15m 20-30m
IR Projection Angle 60° 25° 60° 25°
Video Coding
Primary Processor Hi3512
Operating System
Embedded Linux
Video Compression
Algorithm H.264 main profile level 3
Audio Compression
Algorithm
G.726/G.711
Video Compression Code
Rate 32~6114 Kbits/s adjustable
Video Resolution
Primary Code Stream: 1280x720
Secondary Code Stream: 320x240
Video Frame Rate
1~25 frames optional
Video WDR HD Brightness, Saturation, Contrast, Illumination, Sensitivity, Shutter,

User’s Manual for ZKIR3 Series IR Day & Night Weatherproof Bullet IPC V1.7
4
Parameters Image Up/Down, Image Left/Right, Night Vision Mode, Wide
Dynamic Mode adjustable
HD Brightness, Saturation, Contrast, Image Up/Down, Image Left/Right
adjustable
Functional Interfaces
Audio Interface
1 Mic input and 1 linear output (optional)
Alarm Input 1 alarm input (normally opened or normally closed) (optional)
Alarm Output
1 switch output, maximum working voltage:AC 120V/1A, DC 24V/1A
Motion Detection Allow 4 independent detection areas
Control Interface
1 RS485
Memory Support TF card for video storage and image capture, 32G maximum
(optimal)
Network Interface
10Base-T/100Base-TX Ethernet interface
WiFi 802.11b/g wireless (optional)
Supported Network
Protocols
TCP/IP, HTTP, TCP, ICMP, UDP, ARP, IGMP, SMTP, FTP, DHCP,
DNS, DDNS, NTP, UPNP and RTSP, etc.
Working Environment
Input Power DC 12V, ≥1.5A
PoE Ethernet power supply: comply with 802.3af regulation (optional)
Max Power Consumption
10W
Working Temperature -20~+55 °C
Working Humidity
10%~95% RH
Level of Protection IP66
Installation Mode
Wall Mount

Overview
5
1.4 Product Appearance
..............................Stereoscopic Drawing
..............................Dimensional Drawing (in mm)
Left View
Fixed Base
Wall-mounted
Support
Camera
Upper
Cover

User’s Manual for ZKIR3 Series IR Day & Night Weatherproof Bullet IPC V1.7
6
Front View
1.5 Connecting Terminal
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
1. Power Interface: Connect to the adapter. The device employs the power
supply of DC 12V and no lower than 1.5A. Do not use any different power
supply as it may damage the device.
2. Network Interface: 10/100M self-adapting Ethernet interface is used to
connect the device with various network equipments, such as, switch, router
and hub. When it is connected to 10M network, the orange lamp is on. When it
is connected to 100M network, the green lamp is always on.
This interface can also employ Ethernet power supply (POE, optional) and allow the
transmission of power and data through Ethernet cable.

Overview
7
PoE Swicth
3. Reset Button: When the device fails to function during incorrect operation or
accidental failure (e.g. forget IP address or password), or it is used in different
scenes, press down the button for above 5s after a delay of 30s from powering
on to restore the device to its factory default. The default user’s name is
“admin”, the default password is “admin” and the default IP address is
“192.168.1.88”.
4. Alarm Interface: Connect to alarm input and alarm output. When the device
receives an alarm from alarm output or Web motion detection, this interface
can send a signal to alarm output to realize real-time monitoring and overall
protection while triggering a remote alarm. The specific interfaces are
presented in the following figure.
IN
123 4 5
NC
COM
NO
GND Alarminput
Alarmoutput
1) The schematic diagram of alarm input connection is as follows:
switch
Alarm Input
Terminals
(IN,GND) Alarm
Input
Device
Power Supply of
Alarm Input Device
Schematic Diagram of Alarm Input (Normally Opened) Connection