ZKTeco C4DS Series User manual

Quick Start Guide
Model: C4DS Series
Version: 1.1
Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between
the actual product and the written information in this manual.
English

1
Important Notes
If you have any problems, please read this manual carefully or contact the
customer care.
1.
2.
Make sure that the entered Wi-Fi password is correct while adding a new
device.
3.
Please make sure that the device is near the router for a stable network
connection.
4.
Do not mount the camera before confirming a successful network
connection and smooth live video.
5.
Installing the device near a public road should be avoided. Frequent
waking up of the camera by people and cars causes more frequent alert
notifications and significantly quicker power consumption.
6.
The device can only connect to 2.4GHz Wi-Fi networks. If you have a
dual-band router with separate 2.4GHz and 5GHz networks, make sure that
your phone is connected to the 2.4GHz network.
Make sure that the solar panel is uncovered. Remove the dust or leaves on
the panel regularly if necessary.
7.
Make sure that the camera is connected to the weatherproof cover tightly
all the way.
8.
We couldn't guarantee the exact consistency between the actual product
and the written information in this manual due to the regular app and
product updates.
9.

2
Table of Contents
*Connecting the Device to Amazon Alexa or Google Assistant........................................8
Connecting the Device to ZSmart App.............................................................................................6
Recharging the Battery.........................................................................................11
Camera....................................................................................................................................................................8
Product Overview.....................................................................................................4
Installation.................................................................................................................8
Watching the Videos from Browser.......................................................................................................7
Product Features.... ...............................................................................................12
What's in the Box......................................................................................................3
Setup...........................................................................................................................6
Solar Panel..........................................................................................................................................................10

3
What's in the Box
Camera Mounting Plate Screw Kit (for
Mounting
Plate)
USB Charging Cable Thumb Screws * 6 Screw Kit (for
Solar Panel)
Solar Panel Mounting Bracket
Quick Start Guide
Model: C4DS S eries
Version: 1.1
Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between
the actual product and the written information in this manual.
English
Quick Start
Guide

4
Product Overview
Antenna
Thumb
Screws
Working
Status LED
LED Light
Motion
Sensor (PIR)
Microphone
Power
Status LED
Front

Reset ButtonPower Button
TF Card Slot
Speaker
Type-C
Charging Port
Working Status LED Description:
Slow Blinking Red
In Pairing Mode
Rapid Blinking Red
Network Connecting
Slow Blinking Blue
Camera Online
Charging Status LED Description:
Slow Red Solid Blue
Charging CompletedCharging
5
Bottom

6
Note: If the device doesn't display the above status, press and hold the
Reset Button for 5 seconds until you hear a sound prompt “Bugu”.
Open the silicon cover at the bottom of the camera.
1.
To power on the device, press and hold the Power Button for 5 seconds
until you hear a sound prompt and the Working Status LED blinks red
slowly, indicating that Pairing Mode is active.
2.
Step 2: Power on the Device
Open the app, tap the "+" button on the top right corner of the interface,
and then select the ”Add Device” option. Select the “Smart Camera”
option and then choose the corresponding model purchased.
1.
Select "Next" if you have completed the above steps on the interface.
Select the desired Wi-Fi and enter the correct password. Then tap the
"Next" button.
2.
Step 3: Add the Device to the App
Setup
Connecting the Device to ZSmart App
Step 1: Download the App and Register Your Account
Search for the ZSmart App in Apple App Store or Google Play Store and
download the App to your smartphone.
Open the ZSmart App and log in with your account. If you do not have an
account, create an account with your phone number or Email ID.

Show the QR code towards the device lens, and the camera will scan the
QR code. Once you hear a sound prompt “Bugu” and the Status LED blinks
red rapidly, tap the "I Heard a Prompt" button on your mobile, the App will
connect the device automatically.
3.
Note: Please hold the phone about 15 to 20 cm (6 to 8 inches) away
from the camera. You can slightly move your mobile device forward
and backward for better scanning.
Once the notification "Added successfully" appears on the mobile
app, you can change the device's name manually. Tap the "Done"
button to complete the process.
4.
Note: If you failed to connect your device to Wi-Fi, press and hold the
RESET Button for 5 seconds until you hear a sound prompt “Bugu”, then
repeat the above steps.
7
Watching the Videos from Browser
Visit , and then select the corresponding https://ipc-us.ismartlife.me
data server on the top right corner of the interface.
Select the relevant device to view the live videos.
1.
Use ZSmart App to scan the QR code to login into your account.
2.
3.

8
Installation
Installation Location: The device can be put on the wall. Choose a location
with a clear, unblocked field of view and with a good wireless signal to the
device. The recommended installation height is 2.4 to 3 m (8 to 10 ft).
Camera
Installation Steps:
After confirming a successful Wi-Fi connection and smooth live video, you can
select the required position to mount the device. The installation steps are as
follows:
Drill four holes in the wall according to the hole positions of the mounting
plate, and then insert the plastic anchor into the hole; anchors are
necessary for walls that are made of hard materials such as concrete, brick
or stucco.
1.
Fix the mounting plate onto the wall with four screws.
2.
*Connecting the Device to Amazon Alexa or
Google Assistant
Tap the EDIT Button in the upper right corner of the device interface after
successfully connecting the device to the ZSmart App. To link your ZSmart
Account to Amazon Alexa or Google Assistant, select the Amazon Alexa or
Google Assistant icon and follow the on-screen instructions.
Echo, show me <device name>.
Hey Google, show me <device name>.
Note:
After completing the setup, you can use the supported voice commands
that include:
Every time you change the name of a linked device, you must identify it
again to update the name.
1.
The voice control feature is optional, only the model C4DSA can
supported.
2.

9
Align the mounting plate with the grooves of the camera base, and tighten
the device by four thumb screws.
3.
Adjust the viewing angle by checking the live video in the mobile app. For
the best alarm detection range, the angle of the lens should be tilted down
at a 15° inclination.
4.
Detection Coverage
Motion Sensor
Downward 15°
8.2 ft.
Height
9.8 ft.
Height Motion Sensor
Downward 15°
Detection Coverage

10
Connect the solar panel to the camera with the Type-C charging cable.
4.
Bolt
Installation Location:
Solar Panel
Select a proper position where the panel can collect the most sunlight
throughout the year.
1.
Adjust it to the ideal angle (your local latitude + 5°) towards the sun.
2.
Installation Steps:
Drill three holes in the wall according to the hole positions of mounting
bracket, and then insert the plastic anchor into the holes. Anchors are
necessary for walls that are made of hard materials such as concrete, brick
or stucco. Fix the mounting bracket onto the wall with three screws.
1.
Tighten the solar panel to the mounting bracket by rotating clockwise.
2.
Adjust the angle of the solar panel so that it can receive as much sunlight
as possible.
3.
12

11
In addition to the power supply from solar panel, you can also use an additional
power adapter to charge the camera.
Use a universal power adapter with a DC 5V/2A output to charge the device.
While the device is charging, the red LED will illuminate. From 0% to 100%, the
charging duration is approximately 10 hours. In the App, you can see how much
battery life is left.
3
4
Recharging the Battery

Product Features
Sound
Image Quality
Screenshot
Fullscreen
Speak
Record
Main Interface
Battery Level: Check the remaining battery level and the charging status.
Sound: To mute or unmute the sound from the device.
Image Quality: To switch the image quality between HD and SD.
Fullscreen: Tap it to switch to the full screen.
Screenshot: Capture a picture of the photo album in the App.
Speak: Tap it, to talk to people in front of the device.
Record: Manually record a video to the photo album in the App.
Playback: Watch the recorded videos in the TF Card.
Gallery: Review the recorded photos while detecting the motion.
Theme Color: Change the UI theme to light mode or dark mode.
Night Mode: Select the night vision mode from Smart Mode, Infrared
Mode or Color Light Mode.
Siren: Tap it to activate the sound alarm.
Light: Tap it to turn on or off the Light LED.
12
Battery Level

More Setting
Basic Settings:
Flip Screen: Rotate the current monitoring image at 180 degrees.
Time Watermark: Choose whether the monitoring inter face
displays the real time watermark.
Talk Mode: To fit into the actual requirements, select the one-way
or two-way talk mode.
Detection Alarm Settings:
Human Body Filtering: Reduce false alerts with smart tech which
differentiates humans from other objects.
Messages: Check the specific logs of all the motion detection or video call.
Direction: Tap the buttons to rotate and set the camera's point of view.
Audible Alarm: Tap it to enable the alarm of light and sound, which will be
activated when someone passes at night.
*Cloud: This Video Cloud Storage service is needed to pay for the
monthly or annually subscription. You could check the video from cloud
storage with this App anytime, anywhere. The cloud storage only supports
recording the events video clips.
PIR: The PIR can be enabled or disabled, or adjusted the sensitivity level as
required.
Power Management Settings: Check the remaining battery level and the
power source, or set the threshold of the low battery alarm.
*Voice Control: To see live video from the Amazon Echo or Google Home
device, use Amazon Alexa or Google Assistant voice commands. This
feature is optional.
Offline Notification: It enables to receive the offline push message from
the camera.
Remove Device: Remember to REMOVE the device from the current
account when the owner of the camera changes.
13

Modelo: Serie C4DS
Versión: 1.1
Español
Guía Rápida
Debido a las actualizaciones periódicas de los sistemas y productos, ZKTeco no puede garantizar la
consistencia exacta entre el producto real y la información escrita en este manual.

1
Lea atentamente este manual o comuníquese con atención al cliente para
cualquier consulta.
1.
2.
Asegúrese de que la contraseña Wi-Fi ingresada sea correcta al agregar un
nuevo dispositivo.
3.
Para una conexión de red estable, asegúrese de que el dispositivo esté
colocado cerca del enrutador.
4.
No instale el dispositivo antes de confirmar una conexión de red exitosa y
un video en vivo fluido.
5.
Evite instalar el dispositivo en una calle muy transitada. El movimiento
frecuente de peatones y vehículos seguirá activando la cámara, lo que
provocará notificaciones de alerta más frecuentes y un consumo de
energía extremadamente rápido.
6.
Este dispositivo sólo trabaja con redes Wi-Fi de 2.4GHz. Si tiene un
enrutador doble banda con redes de 2.4 GHz y 5 GHz, asegúrese de que su
teléfono esté conectado a la de 2.4 GHz.
Asegúrese de que el panel solar esté descubierto. Retire periódicamente el
polvo o las hojas del panel si es necesario.
7.
Asegúrese de que la cámara esté conectada a la cubierta resistente a la
intemperie en todo momento.
8.
Debido a las actualizaciones periódicas de la aplicación y los productos, no
podemos garantizar la coherencia exacta entre el producto real y la
información escrita en este manual.
9.
Notas Importantes

2
Tabla de Contenidos
Panel Solar..........................................................................................................................................................10
Recargando la Batería...........................................................................................11
Cámara....................................................................................................................................................................8
*Conexión del Dispositivo con Amazon Alexa o Google Assistant..................................8
Revisar Grabaciones desde Navegador..............................................................................................7
Características del Producto ...............................................................................12
Contenido..................................................................................................................3
Conexión del Dispositivo con la App ZSmart................................................................................6
Descripción del Producto.......................................................................................4
Configuración...........................................................................................................6
Instalación.................................................................................................................8

3
Contenido
Cámara Kit de Tornillos
(para Placa
de Montaje)
Cable de Carga USB Tornillos de Cabeza
Moleteada * 6
Panel Solar Soporte de Montaje
Kit de Tornillos
(para Panel
Solar)
Guía Rápida
Modelo: Serie C4DS
Versión: 1.1
Español
Guía Rápida
Debido a las actualizaciones periódicas de los sistemas y productos, ZKTeco no puede garantizar la
consistencia exacta entre el producto real y la información escrita en este manual.
Placa de Montaje

4
Descripción del Producto
Antena
Sensor de
Movimimento
(PIR)
Micrófono
Lente
LED de Estado
de Carga
LED de
Estado de
Trabajo
Luz Blanca
Tornillos de
Cabeza
Moleteada
Parte Delantera

Rojo intermitente lentamente
En Modo de Emparejamiento
Rojo intermitente rápidamente
Conectando a la Red
Azul intermitente lentamente
Cámara en Línea
Descripción del LED de Estado de Carga:
Rojo Fijo Azul Fijo
Carga TerminadaRecargando
5
Botón de
Energía
Botón de
Reinicio
Ranura para
Tarjeta TF
Altavoz
Interfaz
de Energía
Descripción de LED de Estado de Trabajo:
Parte de abajo