ZQRACING MA1171 User manual
0
e
Body(Base stem
+D
es
k
mount base) X1
Nylon Clip X5 Laptop Plate X1
Laptop Adapter
Components X1
Laptop Clio Shoe
X2
Arm X2
Adjustable Clasp 1 O"Tablet Holder X1 ?"Tablet Holder X1
X2
Tablet Adaptor X1 6mm Hex Key X1 4mm Hex Key X1
Chair Mount base X1
M
A
1171 Multi-function attachment
Arms (Laptops, Tablets, Ipads &
Smartphones Holders)
Box Contains
1.For Installation on
open edge of work suace:
1
2
3
4
2.For Installation through
a grommet hole(Dia.58mm):
Installation Instruction
M
A
1171 Multi-function attachment
Arms (Laptops, Tablets, Ipads &
Smartphones Holders)
5 Insert Tablet/smart phone
adapter to notch, screw on.
•
8 Place laptop adapter align with
hole pattern(A), then install
universal Joint(B), screw nut
(C), tighten Clamp Screw (D).
6 Slip device holder onto the
adapter. Tilt can be adjusted
and fixed with
4
mm Hex key.
7 Pull the holder open and
place your device into it.
l
Attention: Slide out laptop
holder by Pressing the button
underneath.
9 Slide Laptop holder into universal 1 0 Snap plate clip shoe from 11 Place laptop well and adjust
Joint(B), tighten clamp screw. central notch to both side, then both edges, lock laptop in.
slide adjustable clasp along press plate clips to fix laptop.
the grooves.
*For pre-assembled armrest, unbolt four bolts fixing armrest under seat base on the side you wish to install.
3.For Installation on Chairs
with Armrests:
1 Insert chair mounting base,
so it covers armrest mount.
R
-
4
Make sure to align all bolt holes.
2
U
se
6
mm Hex Key to unbolt
3
C
onne
c
t
ba
se ste
m
a
n
d
c
h
ai
r
Thank you for purchasing with ZQRacing. If you have any question regards to your
purchase or installation. Please feel free to contact us on 1300 977 224 or email:
MA1171 Multi-funtion attachment arms fit most ZQRacing Chairs with armrests.
Additional desk mount included, the arms could be fitted to desk if needed.
4
Mobile & Tablet Holder Large Tablet &Laptop Holder
A
B
C
D
B
