ZORO 2XZG1 Instructions for use

OPERATING INSTRUCTIONS & PARTS MANUAL (OIPM)
Folding Gate (2XZG1/2XZG2)
Closed Position Open Position
Pin &
Pin &
Hinge bar Hinge Bar
Locking
Bar (B)
Locking Bar (B)
CASTER
Pin &
Washer
Pin &
Washer Caster
Figure 1 Figure 2
1. Stand folded gate against the doorframe where you intend to
mount it. (See Figure 1)
Figure 3
Pin & Washer (D)
2. Mark center of hole on floor 1.5” away form wall to fit 5/8” pin
at bottom of gate. (See Figure 3)
3. Drill 3/4” hold in floor.
4. Place washer (D) over 3/4”hole.
5. Put gate (A) through washer and into hole. (See Figure 3)
6. Install hinge bar (C)on wall. Mark the mounting surface
through the holes in the hinge bar with a pen or pencil.(See
Figure 1 & 4) For mounting into:
Wood: use 5/16” ×2” Lag Bolts.
Steel: drill and tap for 5/16” ×1” Bolts.
Brick or concrete: 5/16” ×2” Lag Bolts in 3/8” holes
with lead anchors.
2XZG1/ 2XZG1
Manufactured for Grainger International, Inc. Lake Forest, IL 60045
7. Drill appropriate size holes in the mounting surface.
8. Mount the gate (A) by inserting the appropriate blots through
the hinge bar.
9. Stretch the gate (A) across the opening. Line up the locking
bar with a pen or pencil. (See Figure 2)
10. Mark though the mounting holes of the locking bar (B) with a
pen or pencil.
Pin,
Hinge bar
(C)
Figure 4
11. Drill holes and insert the appropriate bolts to mount the locking bar (B).
12. Pull the door (A) into the locking bar (B), and insert a padlock. (See Figure 2)
Picture 3
Fixing bar (E)
Figure 5
13. When moving gate, please use fixing bar (E) to lock for safety, please see Figure 5.

NOTE: Product images are shown for display purposes only and may not be representative of the final product.
PARTS LIST
Ref.# Description PartNumber Qty
1 2 3
Gate Locking Bar Hinge Bracket Washer
1 Pc with Caster 1 pc. 1 pc. 1 pc.
1 LockingBar MHLB001 1
2 HingeBracket MHHB001 1
3 Common Washer OD 1 ¾ X ID 5/8” X 1/8” Thick (Common Hardware Item)
PARTS
CAUTION!
Keep hands and fingers out of moving diamonds of web when handling gate.
WARNING: Consult safety codes and/or local authorities regarding proper use of this product.
2XZG1/ 2XZG1
Manufactured for Grainger International, Inc. Lake Forest, IL 60045