ENCLO Wilmington Screen Kit User manual

www.encloscreens.com
Wilmington
45 min
Approximate assembly time
Scan the QR code
for an assembly video
ASSEMBLY
INSTRUCTIONS
ZP19008
VER. 090221
Screen Kit
36" W x 45" H

www.encloscreens.com
2
ASSEMBLY INSTRUCTIONSZP19008
kCheck the inside of the larger pieces in your box for other
materials packed inside.
kWhen assembling components, place on a non-abrasive
surface (i.e. shipping box) to avoid scratching.
kWe recommend an area approximately 5’x 8’ for
unobstructed assembling.
kYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
and handling of this product, occasionally problems occur. If you

our website to order replacement parts. If you experience any
further trouble with your product, please contact our customer
service department.
parts.nychbrands.com
[email protected]om
704-892-5222 /877-234-6196
Customer service agents are available to take calls weekdays from 8am-
5pm EST. If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item
number ZP19008
on page 4. It is helpful if you can provide the batch lot which is a
stamped number on the end of the box.

this product, we are happy to assist you with the process, so
please give us a call at 704-892-5222 / 877-234-6196.
If for some reason you need to return this product, please

return the product, 

GENERAL
INFORMATION
MISSING OR
DAMAGED PARTS?
NEED ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT

www.encloscreens.com
3
ASSEMBLY INSTRUCTIONS ZP19008
2 5/8 in
33 3/8 in
43 in
45 1/2 in
1 in
36 1/2 in
Detailed Product Dimensions & Specifications

www.encloscreens.com
4
ASSEMBLY INSTRUCTIONSZP19008
Middle Rail (2)
1½" x 1½" x 36½"
(4)
(12) (6
installed, 6 loose)
 (4)
1½" x 1½" x 36½"
Post (4)
⅞" x 1½" x 44"
(4)
Picket (28)
¼" x 1¼" x 40"
STEP 1: LAY OUT MATERIALS
J
K
I
HA
B C
D E
F G

 (24)
 Bag A

 (8)
 Bag B
 (4)
¾" x 1¼" x 16" (1)

www.encloscreens.com
5
ASSEMBLY INSTRUCTIONS ZP19008
STEP 2: ASSEMBLE SCREEN FRAME

two Posts (B) as
illustrated, and
slide the top and
middle rails down
over the posts
(towards the locking
tabs).
Align the pre-drilled holes in the
posts with the pre-dilled holes in the
top and middle rails. Fasten together
using (8) ¾" Self-Drilling Stainless
Steel Screws (I).
Guide (14) Pickets (C)
down through the top and
middle rails. Push down

pickets lock into place.
Note: Top and Boom Rails only have picket holes on one side.
Top of screen
Align holes
B
G
D
E
D
C
J
 (D) and
Middle Rails (E)
Rail End Caps (G) into the ends of each rail.
STEP 2.1
STEP 2.2 STEP 2.4
STEP 2.3

www.encloscreens.com
6
ASSEMBLY INSTRUCTIONSZP19008
STEP 3: FINISH ASSEMBLING SCREEN
F



rail with the pre-drilled holes in the
posts. Insert each picket into the

10 in
1. Slide the Post Anchors (F)
the post. 10" of post anchor should be visible.
2. (K) to drill (4) total holes in
the post anchor through the pre-drilled holes in

3. 

2 3
STEP 3.1 STEP 3.2

www.encloscreens.com
7
ASSEMBLY INSTRUCTIONS ZP19008




ground as illustrated. All 10" of the
post anchors should be inserted into
the ground, so that they are no
longer visible.
STEP 4: ASSEMBLE SCREEN FRAME
Repeat steps 1
through 3 for your
second screen.
STEP 3.3
STEP 4.1 STEP 4.2

www.encloscreens.com
8
ASSEMBLY INSTRUCTIONSZP19008
1. Loosen the top 6” or 7” of the ground
with a claw hammer as illustrated.
2. Add water to loosened soil.
3. Use a block of wood to protect the top
of post, and gently hammer the post into
the ground.
Block of wood
3
1
2
STEP 4.3

www.encloscreens.com
9
ASSEMBLY INSTRUCTIONS ZP19008
1
1
2 3
STEP 4.4
Oponal in hard ground: If your ground is too hard, or you have more than 3 or 4

1. 
($15-$20 on Amazon.com).
2. 
with water as illustrated.
3. Push the panel posts into the holes.

www.encloscreens.com
10
ASSEMBLY INSTRUCTIONSZP19008
Level the screen as

excavated dirt.
If your ground is really hard, you
may need to dig a hole large enough
to accommodate one post from
each panel into the same hole -
Approximately 8” in diameter and 10”
deep
Level
STEP 4.5
STEP 4.6

www.encloscreens.com
11
ASSEMBLY INSTRUCTIONS ZP19008
Fasten screens together with
Joiner Clips (H) using the 1" Self-
Drilling Stainless Steel Screws (J)
as illustrated.
45° 

90°

STEP 5: FASTEN JOINER CLIPS
J
H
STEP 5.1

www.encloscreens.com
12
ASSEMBLY INSTRUCTIONSZP19008
Push the Post Caps (A)
down over the posts to
lock into place.
STEP 6: FASTEN POST CAPS
A
STEP 6.1

www.encloscreens.com
[e-mail]
704-892-5222
877-234-6196
6935 Reames Rd. Ste. K.
Charlotte, NC 28216
ASSEMBLY
INSTRUCTIONS
ZP19008
VER. 090221