ZL electronics Technology 900G User manual

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
1
900G
900G
900G
900G
Vehicle
Vehicle
Vehicle
Vehicle GPS
GPS
GPS
GPS Tracker
Tracker
Tracker
Tracker User
User
User
User Manual
Manual
Manual
Manual
2008-03-21

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
2
Table
Table
Table
Table of
of
of
of Contents
Contents
Contents
Contents
1 . W orking D irections.................. ...................................... ................................. ....... .................. ….. 3
2 . GPS Tracker Installation................................................... ...................................... ...... ....... ......... 3
2. 1. Product Parts List ................................................ ..................................... ................. .... ..... .3
2. 2. Precaution before Installation ........................... ..................................... ........................ ......4
2.3 . Installation............................................................ ..................................... ....................... ....5
2.4 . Wiring Description............................................ ..................................... ............................ ...6
3 . Operating Instructions ................................... ....... ........ ..................................... ........... . .......... ... . 7
4 . SMS Tracking by Mobile ................................... ........................................ ........................... ...... 1 0
4. 1. Position Report Function ....................... ............................................ .......................... ...... 1 0
4. 2. Tracking Function ....................... ........................................................................ ......... ...... 1 1
4. 3. Stop tracking function ……………… .. …………………………… .. … . …… . .................... ...... 1 1
5 . GPRS Tracking by computer ....................................................................................................1 2
5.1 . Set APN .................. ........................................... . ..................................... ..................... ...... 1 2
5.1 . Set IP and Port ............. ................................. .... ................................... .................... . .. ....... 1 2
6. T ake Photo function ............................. .... .................................................... .................... . .. ....... 1 3
6.1. Take photos............................. .... ........................................................ .................... . .. ....... 1 3
6.2. Take photos by press SOS button. ............................. .... .................... .................... . .. ....... 1 3
6.3. Set the time interval to take photos. .............................. .... ......................... ................ ....... 1 3

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
3
1
1
1
1 .
.
.
. Working
Working
Working
Working Directions
Directions
Directions
Directions
Thank you for your purchase of 900G Vehicle GPS Tracker.
In
order to realize the full functions of
this product, please read this manual carefully before starting to use the product.
1. This product can only be maintained and repaired by qualified professional service
personnel.
If
you detach this product for maintenance or repair, your warranty will be
invalidated.
2. When connecting the other devices, read carefully their instruction manuals, so as to carry
out correct installation; do not connect incompatible device.
3. Please use genuine original parts and qualified batteries and peripheral equipments, so as
to avoid damage to this product.
4. As this product is a high-tech product, please read carefully this manual before starting to
use the product, so as to avoid inappropriate operation.
5. Drivers should not operate this product while driving a vehicle, thereby, affecting safe
driving.
6. This product can work properly only when GSM communication is in good condition.
7. Please reduce electromagnetic wave interference to the product; and use it properly.
8. GPS communication is liable to be affected by environmental shielding; may fail to carry out
positioning during certain circumstances.
It
will resume the positioning function as soon as it
leaves the shielding environment. This is normal. Please do not worry when encountering
such problem.
9. Each signal sent out from the system will be confirmed for successful transmission in the
base station of the mobile operator. However, if system stoppage occurs or if the mobile
telephone is preset to a switch off state by the customer, it cannot ensure successful
transmission.
10. For safety reason, do not tell the other people your 900G mobile number, without taking
precautions. Otherwise, your privacy may be compromised along with other safety problem.

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
4
2
2
2
2 .
.
.
. Wiring
Wiring
Wiring
Wiring Installation
Installation
Installation
Installation
2.
2.
2.
2.
1.
1.
1.
1.
Product
Product
Product
Product Parts
Parts
Parts
Parts List
List
List
List
GPS
GPS
GPS
GPS Tracker
Tracker
Tracker
Tracker Unit
Unit
Unit
Unit
GPS
GPS
GPS
GPS Antenna
Antenna
Antenna
Antenna
GSM
GSM
GSM
GSM Antenna
Antenna
Antenna
Antenna
Car
Car
Car
Car Charger
Charger
Charger
Charger
Lighter
Lighter
Lighter
Lighter Socket
Socket
Socket
Socket
2.
2.
2.
2.
2.
2.
2.
2.
Precaution
Precaution
Precaution
Precaution before
before
before
before Installation
Installation
Installation
Installation

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
5
1 Check if all the parts are included.
2
Prepare a SIM card for GSM communication. Use some other mobile phone to confirm that
the
PIN
code has not been set and that it can dial out and receive telephone calls and SMS
without problem .
3
Before install the SIM card; make sure to cut off power from the GPS Tracker unit. The
correct installation method is to push the tray completely into the GPS Tracker unit, until you
feel it is hooked by something .
4 Find a suitable place inside the car for installing the unit.
5
Check if all the wiring has been connected correctly; then connect the GPS Tracker unit to
the power source.
2.3
2.3
2.3
2.3
.
.
.
.
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
2.3.1
2.3.1
2.3.1
2.3.1 Step
Step
Step
Step 1
1
1
1
:
:
:
:
Install
Install
Install
Install SIM
SIM
SIM
SIM Card
Card
Card
Card
1Using a speculate object to poke the small button of the SIM card seat, and then it will
pop-up a small drawer .
2Put the SIM card in the drawer, and put back the drawer, as direction shown in the picture.
3Make sure to turn off the power before install the SIM card.
4Make sure to deactivate the PIN code, so that the SIM card can operate without
PIN
protection.
5Before install the SIM card to the GPS Tracker, please use a mobile phone to make sure
the SIM card can make & receive phone calls without problem.
6Before install the SIM card to the GPS Tracker, please use a mobile phone to empty the
SMS storage of the SIM card.
2.3.2
2.3.2
2.3.2
2.3.2 Step
Step
Step
Step 2
2
2
2
:
:
:
:
Connect
Connect
Connect
Connect GSM
GSM
GSM
GSM Antenna
Antenna
Antenna
Antenna
1
Connect the GSM Antenna to the unit.
2Fasten the connection by turning the screw in the bottom.
3
Please do not swing round the antenna itself.
2.3.3
2.3.3
2.3.3
2.3.3 Step
Step
Step
Step 3
3
3
3
:
:
:
:
Connect
Connect
Connect
Connect GPS
GPS
GPS
GPS Antenna
Antenna
Antenna
Antenna

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
6
1
GPS antenna is used to receive satellite signals in the sky.
It
should be positioned at a place
where it will have an unobstructed view of the sky. The ideal location is top of the dashboard or
close to the rear window of the car.
2
GPS antenna can pick up signals through glass and plastic, but will not "see the sky"
through metal or other conductive surfaces. To avoid distractions of GPS signal, make sure
the antenna is not covered or shielded by any object containing metal, such as the metallic
windshield.
3
If
your car is with metallic windshield please cut a hole on the windshield above the place
where you put the GPS antenna, so that the antenna can receive the GPS signals.
2.3.4
2.3.4
2.3.4
2.3.4 Step
Step
Step
Step 4:
4:
4:
4: Connect
Connect
Connect
Connect power
power
power
power charging
charging
charging
charging
900G connects to the 6pin wires .
2.4.
2.4.
2.4.
2.4. Wiring
Wiring
Wiring
Wiring Description
Description
Description
Description
4
4
4
4 pins
pins
pins
pins connector
connector
connector
connector
Pin
Pin
Pin
Pin Color
Color
Color
Color function
function
function
function
1 Red power switch
2 Red power switch
3 Yellow Connect to door sensor
4 Green U ndefined input.
for example you can use it to detect the signal of car alarm

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
7
6
6
6
6 pins
pins
pins
pins connector
connector
connector
connector
Pin
Pin
Pin
Pin Color
Color
Color
Color function
function
function
function
1 Red DC in
I
nput voltage: 8-40V
Suggestion: 12V
2 Black GND
3 Brown O utput , starter kill relay you can use it to cut the electricity or oil of the car
4 White SOS button
5 Green O utput , starter kill relay you can use it to cut the electricity or oil of the car
6 Blue ACC signal detect ing
According to the relay parameter to make sure to following requirement:
T he input voltage of relay must be suit ed to the car battery
3
3
3
3 .
.
.
. Operating
Operating
Operating
Operating Instructions
Instructions
Instructions
Instructions
SMS protocol of 900G , the default password of 900G is 000000
SMS
SMS
SMS
SMS Instruction
Instruction
Instruction
Instruction Format
Format
Format
Format R
R
R
R emark
emark
emark
emark
1 Request one position A ******, 000 000: command code
****** : password, default 000000
2 Modify user password A ******, 001 ,###### 001: command code
****** : old password , default 000000
###### : new password
3 Set a preset phone
number for SOS button
or monitor ing number.
A ******, 002 , 1, Tel
Number
002 : command code
****** : password, default 000000
1 : S et SOS number
Tel Number: Preset Tel . number
(Tel Number must < 20 digits )

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
8
When this button is
pressed,
900G will send the SOS
and position message to
the preset number.
A ******, 002 , 2, Tel
Number
002 : command code
****** : password, default 000000
2 : S et monitoring number
Tel Number: Preset Tel . number
(Tel Number must < 20 digits )
4 Set the time inter v al of
position refresh to SOS
number,this command is
effective just in SMS
work mode.
A ******, 003 ,
XXX
003: command code
****** : password, default 000000
XXX : (3 digital)
XXX =000,stop
XXX = 00 1 – 999 time internal (unit: min)
5 Set low power alarm
When the voltage is
lower than the preset
value, tracker will send
one lower power alarm
SMS to the control
number.
Otherwise,there
Otherwise,there
Otherwise,there
Otherwise,there is
is
is
is not
not
not
not
this
this
this
this function
function
function
function in
in
in
in vehicle
vehicle
vehicle
vehicle
tracker
tracker
tracker
tracker
A******, 004
,X
004: command code
****** : password, default 000000
X : voltage preset value
X=0, close (default )
X =1, <3. 5 V send SMS alarm
X =2, <3. 6 V send SMS alarm
X =3, <3. 7 V send SMS alarm
X =4, <3. 8 V send SMS alarm
X =5, <3. 9 V send SMS alarm
6 Set over speed alarm
When the 900G speed
higher than the preset
value, 900G will send
one over speed alarm
SMS to the control
number.
A ******, 005
,XX
005: command code
****** : password, default 000000
XX : the speed preset value
XX = 00 , close
01 ≤ XX ≤ 99 (unit: XX Km /h )
7 G PRS Status, To
check GPRS Status
A******, 502 502: command code
****** : password, default 000000
8 Get IMEI A******, 505 505: command code
****** : password, default 000000
9 Set GPRS internal of
position refresh
A******, 506 ,00030 506: command code
****** : password, default 000000
00030 : Such as 30 seconds interval is 00030

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
9
10 C heck GPRS inter v al
of position refresh
A******, 507 507: command code
****** : password, default 000000
11 Inquire GPRS
parameter
R eturn
I
ncluding IP,
Port, APN
A ******, 006 006: command code
****** : password, default 000000
12 C ontrol the output A******, 007 ,P,F 007: command code
****** : password, default 000000
P: the position of the output
P =1 output 1
P =2 output 2
F: the control signal
F =1 give the relay the c urrent to drive it (cut
off the car power).
F =0 cut off the current of the relay
( comeback the normal ).
13 T ime zone setting A****** , 008 ,+ 0 8 008: command code
****** : password, default 000000
+08: S et the local time zone, the default
value is +08
14 Inquire the system
parameter .
I
ncluding the software
version, password,
interval, speed limit,
area limit,
I
/O state ,
GPS state , SOS
number, control number,
etc
A******, 009 009: command code
****** : password, default 000000
15 GPRS switch A****** , 0 10 ,
X
010: command code
****** : password, default 000000
X: GPRS function
=0 GPRS OFF
=1 TCP ON and updata in time interval strictly
=2 TCP ON and updata in factory mode.
=3 TCP ON and updata in save mode.

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
10
16 SET APN A****** , 0 11 , APN,
username ,password
011: command code
****** : password, default 000000
APN: GPRS use this gateway to connect
internet.
U sername: APN Username
P assword: APN Password
T he default APN is CMNET
17 Set the center IP and
Port
S et server parameter
A ****** , 012 ,IP:Port 012: command code
****** : password, default 000000
IP: Platform server ip
Port: Platform server port
18 LED Light Switch A******, 666 , X 666: command code
****** : password, default 000000
X: LED Light Switch
X =0 LED Light OFF
X =1 LED Light ON
19 Re set to factory settings A******, 888 888: command code
****** : password, default 000000
20 Restart Tracker A******, 999 999: command code
****** : password, default 000000
4
4
4
4 .
.
.
. SMS
SMS
SMS
SMS Tracking
Tracking
Tracking
Tracking by
by
by
by Mobile
Mobile
Mobile
Mobile
4.
4.
4.
4.
1.
1.
1.
1.
Position
Position
Position
Position Report
Report
Report
Report Function
Function
Function
Function
4.1.1.
4.1.1.
4.1.1.
4.1.1. Get
Get
Get
Get position
position
position
position from
from
from
from vehicle
vehicle
vehicle
vehicle
-
-
-
-
way
way
way
way 1:
1:
1:
1:
No matter where you are, when you want to know the position of your vehicle
Step1
Step1
Step1
Step1
S end a SMS message or make a telephone call to the 900G.
Step
Step
Step
Step 2
2
2
2
vehicle will report its location back to you by SMS, which including the position
information
Edit a message as following format, and then send it to 900G:

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
11
Command
Command
Command
Command Remark
Remark
Remark
Remark
Send
Send
Send
Send Format:
Format:
Format:
Format: A +Password+,+000 Get position command code is:
000
For
For
For
For Example
Example
Example
Example
Send
Send
Send
Send message
message
message
message
:
:
:
:
A000000, 000 000: command code
000000: password, default
000000
Back
Back
Back
Back
information
information
information
information
:
:
:
:
Lat:2232.6022N, Lon:11402.2969E T his mean your position is on
North Latitude 22 degree 32.2232
cent and East Longitude 114
degree 2.2969 cent
4.1.2.
4.1.2.
4.1.2.
4.1.2. Get
Get
Get
Get position
position
position
position from
from
from
from vehicle
vehicle
vehicle
vehicle
-
-
-
-
way
way
way
way 2:
2:
2:
2:
Apply for one position service by another way: you need pre- storage the phone number in SIM
card:
Step1
Step1
Step1
Step1
Make a cell phone call to 900G
Step
Step
Step
Step 2
2
2
2
After listening the ring of 900G , it will hold off after two rings .
Step
Step
Step
Step 3
3
3
3
Then, after 10 second, the cell phone will receive the Position SMS. (Its means is
900G will send Position Data every 5 minute.)
4.
4.
4.
4.
2.
2.
2.
2.
Tracking
Tracking
Tracking
Tracking Function
Function
Function
Function
Tracking report function can be turned on or off according to the requirements of the user.
Tracking function will continually report vehicle position until it get stop command .In this tracking
mode , 900G will send one position message at a preset time interval.
Step1
Step1
Step1
Step1 .
.
.
.Edit a message as following format, then send it to 900G
Command
Command
Command
Command Remark
Remark
Remark
Remark
Send
Send
Send
Send Format:
Format:
Format:
Format: A +Password+,+00 3 ,+XXX Note:
XXX
, if XXX=000 it is
STOP tracking
Unit: preset minute interval
Command code : 003
F
F
F
F or
or
or
or example:
example:
example:
example: A 000000, 00 3 ,00 3 003: command code
000000: password, default
000000
003: 3 minute interval
It
means is 900G will send
Position Data every 3 minute.

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
12
Step2.
Step2.
Step2.
Step2. 900G will send back one SMS-----Set Time OK.
This SMS means that 900G is in tracking mode now and preset time interval is 3 minutes.
Step3.
Step3.
Step3.
Step3. 900G will send back position SMS at preset time interval .
In
this example, the SMS will send back at preset tim e interval: 3 minute
4.
4.
4.
4.
3.
3.
3.
3.
Stop
Stop
Stop
Stop tracking
tracking
tracking
tracking function.
function.
function.
function.
This function is used to turn off tracking report function . Edit a message as following format, and
then send it to 900G :
Command
Command
Command
Command Remark
Remark
Remark
Remark
Command
Command
Command
Command format:
format:
format:
format: A +passwaord+,+00 3 +,+000
For
For
For
For example:
example:
example:
example: A 000000, 00 3 ,000
003: command code
000000: password, default
000: 0 minute interval, mean
stop back
5.
5.
5.
5. GPRS
GPRS
GPRS
GPRS Tracking
Tracking
Tracking
Tracking by
by
by
by Computer
Computer
Computer
Computer
The default mode is GPRS when powering on the unit. The default setting is ours; you need to
send the following SMS to Set APN and
IP,
Port. (If you use our server, you only need to set APN) .
5.1.Set
5.1.Set
5.1.Set
5.1.Set APN
APN
APN
APN
Send the SMS to the tracker as following format
Command
Command
Command
Command Remark
Remark
Remark
Remark
Command
Command
Command
Command format:
format:
format:
format: A +Password+,+011, + APN
F
F
F
F or
or
or
or example:
example:
example:
example: A 000000,0 11 , CMNET 011 : Command code
000000: password, default
000000
CMNET: APN, is gateway to
connect internet, Each country is
different ,
5.2.Set
5.2.Set
5.2.Set
5.2.Set IP
IP
IP
IP and
and
and
and Port
Port
Port
Port
Send the SMS to the tracker as following format :
Command
Command
Command
Command Remark
Remark
Remark
Remark
Command
Command
Command
Command format:
format:
format:
format: A +Password+,+01 2 , +IP:Port

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
13
F
F
F
F or
or
or
or example:
example:
example:
example: A 000000, 01 2 , 119.147.24.211 : 8886 012 : Command code
000000: password, default
000000
119.147.24.211
Platform server IP
8886: Platform server software
Port
W hen the 900G connect to the monitor system, the power LED flash by 1 S. Then you can login
in the tracking server to manage your car.
6.
6.
6.
6. T
T
T
T ake
ake
ake
ake Photo
Photo
Photo
Photo function
function
function
function (
(
(
( only
only
only
only for
for
for
for 900G/900C):
900G/900C):
900G/900C):
900G/900C):
Connect the Camera to 900G,
You can send a command to take photographs; t he car terminal will shoot pictures and spread to
Center. After that, pictures will display on the operation platform.
6.1.
6.1.
6.1.
6.1. Take
Take
Take
Take photos
photos
photos
photos on
on
on
on software.
software.
software.
software.
6.2.
6.2.
6.2.
6.2. Take
Take
Take
Take photos
photos
photos
photos by
by
by
by press
press
press
press SOS
SOS
SOS
SOS button.
button.
button.
button.
6.3.
6.3.
6.3.
6.3. Send
Send
Send
Send SMS
SMS
SMS
SMS command
command
command
command to
to
to
to set
set
set
set the
the
the
the time
time
time
time interval
interval
interval
interval to
to
to
to take
take
take
take photos.
photos.
photos.
photos.
Such
Such
Such
Such as
as
as
as 30
30
30
30 minutes
minutes
minutes
minutes to
to
to
to take
take
take
take a
a
a
a photo
photo
photo
photo and
and
and
and send
send
send
send back
back
back
back to
to
to
to software.
software.
software.
software.

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
14
7.
7.
7.
7. PC
PC
PC
PC setting
setting
setting
setting (
(
(
( only
only
only
only for
for
for
for 900G):
900G):
900G):
900G):
You can read and set the 900G by computer using the USB setting cable.
Step1 : download the "ComTool.exe" from the 900S. And run it
Step2 : connect the setting cable to PC and install the drive accurately.
Step3 : connect the 900G to PC , and operate 900G, then click the "connect".
Step4 : you can use the PC setting function.
8.
8.
8.
8. SD
SD
SD
SD function
function
function
function (
(
(
( only
only
only
only for
for
for
for 900G):
900G):
900G):
900G):
There is 2G SD card in 900G .
It
can store the driving data for several months .
You can inquire SD data using the setting cable.

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
15
9.
9.
9.
9. RFID
RFID
RFID
RFID function
function
function
function (
(
(
( only
only
only
only for
for
for
for 900G):
900G):
900G):
900G):
900G has a optional accessory RFID reader.
You can manage your drivers using this accessory .

ZL
ZL
ZL
ZL ELECTRONICS
ELECTRONICS
ELECTRONICS
ELECTRONICS TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY (HK)
(HK)
(HK)
(HK) CO.,
CO.,
CO.,
CO., LIMITED
LIMITED
LIMITED
LIMITED
16
10.
10.
10.
10. Print
Print
Print
Print function(only
function(only
function(only
function(only for
for
for
for 900G)
900G)
900G)
900G)
900G has a optional accessory printer.
When you press the SOS button
,You
can print some information expediently.
Table of contents
Other ZL electronics Technology GPS manuals