ZKTeco BOL1219-A User manual

User Manual
Automatic Bollard
Applicable Model: BOL1219-A
Version: 1.0
Date: 11/2018

1. Automatic Bollard Composition....................................................................................................................1
2. Control Cabinet ............................................................................................................................................2
3. Installation and Usage Procedures..............................................................................................................4
4. Precautions...................................................................................................................................................6
5. Troubleshooting............................................................................................................................................7

Automatic integrated hydraulic lifting column
Urban
pipeline Top view
Perspective
view
220 V pump
power cable
Well drain pipe
directed toward
the sewer
Sinking pump with
a floating ball
Five-core lifting column power
cable with a 1.5 mm2sectional area
Groove 1130 mm deep,
level with the ground
Bed course 200 mm thick
Drain pipe Three-way pipe connected to the drain pipe
Side view
Drain water to the sewer or river as permitted by the geologic conditions; otherwise, use a pump for drainage.

External Internal
Rise
Stop
Fall
Public
terminal
①

1. The total road length is 8000 mm.
2. Dig a groove measuring 8000 mm x 1000 mm x 13000 mm
3. After a groove is dug, harden the foundation 200 mm high
when the drain pipe is deployed. Bury the 60# PVC pipe into the
hardened layer 200 mm high.
4. After the hardened layer is dry, place the lifting column at the
center marked with 1500.
5. Check whether the horizontal position is reached by using a
level gauge.
②
③
④

⑤
⑥
⑦