Zline RTBBR30 Assembly instructions

Rangetops
Installation Guide
and Users Manual

WARNING: This product can expose you to chemicals including
nickel, which is known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov.
ZLINE is fueled by a passion for innovation; A relentless pursuit of bringing
the highest end luxury designs and professional features into everyone's
homes. Because we continually strive to improve our products, we may
change specifications and designs without prior notice.

Enjoy the versatility and high performance cooking power of ZLINE’s
rangetops.
No matter your kitchen needs, this collection offers four to seven burners
in various finishes, sizes, and BTUs. Enjoy precise heat control through
imported Italian burners combined with durable cast iron grills, both
known for their even heat distribution and longevity.
Made by hand and innovatively designed - allowing exploration for the
love of food.

COVERAGE
ZLINE Kitchen and Bath range products will be warrantied for one year from the
original purchase date for the original purchaser of the product. This warranty covers
all parts and labor for necessary repairs if any part of the product proves to be
defective in materials or workmanship. The product must be deemed serviceable via
troubleshooting with the ZLINE Kitchen and Bath service team. All service on ZLINE
Kitchen and Bath range products under the above warranty must be performed by
ZLINE approved and certified service, unless otherwise specified by ZLINE Kitchen
and Bath. Service will be provided during normal business hours.
TERMS
This warranty applies only to the original purchaser of a range product installed for
normal residential use. This is defined as a single-family, residential dwelling in a
non-commercial setting. Commercial settings include but are not limited to: schools,
churches, hotels, restaurants, vacation rentals such as Airbnb, day care centers,
private clubs, fire stations, common areas in multi-family dwellings, nursing homes,
food service locations, and institutional food service locations such as hospitals or
correction facilities. This warranty is non-transferable and will not be extended based
on the date of installation. The warranty applies only to products installed in the
continental United States and the District of Columbia.
Failure to secure certified warranty service per these terms will result in a forfeiture
of the remaining warranty. Out of pocket payments will not be reimbursed unless
prior approval is received from ZLINE Kitchen and Bath and/or our service contract
partner. Unapproved out of pocket payments for service will not be reimbursed. All
warranty procedures must be followed to maintain warranty coverage.
Warranty shall not apply and ZLINE Kitchen and Bath is not responsible for damage
resulting from negligence, improper maintenance, misuse, abuse, alteration of or
tampering with the appliance, accident, natural disaster, improper electric supply,
flare-up fires, unauthorized service or repair, improper installation, or installation not
in accordance with the instructions contained in the manual, or the local codes.

WHAT IS NOT COVERED
1. Installation or start-up, damages or problems caused by improper installation or
use.
2. Improper liquid propane conversion or damage related to improper liquid
propane conversion.
3. Cook top burner flame adjustments or related complaints.
4. Service by an unauthorized service providers or damage related to unauthorized
service or unauthorized parts.
5. Installation in any commercial or non-residential application.
6. Corrections regarding normal adjustments or settings, or local gas supply issues
resulting in low gas pressure or other issues.
7. Removal or re-installation cost.
8. Aesthetic damage, scratches, or natural wear caused by normal use.
9. Second-hand, open box products or products purchased from an unauthorized
retailer.
10. Service for gas pressure issues related to installation at high altitudes. A high-
altitude pressure regulator must be sourced by the customer.
NOTE: In the event that service is dispatched, and it is discovered that the reported
issue is not covered under warranty based on the disclaimers above, the customer
will be responsible for all service fees. Failure to pay these fees will result in the
forfeiture of remaining warranty coverage.

CONTENTS
IMPORTANT SAFETY INSTRUCTIONS 1
WARRANTY AND SERVICE 3
PRODUCT DIMENSIONS 3
BEFORE INSTALLATION 5
INSTALLATION REQUIREMENTS 7
POWER RATING & ELECTRICAL CONNECTION 8
WIRING SCHEMATICS 9
GAS CONNECTION 11
GAS CONVERSION PROCEDURE 15
INSTALLATION CHECKLIST 18
FINAL PREPARATION 18
Installation Guide

CONTENTS
Users Manual
ROOM VENTILATION 20
COOKTOP COOKING 20
MAINTAINING YOUR RANGE 23
TROUBLESHOOTING 24

We want to thank you for choosing one of our beautiful, professional ranges. We
know that you have many brands to choose from and we are thrilled that you have
decided to place one of our products in your home.
Our appliances are designed according to the strictest safety and performance
standards for the North American market. We follow the most advanced
manufacturing process. Each appliance leaves the factory after thorough quality
inspection and testing. Our distributors and our service partners are ready to answer
any questions you may have regarding installation of your ZLINE product.
This manual will help you learn to use the product in the safest, most efficient manner,
and care for it so that it may give you the highest satisfaction for years to come.
This manual also includes directions for the professional installer that will install the
product in your home. We recommend professional installation by trained personnel.
Please keep this manual for future use.
Thank You

The rating tag shows the model and serial number of your range. The tag is located
near the power cord.
Important Appliance Information
Dealer
Model
Date Installed
Installer
Location of Appliance Tags

1
The manufacturer will not be responsible for any damage to property or to persons
caused by incorrect installation, improper use of the appliance, or failure to heed the
warnings listed.
The manufacturer reserves the right to make changes to its products when considered
necessary and useful, without affecting the essential safety and operating
characteristics.
This appliance has been designed for non-professional, domestic use only.
Before beginning installation, please read these instructions completely and carefully.
Please observe all local, state and national codes and ordinances. Please ensure
the range is properly grounded. The installer should leave these instructions with the
consumer who should retain for local inspectors use and for future reference. The
plug should always be accessible. Installation must conform with local codes or in
the absence of codes, the National Fuel Gas Code NSIZ223. 1/NFPA54. Electrical
installation must be in accordance with the National electrical code ANSI/NPA70-
latest edition and/or local codes. In Massachusetts: Installation must be performed
by a “Massachusetts” licensed plumber or gasfitter. A “T” handle type manual
gas valve must be installed in the gas line connected to this appliance. In Canada:
Installation must be in accordance with the current CAN/CGA-fe 149.1 National
gas installation code or CAN/CGA-B 149.2, Propane installation code and/or
local codes. Electrical installation must be in accordance with the current CSA C22.1
Canadian electrical codes Part 1 and/or local codes.
The installation of appliance designed for manufactured (mobile) home installation
must conform with the Manufactured Home Construction and Safety Standard,Title
24CFR,Part 3280 [formerly the Federal Standard for Mobile Home Construction and
Safety,Title 24,HUD(Part280)] or with local codes where applicable.
Installation of any gas-fired equipment should be made by a licensed plumber. A
manual gas shut-off valve must be installed in the gas supply line ahead of the oven
in the gas flow for safety and ease of service.
Please read and follow these important instructions for the safety of your home and
the people living in it.
An air curtain or other overhead range/cooktop hood which
operates by blowing downward airflow onto the range, shall not be
used/installed in conjunction with this gas range.
WARNING
Important Safety Instructions

2
Please ensure that the altitude of your home is conducive for the use of gas cooking
products. If the product is installed at higher altitudes above sea level, you may
experience issues with gas pressure that will affect product performance. Please
consult your local gas company for recommendations before purchasing or installing.
Do not store or use gasoline or any other flammable substances in the vicinity of this
or any other appliance.
NEVER use this appliance as space heater to heat or warm the room. Doing so may
result in carbon monoxide poisoning and overheating of the oven.
NEVER cover any slots, holes, or passages in the oven bottom or cover an entire
rack with materials such as aluminum foil. Doing so blocks air flow through the oven
and may cause carbon monoxide poisoning. Aluminum foil linings may also trap
heat,causing a fire hazard.
What To Do If You Smell Gas
DO NOT light any appliance.
DO NOT touch any electrical switch.
DO NOT use any phone in your building.
DO NOT use any aerosol cans or combustibles.
Immediately call your gas supplier from a neighbor’s phone, follow the gas supplier’s
instructions.
In the case you cannot reach the gas supplier, call the fire department.
Installation and service must be conducted by a qualified installer, service agency, or
the gas supplier.
If the information in this manual is not followed exactly, a fire or explo-
sion may result causing property damage, personal injury, or death.
Never use this appliance as a space heater to heat or warm the
room. Doing so may result in carbon monoxide poisoning and
overheating of the oven.
WARNING
WARNING
Important Safety Instructions

3
Warranty and Service
All range products carry a one year parts warranty and includes service, if required. If
you experience any issues with your product, contact us directly at 1-614-777-5004.
The ZLINE customer service team is ready to work with you on resolving your issues and
assessing if further service is needed. Service should only be conducted by an industry
professional with PRIOR approval from the ZLINE customer service team.
Replacement Parts
Only authorized replacement parts may be used in performing service on this
appliance.
Replacement parts are available from ZLINE. Call 1-614-777-5004.
8“
36“
27.5“
8“
30“
27.5“
8“
48“
27.5“
Warranty and Service
Product Dimensions

4
Cut outs:
27"7/16(695)
23"15/16(608)
2"3/4 (70)
1"15/15 (48.5)
47"7/8 (1215)
1"5/16 (33.5)
5"3/8 (137
1"3/8 (35)
3"(76.5)
1"1/4 (32)
1 ”
3
/
8
5 ”
3
/
8
1 ”
1
/
4
7 ”
7
/
8
27 ”
7
/
16
23 ”
15/
16
1 ”
5/
16
47 ”
7
/
8
3”
2 ”
3
/
4
2”
27"7/16(695)
23"15/16(608)
2"3/4 (70)
1"15/15 (48.5)
47"7/8 (1215)
1"5/16 (33.5)
5"3/8 (137
1"3/8 (35)
3"(76.5)
1"1/4 (32)
1 ”
3
/
8
5 ”
3
/
8
1 ”
1
/
4
7 ”
7
/
8
27 ”
7
/
16
23 ”
15/
16
1 ”
5/
16
47 ”
7
/
8
3”
2 ”
3
/
4
2”
27"7/16(695)
23"15/16(608)
2"3/4 (70)
1"15/15 (48.5)
47"7/8 (1215)
1"5/16 (33.5)
5"3/8 (137
1"3/8 (35)
3"(76.5)
1"1/4 (32)
1 ”
3
/
8
5 ”
3
/
8
1 ”
1
/
4
7 ”
7
/
8
27 ”
7
/
16
23 ”
15/
16
1 ”
5/
16
47 ”
7
/
8
3”
2 ”
3
/
4
2”
Product Dimensions

5
This appliance shall only be installed by an authorized professional.
The appliance shall be installed in accordance with the standards of the country
where it will be installed. The installation of this appliance must conform to local
codes and ordinances. In the absence of local codes installation must conform to
American National Standards, National fuel Gas code ANSI Z223.1-Latest edition/
NFPA 54 or B 149.1.
The appliance, when installed, must be electrically grounded in accordance with
local codes or, in the absence of local codes, with the National Electrical code,
ANSI/NFPA 70.
If local codes permit, a flexible metal appliance connections with the new AGA or
CGA certified design, max 5 feet (1.5m) long, 34˝m is recommended for connecting
this appliance to the gas supply line. DO NOT bend or damage the flexible
connector when moving the appliance.
This appliance must be used with the pressure regulator provided. The regulator must
be properly installed in order to be accessible when the appliance is installed in
its final location. The pressure regulator must be set for the type of gas to be used.
The pressure regulator has 34˝ female pipe thread. The appropriate fitting must be
determined based on the size of your gas supply line, the flexible metal connector
and the shut-off valve.
The appliance must be isolated from the gas supply piping system by closing its
individual manual shut-off valve during any pressure testing of the gas supply piping
system at test pressures equal to or less than 34 PSI(13,8w.cpr 3,5kPA).
All opening holes in the wall and floor, back and under the appliance shall be sealed
before installation of the appliance.
A manual valve shall be installed in an accessible location in the gas line external to
the appliance for the purpose of turning on and shutting off the gas to the appliance.
Before Installation
Do not use aerosol sprays in the vicinity of this appliance while it is hot.
WARNING

6
Room Ventilation
An exhaust fan may be used with the appliance; in each case it shall be installed
in conformity with the appropriate national and local standards. Exhaust hood
operation may affect other vented appliances; in each case it shall be installed in
conformity with the appropriate national and local standards.
Type of Gas
This appliance is shipped from the factory for use with natural gas. For use with
propane LP gas, please follow the conversion procedure described on pg. 18. A step
by step conversion procedure is also included with each set of LP gas nozzles.
Gas Pressure
The maximum inlet gas supply pressure incoming to the gas appliance pressure
regulator is 34PSI (13,8w. cpr 3,5kPA).
The minimum gas supply pressure for checking the regulator setting shall be at least
1˝ w.c (249 Pa) above the inlet specified manifold pressure to the appliance (This
operating pressure is 4˝ w.c. (1.00kPa) for Natural gas and 11˝ w.c. (2.75 kPa) for
LP gas.
Before Installation
Gas cooktop requires 1”- 6” side wall spacing above the counter height for
proper combustion. Please review specific model installation instructions for
required dimensions. 30 inches between the cooktop and bottom of the cabinet
above. 0.25 inches for sides below countertop height.
NOTE: Please consult your local building codes for variations with installation.

7
Installing the range top
Place the range top in the appropriate-sized cabinet base. Review cutout sizes on
page 4. The range top can sit in the cabinet with or without glue.
Gas
An agency-approved, properly-sized manual shut-off valve should be installed no
higher than 3” above the floor and no less than 2” and no more than 8” from the
right side (facing product).
To connect gas between shut-off valve and regulator, use agency-approved,
properly sized flexible or rigid pipe. Check all local code requirements.
Installation Adjacent to Kitchen Cabinets
For the best look, the worktop should be level with the cabinet countertop.
Installation Requirements

8
A properly grounded and horizontally-mounted electrical receptacle type NEMA 14-
50R should be installed no higher than 3” above the floor, no less than 2” and not
more than 8” from the left side (facing product); refer to electrical connection section.
The appliance shall be connected to a single phase electric line rated at 110-120Vac
and 60Hz frequency. The true voltage in most homes is usually between these values.
Electric Power Rating
110/120 Vac: 12A Max
Electrical Grounding
Our gas oven is equipped with a three-prong plug for your protection against shock
hazard and should be plugged directly into a properly grounded receptacle. Do not
cut or remove the prong from this plug.
Power Rating & Electrical Connection
Disconnect electrical power at the circuit breaker box or fuse box
before installing the appliance. Provide appropriate ground for the
appliance. Use copper conductors only.
WARNING

9
Wiring Schematics
Model: RT/RTS-30
WIRE CONNECTOR
MICROSWITCH 1
MICROSWITCH 2 MICROSWITCH 3
MICROSWITCH 4
T4NN400NCN
110~120V- 60Hz
IGNITION
ALLUMAGE
RED
GREEN
WHITE
RED GROUND
WIRE
Model: RT/RTB/RTS-36
WIRE CONNECTOR
MICROSWITCH 1
MICROSWITCH 2 MICROSWITCH 3
MICROSWITCH 4 MICROSWITCH 5 MICROSWITCH 6
T6NN600NCN
110~120V- 60Hz
IGNITION
ALLUMAGE
RED
GREEN
WHITE
RED GROUND
WIRE

10
Wiring Schematics
Model: RT/RTB/RTS-48
T7NN700NCN
WIRE CONNECTOR
MICROSWITCH 1
MICROSWITCH 2 MICROSWITCH 3
MICROSWITCH 4
MICROSWITCH 5 MICROSWITCH 6
MICROSWITCH 5 MICROSWITCH 7
110~120V- 60Hz
IGNITION
ALLUMAGE
RED
GREEN
WHITE
RED GROUND
WIRE

11
GAS CONNECTION
All gas connections must comply with national and local codes. The gas supply
line (service) must be the same size or greater than the inlet line of the appliance.
This range uses a ½˝ NPT inlet. Use appropriate sealant on all pipe joints that are
resistant to gas.
This range can be used with Natural or LP/propane gas. The range is shipped from
the factory for use with natural gas.
For LP/Propane household installation, the appliance must be converted by the
dealer, factory-trained professional, or qualified licensed plumber or gas service
company.
Gas conversion is important for safe and effective use of the appliance. It is the
responsibility of the dealer and the owner of the range to perform the appropriate
gas conversion following the directions of the manufacturer.
The gas conversion procedure is described in this manual and in the package
containing the conversion nozzles shipped with every range.
Please provide the service person with this manual before work is started on the
range.
Leak testing of the appliance shall be conducted according to the manufacturer’s
instructions. Before operating the appliance, always check for leaks with soapy
water solution or other acceptable method. Check for gas leakage with soapy
water solutions on all gas connections between inlet gas pipes of the appliance, the
gas regulator and, the manual shut-off valve. Bubbles will form with a soapy water
solution if there is a leak.
DO NOT use an open flame when checking for leaks.
WARNING