ZOSI A3 Instruction manual

For more information of your new system, please refer to
www.zositech.com
Smart IP Camera with Battery
Quick User Guide

1
1. Packing list
2. Product Details
1 x camera
Working Status Indicator
Speaker
NO. Camera Operation
1 Power Key Press and hold for 5 seconds to power on/
power off
Iron Ball Wall Mount
TF Card Slot
DC5V USB Port
Reset key
Power key
Lens
IR Leds
PIR
Microphone
1x wall mount 1 x Double-sided
adhesive
1xUSB Cable 1 x Screws Sets
1 x Quick
User Guide
Quick User
Guide
4
5
4
6
5
7
6
8
7
9
11
10
10
11
9
8
3
3
2
2
1
1

2
2 Power Key Quick press 1 second to wake up the
camera from standby mode
3 Reset Key Press and hold for 5 seconds, it will reset
and restart
3. Install Cloudedge APP
31SearchCloudedgeinAppstoreorgoogleplaystore,
or scan below QR Code to download and install on smart
phone
NOTE: Please ALLOW below 2 permissions when first running
App.
(1) Allow CloudEdge use mobile cellular data and wireless LAN
(Function: If not allowed, it will be failed to add IP camera).
(2) Allow CloudEdge to get system push message permissions
(Function: When the camera triggers motion detection or audible
alarm, the phone can receive alarm push).

3
3.2 Register Account
4.1 Insert micro SD card
4.2 Power on the camera
3Setupi-Fi
New users need to register by e-mail, click "Register", follow the
steps to complete the registration of the account, and log in.
Please insert a micro SD card to record videos when motion
detected and playback. (card not included, supports 128GB Max.)
Press and hold on the Power Button for 5 seconds to Turn on
Camera (if can not power on, please plug in DC5V 1A/2A phone
adapter to charge 15min first), ensure the indicator light slowly
blinking in RED.
4.3.1 Bring the camera and phone to the router within 1 to 3 feet
(30 to 100 cm) and connect wifi.
TF Card Slot
Reset key
Power key
USB Powe
* NOTE: Please insert the SD card before power on, otherwise,
the SD Card cannot be read.
NOTE: DC5V1A/2A Power adapter is not included in packing list.
4. Add Camera to APP

4
Camera Router Smartphone
0.3~1m
NOTE: Please note camera only works under 2.4G Wi-Fi, not
supports 5G Wi-Fi.
4.3.2 Run CloudEdge App, Click andselectBATTERY
CAMERA.
4.3.3SelectThedevicehasflashedredslowlyoryouheara
tone,tapNEXT.
4.3.4Select2.4GhWiFiSSDandinputpassword,tapNEXT.
4.3.5 Put the QR code in front the camera lens 15cm.
4.3.6AfterclickingHeartone,camerawillstartconnectingwifi
andskiptoSearchtoDevicepageaftersetupfinished,youcan
editcameranamehere,thenclickDONEtoopencamerain
My Device list, now you can watch real-time video.
About 15cm(5.9 inches)
The device lens is aimed at the QR code on the phone screen
with a distance of 15 cm. After the device recognizes the QR
code,itwillsoundbugu,ifheardit,thentapHearTone.

5
5. Device Menu
Add a camera
Camera time
Live view button
Alarm information
icon red dot indicates
alarm occurs,
click to view alarm
screenshot or video
Camera name
Camera type icon
My device list
Message options
Friend options
Personal homepage

6
Camera settings options,
such as alarm SD card, etc.
Battery capacity
Full screen option
Network signal strength
Local playback options
Recording options
Screenshot options
Alarm recording
Calendar option, click on it
to select the date
Alarm video, click on it
to play/pause
Alarm video clip
Record button
Humanbodydetection
option, green is activated,
default is on, and it is
detected by human body
infrared detection.
Reminder options
Intercom option, long press
it and then can talk
SD,HDoptions
Bit rate
Preview options
Screenshot button

7
6. Adjust the PIR Detecting Distance
7AlarmPushotificationandplayback
PRBodyDetectionisdefaultonandthedefaultsensitivity
isatMidandthedetectingdistanceis6meters(20ft),and
itisadjustableinMyDevice-DeviceSettings-Body
Detection".
NOTEHighersensitivityofferslongerdetectingdistance,butit
wouldleadtomorefalsealarms.Youareadvisedtosetupthe
sensitivityleveltoLoworMediumwhenyouinstallthecamera
outdoors.
BatterycamerawithPRsensorisnotdesignedfor7X24allday
recording, but just push alarm message notification to phone app
and record video to SD card when PIR sensor detected human
body motion events, then you can playback the motion videos
wherever you are via CloudEdge App.
Sensitivity Detecting Distance(For moving and living things)
Low Up to 4 meters (13ft)
Medium Up to 6 meters (20ft)
High Up to 8 meters (26ft)

8
When PIR is triggered, camera and system actions:
(1) Alarm Sound in app (please enable cloudedge app notification
in mobile setting and also mobile volume is on )
(2) Alarm Message Notification (please enable cloudedge app
notification in mobile setting)
(3) Alarm snapshot and video record on SD card (please insert
TF Card).
Alarm Record
Alarm Snapshot
Click it to play alarm
video recording clip
Click it to play alarm
video recording clip
8. Camera Installation
81oucanputitonanyflatplacetable,chair,floor,etc
82nstallwithallMount
8.2.1 A3 Wall Mount Installation
Fix the iron ball bracket to the wall with screws or double-
sided adhesive, and then magnetize the camera to the iron ball.
Installation is very convenient and also easy to adjust the ang.

9
9mportantotesforReducingFalse
Alarms
91oreducefalsealarms,pleasenotethat
9.2 Cover the Monitoring Area
Donotinstallthecamerafacinganyobjectswithbrightlights,
including sunshine, bright lamp lights, etc.
Donotplacethecameratooclosetoaplacewherethere
frequently moving vehicles. Based on numerous tests, the
recommended distance between the camera and vehicle is 15
meters (55ft).
Stayawayfromtheoutlets,includingairconditionervents,
humidifier outlets, the heat transfer vents of the projectors, etc.
Donotinstallthecamerafacingthemirror.
Keepthecameraatleast1meterawayfromanywireless
devices, including Wi-Fi routers and phones, in order to avoid
wireless interference.
Wheninstallingthecamera,itsnotsuggestedtomakethePR
sensor vertically face the moving object, otherwise it may not
detect the motion events. It is suggested to make the angular
between PIR sensor and detected object larger than 10 degree.

10
Entrance
The path of the
moving object
It's not suggested to
make the PIR sensor
vertically face the
moving object.
YES NO
Ideal Viewing Distance:
2-10 meters(7-33ft)

11
AppendixLEDStatusDescriptionandtroubleshooting
sheet
LED Status Description
No. LED Status Camera Status
1Slow blinking
Red Awaiting WiFi Connection
2Fast blinking
Red WiFi Connecting
3 Solid on Red Network is abnormal
4 Solid on Blue WiFi Connected
Trouble Shooting Sheet
No. Description Solution and operation
1Unable to
connect
1) Check your WiFi name and password
2) Ensure your WiFi is 2.4G, not support
5G
3) Ensure your camera and phone close to
router
2 Reset
1) Press and hold the reset button for 5
seconds
2)Hearonebugusound
3) Red light turns to slow blinking
3Change to a
new network
1) Press reset key to factory default setting
2) Re-connection
4Failed to add
Device
Please enable CloudEdge app cellular
data on in mobile settings
5No Alarm
Push
Please enable CloudEdge app notification
in mobilesettings
6No Alarm
Video Record Please insert TF Card

All rights reserved. No part of this publication may be
reproduced by any means without written permission
from ZOSI. The information in this publication is
believed to be accurate in all respects.
ZOSI cannot assume responsibility for any
consequences resulting from the use thereof. The
information contained herein is subject to change
without notice. Revisions or new editions to this
publication may be issued to incorporate such
changes.
www.zositech.com
[e-mail]
PROFESSONALSECURTYMADEEASY