Zodiak R255VDIR/G User manual

Digital Video Security Systems
3D-DNR DAY & NIGHT COLOR CAMERA
Anti-Vandal & Water-Resistant
3D-DNR DAY & NIGHT CAMERA
R255VDIR/G
R255VDIR/W
USER MANUAL
3-DNR
OSD
Camera

Digital Video Security Systems
3D-DNR DAY & NIGHT COLOR CAMERA
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
This installation should be made by a qualified service person and
should conform to all local codes.
CAUTION : To prevent electric shock and risk of fire hazards:
☞Do NOT use power sources other than those specified.
☞Do NOT expose this appliance to rain or moisture.

Digital Video Security Systems
3D-DNR DAY & NIGHT COLOR CAMERA
Precautions
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Do not install or use the camera in an
environment where the humidity is high.
Do not drop the camera or subject
it to physical shocks.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Never keep the camera pointed
directly at strong light.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful
to provide ventilation whenoperating
under high temperatures.
This is one of the most important parts
of the camera. Be careful not to leave
fingerprints on the lens cover.
Do not install or use the camera in an
environment where the humidity is
high.
It can cause malfunctions to occur.
If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Severe lighting change or flicker can
cause the camera to work improperly.
Resistant from external strong impact,
pressure, shock, dust or explosion.
This camera has been designed as
weatherproof with IP66 certication.
It has a high strength and and durable
exterior material of Die Cast Aluminum
body and Polycarbonate dome.
This camera can be installed at anywhere
even exterior places.

Digital Video Security Systems
- 1 -
3D-DNR DAY & NIGHT COLOR CAMERA
Contents
Contents 1
2
3
5
4
6
7
30
Specification
How to Install
About 3D - DNR
Installation
Sefety Instructions
General Features
Trouble Shooting
Menu Set Up
▶Menu Set Up
▶Lens Set Up
▶Exposure
▶Back Light
▶D-WDR
▶White Bal.
▶Day & Night
▶3DNR
▶Special
▶Adjust
▶Reset
▶Exit
◈Camera Title
◈D - Effect
◈Motion
◈Privacy
◈Sync
◈Return
8
8
28
11
29
12
29
14
17
18
19
20
21
21
24
26
27
28
28

Digital Video Security Systems
- 2 -
3D-DNR DAY & NIGHT COLOR CAMERA
About D-WDR/BLC/ 3D DNR
DNR DSP Chip
DNR
DSP Chip
DNR
DSP Chip
Privacy
Masking
Mirror
CCD Defect
Compensation
AE/AWB/AF
Sens-Up
Noise
Reduction
Motion
Detection
OSD IC CPU
(16 Bit)
DNR
SDRAM
Line Lock
(Digital)
DISK SAVING
Digital Image Stabilizer
3D-DNR
Digital
Reduction
Noise
Anti-Vandal
DAY & NIGHT
Resolution
Horizontal
DSP
0.00001 Lux
Illumination
Minimum
DNR
550
Wide Dynamic Range
Digital
WDR
ILBCT
IR
Backlight
Compensation
BLC
OSD
DNR DSP Chip
DNR
DSP Chip
DNR
DSP Chip
Privacy
Masking
Mirror
CCD Defect
Compensation
AE/AWB/AF
Sens-Up
Noise
Reduction
Motion
Detection
OSD IC CPU
(16 Bit)
DNR
SDRAM
Line Lock
(Digital)
DISK SAVING
Digital Image Stabilizer
3D-DNR
Digital
Reduction
Noise
Anti-Vandal
DAY & NIGHT
Resolution
Horizontal
DSP
0.00001 Lux
Illumination
Minimum
DNR
550
Wide Dynamic Range
Digital
WDR
ILBCT
IR
Backlight
Compensation
BLC
OSD
DNR DSP Chip
DNR
DSP Chip
DNR
DSP Chip
Privacy
Masking
Mirror
CCD Defect
Compensation
AE/AWB/AF
Sens-Up
Noise
Reduction
Motion
Detection
OSD IC CPU
(16 Bit)
DNR
SDRAM
Line Lock
(Digital)
DISK SAVING
Digital Image Stabilizer
3D-DNR
Digital
Reduction
Noise
Anti-Vandal
DAY & NIGHT
Resolution
Horizontal
DSP
0.00001 Lux
Illumination
Minimum
DNR
550
Wide Dynamic Range
Digital
WDR
ILBCT
IR
Backlight
Compensation
BLC
OSD
DNR DSP Chip
DNR
DSP Chip
DNR
DSP Chip
Privacy
Masking
Mirror
CCD Defect
Compensation
AE/AWB/AF
Sens-Up
Noise
Reduction
Motion
Detection
OSD IC CPU
(16 Bit)
DNR
SDRAM
Line Lock
(Digital)
DISK SAVING
Digital Image Stabilizer
3D-DNR
Digital
Reduction
Noise
Anti-Vandal
DAY & NIGHT
Resolution
Horizontal
DSP
0.00001 Lux
Illumination
Minimum
DNR
550
Wide Dynamic Range
Digital
WDR
ILBCT
IR
Backlight
Compensation
BLC
OSD
D-WDR(Digital Wide Dynamic Range)
550TV Lines
High Spotlight BLC Function
3D Filtering Method of Newly
Advanced DNR Function
D-WDR is a powerful and ultra advanced technology
that captures cleaner and superior high Resolution pic-
tures even where images appear dark because there is
a strong back light present.
The combination of a Sony Super HAD CCD image sen-
sor and DNR DSP provides an excellent resolution of
550 TV lines.
Newly developed 3D filtering enhances Digital Noise
reduction at low light levels. 3D Filtering of the Video
Signal Optimises the Signal to Noise ratio, giving vastly
improved low light visivility and a powerful Sens-Up
function (up to 258 times magnification).
High Spotlight BLC Function is Especially Effective to
Read the Number Plate of the Vehicles in the Street or
Parking Lot at Night Time. Especially Users Can Adjust
and Select the Special Required Area to Observe the
Target Object Under the Strong Spots of Light Exist.
Digital WDR OFF
3D-DNR OFF
Normal BLC
Standard Camera
Digital WDR ON
3D-DNR ON
HS BLC
550TV Lines Camera
550TV Lines 3D-DNR
OSD Control Digital Zoom
HS BLC Digital WDR
1. LENS
2. EXPOSURE
3. WHITE BAL
4. DAY NIGHT
5. 3DNR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
SETUP
DC
ATB
COLOR
OFF
SHUTTER
BRIGHTNESS
AGC
SENS-UP
BLC
D-WDR
RETURN
EXPOSURE
1 / 60
48
HIGH
AUTO
OFF
OFF
RET
1. CAM TITLE
2. D-EFFECT
3. MOTION
4. PRIVACY
5. SYNC
6. LANGUAGE
7. RETURN
SPECIAL
OFF
OFF
OFF
INT
ENGLISH
RET
- 1/3” Sony Super HAD CCD
- Up-Most High Resolution :
Color - 550TV Line / B/W - 600TV Lines
- Built-In Next Generation 3D DNR with 3D Filter
- Max. Sens-Up (x258), 0.00001 Lux of Min. Illumination
- Convenient OSD control function
- x32 Digital Zoom
- Free Area Selectable function of BLC and MD
- Privacy Color Masking for 8 Area selection
- Camera OSD control
- ICR-IR Infrared Cut Filter Removable(Option)
- Max 70% of Disk Saving Effect with Super DNR
- Negative Image Function
- Digital Wide Dynamic Range Function(D-WDR)
- Dual Power(AC 24V / DC 12V)
DNR DSP Chip
DNR
DSP Chip
DNR
DSP Chip
Privacy
Masking
Mirror
CCD Defect
Compensation
AE/AWB/AF
Sens-Up
Noise
Reduction
Motion
Detection
OSD IC CPU
(16 Bit)
DNR
SDRAM
Line Lock
(Digital)
DISK SAVING
Digital Image Stabilizer
3D-DNR
Digital
Reduction
Noise
Anti-Vandal
DAY & NIGHT
Resolution
Horizontal
DSP
0.00001 Lux
Illumination
Minimum
DNR
550
Wide Dynamic Range
Digital
WDR
ILBCT
IR
Backlight
Compensation
BLC
OSD
Illumination
With an Incredibly Minimum Illumination of Amazing
0.00001Lux can Capture Good Images Even in
Extremely Low Light Conditions and Related Noises
are Significantly Reduced by the Ultra Advanced
DNR(Digital Noise Reduction) Technology.
Standard Image Minimum Illumination Image
GENERAL FEATURES

Digital Video Security Systems
- 3 -
3D-DNR DAY & NIGHT COLOR CAMERA
Specication
550TV Lines
DC Auto Iris Varifocal
Lens(2.8mm-12mm)
True Day/Night Capability
ICR-IR Cut Filter Removable
850nm IR LEDs * 33pcs
IP 66
DC 12V / 24V AC( Dual Power)
SPECIFICATIONS
MODEL
R255VDIR/G R255VDIR/W
GENERAL FEATURES
* 1/3" Sony Super HAD CCD
*
Built-In Next Generaltion 3D DNR with 3D Filter
* Third-Generation DSP Chip
* True Day & Night (ICR-IR Cut Filter Removable)
*
Max. 258X Sens-Up, 0.00001 Lux of Maximum Illumination
* x32 Digital Zoom
*
D-WDR(Digital Wide Dynamic Range)
* Vivid Sharp Picture in completely darkness
* DC Auto Iris Varifocal Lens(4mm-9mm),
(3.5mm-16mm)-Option
* DC 12V / 24V AC - Dual Power
Sensor
Total Pixels
Effective Pixels
Scanning System
Synchronization
O.S.D
Backlight
Resolution
S/N (Y signal)
Min. Illumination
White Balance
Electronic Shutter Speed
Sense-Up
Gain Control
3 DNR
D-WDR
Motion Detection
Privacy
Mirror
Freeze
Sharpness
D&N Selection
Digital Zoom
Blemish Compensation
Power
Power Consumption
Lens
Operating Temperature/Humidity
Storage Temperature/Humidity
Dimension
Weight
1/3" SONY Super HAD CCD
NTSC=811(H) * 508(V) / PAL=795(H) * 595(V)
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)
2:1 Interlace
Internal / Line Lock
Available
BLC / HSBLC / Off Selectable
550TV Lines(Color), 600TV Lines(B/W)
52dB (AGC Off, Weight On)
0.000006Lux(IR LED ON)
ATW / AWB / Manual / AWC →SET
AUTO (1/50sec, 1/60sec ~ 1/120,000sec)
Off / Auto(Selectable limit *2 ~ *258)
High, Middle, Low, Off Selectable
Off/On (1~50 Level Adjustable)
Indoor / Outdoor / Off
On/Off (4 Zone, Alarm Output)
On/Off (8 Zone)
Off / Mirror / V-Rev / Rotate
On/Off
0~31’(Level Adjustable)
Color /BW /Auto
On(*32) / Off
256 Point (Even 128 Point, ODD 128 Point)
DC 12V / 24V AC - Dual Power
CDS ON:450mA Max
DC Auto Iris Varifocal Lens(2.8mm-12mm)
-10˚C ~ +50˚C. RH 95% Max.
-20˚C ~ +60˚C. RH 95% Max.
140mm(W) * 100mm(H) * 140mm(D)
900g
x258
550
140

Digital Video Security Systems
- 4 -
3D-DNR DAY & NIGHT COLOR CAMERA
Installation
x258
550
OSD
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY NIGHT
5.3DNR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC
ATB
COLOR
OFF
x258
550
x258
550
True Day & Night
(ICR-IR Cut Filter Removable)
OSD Control Board
SETTINGS
Settings can be made using the OSD button
located on the bottom of the camera.
SET UP MENU DEFAULT SET MENU
LENS
EXPOSURE
WHITE BAL.
DAY / NIGHT.
3D-DNR
SPECIAL
ADJUST
RESET
EXIT
DC
SHUTTER
BRIGHTNESS
AGC: ---
SENS-UP
BLC
D-WDR
RETURN
SHARPNESS
BLUE
RED
RETURN
ATW
AUTO/B/W COLOR/EXT
ON
Refer to the next page
FACTORY
DC : LEVEL (0 ~100 Adjustable)
ON (RANGE : 0 ~100 Level Selectable) / OFF
Save the SETUP Menu and exit
SHUTTER : FLK/ 1/60 / 1/250, 1/500, 1/2000, 1/5000,
1/10000, 1/100000
BRIGHTNESS -----
AGC : OFF / LOW / MIDDLE/ HIGH
SENS-UP : x2~ x258 Level Selectable
BLC : OFF / BLC (GAIN : LOW, MIDDLE, HIGH/ DEFAULT :
LEFT/RIGHT, WIDTH, TOP/
BOTTOM, HEIGHT, RTURN) /
HSBLC (LEVEL : RANGE 1~8 Selectable/ DEFAULT :
LEFT/RIGHT, WIDTH, TOP/BOTTOM,
HEIGHT, RETURN)
D-WDR : OFF / INDOOR/ OUTDOOR
RETURN
ATW/ AWB/ MANUAL(R Gain : 0 ~100 Level Selectable,
B Gain : 0 ~100 Level Selectable)
/ AWC SET
SHARPNESS : (RANGE : 0 ~ 31 Level Adjustable)
BLUE : (RANGE : 0 ~ 100 Level Adjustable)
RED : (RANGE : 0 ~ 100 Level Adjustable)
RETURN
COLOR
AUTO : DELAY (0~63) / S-LEVEL(0~100)/ E-LEVEL(0~100)
RESET

Digital Video Security Systems
- 5 -
3D-DNR DAY & NIGHT COLOR CAMERA
How To Install
* Camera Adjustment
① Connect Video & Power Line (DC 12V/ AC 24V Regulated Power)
② Position the camera for the correct angle of view.
③ Loosen the locking screws and focus the camera.
④Re-tighten the locking screws.
* Portable connector for easy installation of the camera.
- A portable monitor can be connected to the camera,
allowing the operator to easily adjust camera angles
and settings locally during installation.
x258
550
x258
550
C
able
C
onnectio
n
T
rue Day
&
Nigh
t
(
I
C
R-IR
C
ut Filter Removable
)
P
ower
j
ac
k
Vid
eo
J
ac
k
P
ower
(
+
)
P
ower
(
-
)
V
ideo
S
ignal
V
ideo
G
N
D
x258
550
x258
550

Digital Video Security Systems
- 6 -
3D-DNR DAY & NIGHT COLOR CAMERA
Safety Instructions
Precautions for use
Please read this manual thoroughly before using the camera to become familiar with the
correct operational procedures.
Cautions When Using
Do not open the camera body and touch any electrical parts to avoid possible electric shocks.
Do not insert objects into the camera body to prevent fire hazards and electric shock.
Do not touch the camera with wet hands to avoid electric shock.
Do not disconnect the power cord from a power plug when still connected to the outlet.
Always disconnect the power by removing the plug from the power socket.
lf the camera emits a burning smell, immediately disconnect it from the power source and
report the problem to your distributor.
Cautions When Install
Only apply power after installation of the product.
Do not install the camera in a position facing directly at a strong light source.
Do not install or use the camera in areas of high humidity.
Do not install near any cooling or heating equipment.
Do not install the camera in dusty environments.
Do not install the camera in places where the camera is subjected to physical shocks.
This products must be used with a regulated DC 12V or AC 24V adaptor for power.
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞

Digital Video Security Systems
- 7 -
3D-DNR DAY & NIGHT COLOR CAMERA
General Features
D-WDR (Digital Wide Dynamic Range)
The DWDR range of camera use very advanced D-WDR technology, which
gives clear images even where the scene is strongly backlit. Selectable sensitivity
indoor and outdoor
550 TV Lines
The combination of a Sony Super HAD CCD image sensor and 3DNR DSP provides
an excellent resolution of 550 TV lines.
Day & Night
Depending on luminance levels the camera switches automatically between colour and
monochrome. The camera’s IR cut-filter gives perfect colour rendition during the day.
Illumination
3DNR technology has solved the problem of ghosting and now displays clearer, superior,
high resolution images even in extremely low light conditions.
3DNR DSP Chip
The DNR DSP chipset has various powerful functions that give superior high resolution Day & Night images. it
removes the camera noise and Sens-Up provides quality images at very low luminance levels. The most advanced
technology is combined on a single DSP chipset, resulting in enhanced surveilance images.
Disk Saving Effects
Advanced 3DNR technology improves picture quality and saves hard drive space, as less
noise means much smaller file sizes - much smaller than standard CCTV camera images.
Additional Functions
OSD - On Screen Display menu with multi-Language support.
Privacy Masking - 8 zones, Sens-Up - x128 times, Digital Zoom - x36
☞
☞
☞
☞
☞
☞
☞
DISK SAVING
Digital Image Stabilizer
3D-DNR
Digital
Reduction
Noise
DAY & NIGHT
Resolution
Horizontal
DSP
0.00006 Lux
Illumination
Minimum
3D-DNR
550
Wide Dynamic Range
Digital
WDR
Backlight
Compensation
BLC
OSD
DISK SAVING
Digital Image Stabilizer
3D-DNR
Digital
Reduction
Noise
DAY & NIGHT
Resolution
Horizontal
DSP
0.00006 Lux
Illumination
Minimum
3D-DNR
550
Wide Dynamic Range
Digital
WDR
Backlight
Compensation
BLC
OSD
DISK SAVING
Digital Image Stabilizer
3D-DNR
Digital
Reduction
Noise
DAY & NIGHT
Resolution
Horizontal
DSP
0.00006 Lux
Illumination
Minimum
3D-DNR
550
Wide Dynamic Range
Digital
WDR
Backlight
Compensation
BLC
OSD
DISK SAVING
Digital Image Stabilizer
3D-DNR
Digital
Reduction
Noise
DAY & NIGHT
Resolution
Horizontal
DSP
0.00006 Lux
Illumination
Minimum
3D-DNR
550
Wide Dynamic Range
Digital
WDR
Backlight
Compensation
BLC
OSD
DISK SAVING
Digital Image Stabilizer
3D-DNR
Digital
Reduction
Noise
DAY & NIGHT
Resolution
Horizontal
DSP
0.00006 Lux
Illumination
Minimum
3D-DNR
550
Wide Dynamic Range
Digital
WDR
Backlight
Compensation
BLC
OSD
DISK SAVING
Digital Image Stabilizer
3D-DNR
Digital
Reduction
Noise
DAY & NIGHT
Resolution
Horizontal
DSP
0.00006 Lux
Illumination
Minimum
3D-DNR
550
Wide Dynamic Range
Digital
WDR
Backlight
Compensation
BLC
OSD
DISK SAVING
Digital Image Stabilizer
DNR
Digital
Reduction
Noise
Anti-Vandal
DAY & NIGHT
Resolution
Horizontal
DSP
0.00006 Lux
Illumination
Minimum
DNR
560
Wide Dynamic Range
WDR
ILBCT
IR
Backlight
Compensation
BLC
OSD

Digital Video Security Systems
- 8 -
3D-DNR DAY & NIGHT COLOR CAMERA
SET UP MENU DEFAULT SET MENU
LENS
EXPOSURE
WHITE BAL.
DAY / NIGHT.
3D-DNR
SPECIAL
ADJUST
RESET
EXIT
DC
SHUTTER
BRIGHTNESS
AGC: ---
SENS-UP
BLC
D-WDR
RETURN
SHARPNESS
BLUE
RED
RETURN
ATW
AUTO/B/W COLOR/EXT
ON
Refer to the next page
FACTORY
DC : LEVEL (0 ~100 Adjustable)
ON (RANGE : 0 ~100 Level Selectable) / OFF
Save the SETUP Menu and exit
SHUTTER : FLK/ 1/60 / 1/250, 1/500, 1/2000, 1/5000,
1/10000, 1/100000
BRIGHTNESS -----
AGC : OFF / LOW / MIDDLE/ HIGH
SENS-UP : x2~ x258 Level Selectable
BLC : OFF / BLC (GAIN : LOW, MIDDLE, HIGH/ DEFAULT :
LEFT/RIGHT, WIDTH, TOP/
BOTTOM, HEIGHT, RTURN) /
HSBLC (LEVEL : RANGE 1~8 Selectable/ DEFAULT :
LEFT/RIGHT, WIDTH, TOP/BOTTOM,
HEIGHT, RETURN)
D-WDR : OFF / INDOOR/ OUTDOOR
RETURN
ATW/ AWB/ MANUAL(R Gain : 0 ~100 Level Selectable,
B Gain : 0 ~100 Level Selectable)
/ AWC SET
SHARPNESS : (RANGE : 0 ~ 31 Level Adjustable)
BLUE : (RANGE : 0 ~ 100 Level Adjustable)
RED : (RANGE : 0 ~ 100 Level Adjustable)
RETURN
COLOR
AUTO : DELAY (0~63) / S-LEVEL(0~100)/ E-LEVEL(0~100)
RESET
Menu Set-Up
OSD
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY NIGHT
5.3DNR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC
ATB
COLOR
OFF
Focus Control
IR LED
CDS Sensor
DC Auto Iris Varifocal Lens
(4mm-9mm)
OSD Control
Sunshield
BaseBracket
Case
Cable
C
able
C
onnectio
n
T
rue Da
y
&
Ni
g
h
t
(
I
C
R-IR
C
ut Filter Removable
)
P
ower
j
ac
k
Vid
eo
J
ac
k
P
ower
(
+
)
P
ower
(
-
)
V
ideo
S
ignal
V
ideo
G
N
D
Focus Control
IR LED
CDS Sensor
DC Auto Iris Varifocal Lens
(4mm-9mm)
OSD Control
Sunshield
BaseBracket
Case
Cable
C
able
C
onnectio
n
T
rue Da
y
&
Ni
g
h
t
(
I
C
R-IR
C
ut Filter Removable
)
P
ower
j
ac
k
Vid
eo
J
ac
k
P
ower
(
+
)
P
ower
(
-
)
V
ideo
S
ignal
V
ideo
G
N
D
True Day & Night
(ICR-IR Cut Filter Removable)
OSD Control Board
SETTINGS
Settings can be made using the OSD buttons
Located on the bottom of the camera.

Digital Video Security Systems
- 9 -
3D-DNR DAY & NIGHT COLOR CAMERA
SPECIAL MENU DEFAULT SET MENU
CAMERA TITLE OFF
D - EFFECT ON
MOTION ON
PRIVACY ON
SYNC INT
RETUEN
ON / OFF
END
FREEZE / MIRROR/ D-ZOOM/ GAMMA/ NEG. IMAGE
AREA SELECT : AREA 1
AREA DISPLAY : ON / OFF
LEFT / RIGHT : 0 ~ 100 Level Adjustable
WIDTH : 0 ~ 100 Level Adjustable
TOP / BOTTOM : 0 ~ 100 Level Adjustable
HEIGHT : 0 ~ 100 Level Adjustable
SENSITIVITY : 0 ~ 40 Level Adjustable
RETURN
AREA SELECT : AREA 1
AREA DISPLAY : ON / OFF
LEFT / RIGHT : 0 ~ 100 Level Adjustable
WIDTH : 0 ~ 100 Level Adjustable
TOP / BOTTOM : 0 ~ 100 Level Adjustable
HEIGHT : 0 ~ 100 Level Adjustable
COLOR : Selectable in 15 Color
RETURN
Special Menu

Digital Video Security Systems
- 10 -
3D-DNR DAY & NIGHT COLOR CAMERA
Menu items can be selected by using the OSD buttons of the camera
1. Press the Set Up button.
* The Set Up menu will be displayed on the monitor.
2. Move and select the required function using the Up and Down button.
* Move the arrow indicator Up or Down to select the desired feature by pressing
the Up or Down button.
SETUP
SETUP
LENS
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
LENS
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DC
ATW
COLOR
ON
DC
ATW
COLOR
ON
Menu Set Up

Digital Video Security Systems
- 11 -
3D-DNR DAY & NIGHT COLOR CAMERA
3. Changing menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After completing the setting move the arrow indicator to EXIT and press the
SET button to EXIT.
1. Move the arrow indicator to LENS using the Up and Down buttons on the Set Up menu screen.
2. Select the desired lens type by pressing the Left or Right button.
NOTE
* Move to the available submenu by moving arrow to desired feature.
* Submenu is not available when this symbol is display "- - - -"
Lens
SETUP
LENS
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DC
ATW
COLOR
ON
DC:DC Auto Iris Lens

Digital Video Security Systems
- 12 -
3D-DNR DAY & NIGHT COLOR CAMERA
3. Press the RETURN to return to the SETUP menu.
NOTE
* When DC is selected, the brightness can be adjusted. The brightness control
range is 1 ~ 100.
Lens
BRIGHTNESS
RETURN
100
This function is used to select Automatic or Manual shutter speed control.
1. On the Set Up menu screen select EXPOSURE by using the Up or Down button.
2. Select the desired shutter mode by pressing the Left or Right button.
* FLK : Select FLK mode when flickering occurs; caused by the unmatched frequency of electric lights.
Exposure
SETUP
LENS
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DC
ATW
COLOR
ON

Digital Video Security Systems
- 13 -
3D-DNR DAY & NIGHT COLOR CAMERA
EXPOSURE
SENS-UP
SHUTTER
BRIGHTNESS
SENS-UP
BLC
D-WDR
RETURN
SENS-UP
RETURN
FLK
- - - -
HIGH
AUTO
BLC
OFF
x 2
NOTE
* To produce better results with FLK, do not use it in conjunction with the WDR
mode in the BACKLIGHT menu.
* Desired shutter speed can be selected by user 1/60, 1/250, 1/500, 1/2000, 1/5000,
1/0000, 1/100000, FLK .
* Brightness just can operate when selected the Manual mode(Option), When
selected DC mode, brightness will be disabled .
* AGC(AUTO GAIN CONTROL):
A higher gain increases brightness but also increases any noise.
OFF : Deactivates the AGC function
LOW : Allows automatic gain control to LOW.
MIDDLE : Allows automatic gain control to MIDDLE.
HIGH : Allows automatic gain control to HIGH
* SENS - UP:
At night and/or in dark conditions, the Sens-Up mode can be selected desired value from x2 ~ x258.
* FLK : Select FLK mode when flickering occurs; caused by the unmatched frequency of electric lights.

Digital Video Security Systems
- 14 -
3D-DNR DAY & NIGHT COLOR CAMERA
* OFF : BLC function does not operate.
* BLC : Users can select and define a specific area in a scene, and view the area clearly.
* HSBLC : When there are simultaneous brightness & dark image areas HSBLC makes both distinct.
* RETURN:
Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu.
NOTE
* Pressing the SET button in AUTO mode allows adjustment of image brightness
by increasing or decreasing the shutter speed (x2 ~x258).
* The higher the level, the brighter the image becomes, but it is possible that an
after image (ghosting) could appear.
* When SENS-UP is activated the increased magnification can induce noise and
pixelation; this is quite normal.
Back Light(BLC)
This camera provides intelligent light level control to overcome even strong backlight conditions.
1. Move the allow indicator to BACKLIGHT using the Up or Down button on the SETUP menu screen.
2. Select the desired level by using the Left or Right button.
EXPOSURE
SHUTTER
BRIGHTNESS
AGC
SENS-UP
BLC
D-WDR
RETURN
1/60
- - - -
LOW
- - - -
BLC
OFF

Digital Video Security Systems
- 15 -
3D-DNR DAY & NIGHT COLOR CAMERA
3. Select a mode using the Left and Right buttons then press the SET button.
Select BLC to adjust the desired BLC area and GAIN level.
① Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
② Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
③ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by
using the LEFT or RIGHT button.
* GAIN : Adjust the BLC sensitivity by selecting LOW, MIDDLE or HIGH.
* DEFAULT : Press the Default to back to the factory default when input the wrong data .
BLC ON BLC OFF
BLC
GAIN
DEFAULT
LEFT / RIGHT
WIDTH
TOP / BOTTOM
HEIGHT
RETURN
LOW
7
8
7
8

Digital Video Security Systems
- 16 -
3D-DNR DAY & NIGHT COLOR CAMERA
4. Select HSBLC(High Suppress Backlight Compensation) by using the Left and Right buttons then press the
Set Up button to set up the desired HSBLC area and GAIN level.
* Move the arrow indicator to RETURN and press the Set Up button after complete the BLC area set to
return to EXPOSURE menu.
* LEVEL : Adjust the HSBLC sensitivity by selecting between 0~8.
* DEFAULT : Press the Default to return to the factory default when input the wrong data .
HSBLC OFF HSBLC ON
① Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
HSBLC
LEVEL
DEFAULT
LEFT / RIGHT
WIDTH
TOP / BOTTOM
HEIGHT
RETURN
8
7
8
7
8
② Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
③ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by
using the LEFT or RIGHT button.

Digital Video Security Systems
- 17 -
3D-DNR DAY & NIGHT COLOR CAMERA
D-WDR(digital WDR)
This camera provides intelligent light level control to overcome even strong backlight conditions.
1. Move the allow indicator to D-WDR using the Up or Down button on the EXPOSURE menu screen.
2. Select the desired feature by using the Left or Right button.
EXPOSURE
SHUTTER
BRIGHTNESS
AGC
SENS-UP
BLC
D-WDR
RETURN
1/60
- - - -
LOW
- - - -
BLC
OFF
* D-WDR : When there are simultaneous brightness & dark image areas WDR makes both distinct and can
be selected desired feature between OUTDOOR and INDOOR.
* OFF : D-WDR function does not operate.
* RETURN: Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu.