ZUMBA LOUD ZL10AT User manual

Powered by:
ZL10at
Self Powered, 3-Way
tower Loudspeaker
USER MANUAL

System features
ZL-10AT Self Powered 3-Way Tower Loudspeaker
Congratulations on your purchase of the ZL-10AT Tower Speaker
System! We know you are excited to stream some music, and this
section will help you set up in less than one minute.
The ZL-10AT is a 3-way active portable Tower speaker System
designed for the in-house and on-the-go entertainer. This Tower
speaker System delivers quality sound for everyone whether it be
bands, mobile DJing, installations in clubs, lounges, bars; The sky is
the limit!, ZL-10AT provides stunning Led Light show that moves with
the rich sound that no one is able to resist.
• ZL-10AT: 60Hz-18Khz, Max SPL 124dB. 1000W power
• 10” woofer (PRO-Z10AT) for low-end punch in a compact enclosure
and 6x3" Mid-range, 2x1" silk & titanium tweeter
• LCD Media player with TWS technology
• Input level meters and independent amplifier control to ensure
optimal gain structure
• Front lighted logo for power on indication
• Class-D amplifier
• Full color LED lights on the bottom speaker tower
• Heavy-duty steel grill
• Setup in one minute!
• Subwoofer handle for transportation ease
• USB player with folder search function
• 3.5mm AUX Jack input
• XLR/TRS combo input with mic/line selector
• XLR mix output
1

The ZL-10AT Tower Speaker includes a fully integrated audio system with carefully matched
electronics and transducers.
1.Connect the supplied AC power cord on
the rear of the speaker to an available
power outlet.
2.Insert your USB flash to the USB
connector.
3.Turn the MP3 LEVEL and MASTER
knobs to the MIN position.
4.Turn on the POWER switch.
5.Press PLAY button.
6.Adjust the MP3 LEVEL and MASTER
knob to the desired volume.
STEP ILLUSTRATION
Model ZL-10AT
To setup a full-range powered loudspeaker.
QUICK SETUP
USB
MP3
LEVEL
MIN MAX
MASTER
MIN MAX
MP3
LEVEL
MIN MAX
MASTER
MIN MAX
POWER
Powered by:
2

Extending the loudspeaker array
1. Align the connector on
the bottom of the LED
extension with the socket on
the power stand, then push
the LED extension into the
power stand. (Be sure to
fully insert the extension into
the power stand socket to
assure stability and a good
connection)
Amplifier controls
The amplifier has a combination of controls and
connectors to ensure the most versatile loudspeaker
system.
ZL-10AT amplifier panel
1. LINE/MIC INPUT
These balanced inputs accept a standard XLR (female) connector and a 1/4“ TRS phone jack
connector. A range of signals from microphones, audio mixing consoles, and electronic musical
instruments may be connected here. The sensitivity of this input is controlled by the LINE/MIC
SWITCH. This input does not provide phantom power.
2. LINE/MIC SWITCH
The selector must be in the "MIC" position for MIC inputs. The MIC setting should only be used
if a microphone is connected directly to the in MIC/LINE input.
CAUTION: Using the MIC setting for other purposes may introduce distortion. The LINE setting
should be used for most other audio inputs.
3. INPUT LEVEL KNOB
Sets the input sensitivity which controls the signal level sent to the amplifier and the mix out.
4. MP3 LEVEL KNOB
Turn this knob to adjust the input volume of USB flash or Bluetooth input.
5. MIX OUT
Output XLR is a mix of MIC/line channel, AUX IN channel and MP3 player. Produces a line- level
output signal that is Post Gain. Any adjustments made to the gain of these knobs will affect this
output signal. It works as signal output to link the other active speaker.
6. AUX IN
Connect your digital media player, smart phone, or other audio device with the 3.5mm connec-
tor(included) to this stereo auxiliary input. Input level will be controlled by AUX LEVEL.
7. AUX LEVEL
Sets the sensitivity of AUX IN input which controls the signal level sent to the amplifier and the
mix out.
8. BASS
Increases or decrease the Low frequency for MIC/LINE/AUX/MP3 sources at a range between
-10dB to +10dB.
9. MID
Increases or decreases the middle frequency for MIC/LINE/AUX/MP3 sources at a range
between -10dB to +10dB.
10. TREBLE
Increases or decreases the high frequency for MIC/LINE/AUX/MP3 sources at a range between
-10dB to +10dB.
11. MASTER
Adjusts the master volume of all inputs. (The mix out will not be controlled by this knob.)
12. POWER LED (BLUE)
Will illuminate when power is applied to the unit and the ON/OFF switch is in the ON position.
13. LIMIT INDICATOR (RED)
This LIMIT LED illuminates when the output power is in overload. The red clip LED indicates that
limiting has taken place to protect and avoid damage to the amplifier or loud-speaker.
Continuously over driving the system will cause distortion and may lead to premature failure to
the speaker system. If the limit LED indicator flashes, turn down the MASTER knob.
14. MEDIA PLAYER.
MP3 or TWS control here.
15. AC INPUT
Standard IEC AC line input connector. 230V/5A AC fuse.
16. POWER SWITCH
Enables the AC power to the unit (on/off)
17. LED LIGHTS SWITCH
Enables front LED lights (on/off)
18. VOLTAGE SELECTOR
Allows user selection of different local voltage ratings 115V/60Hz - 230V/50Hz.
2. Align the
loudspeaker array
and push it firmly
in place.
Slip
Slip to
connection
3

1. LINE/MIC INPUT
These balanced inputs accept a standard XLR (female) connector and a 1/4“ TRS phone jack
connector. A range of signals from microphones, audio mixing consoles, and electronic musical
instruments may be connected here. The sensitivity of this input is controlled by the LINE/MIC
SWITCH. This input does not provide phantom power.
2. LINE/MIC SWITCH
The selector must be in the "MIC" position for MIC inputs. The MIC setting should only be used
if a microphone is connected directly to the in MIC/LINE input.
CAUTION: Using the MIC setting for other purposes may introduce distortion. The LINE setting
should be used for most other audio inputs.
3. INPUT LEVEL KNOB
Sets the input sensitivity which controls the signal level sent to the amplifier and the mix out.
4. MP3 LEVEL KNOB
Turn this knob to adjust the input volume of USB flash or Bluetooth input.
5. MIX OUT
Output XLR is a mix of MIC/line channel, AUX IN channel and MP3 player. Produces a line- level
output signal that is Post Gain. Any adjustments made to the gain of these knobs will affect this
output signal. It works as signal output to link the other active speaker.
6. AUX IN
Connect your digital media player, smart phone, or other audio device with the 3.5mm connec-
tor(included) to this stereo auxiliary input. Input level will be controlled by AUX LEVEL.
7. AUX LEVEL
Sets the sensitivity of AUX IN input which controls the signal level sent to the amplifier and the
mix out.
8. BASS
Increases or decrease the Low frequency for MIC/LINE/AUX/MP3 sources at a range between
-10dB to +10dB.
9. MID
Increases or decreases the middle frequency for MIC/LINE/AUX/MP3 sources at a range
between -10dB to +10dB.
10. TREBLE
Increases or decreases the high frequency for MIC/LINE/AUX/MP3 sources at a range between
-10dB to +10dB.
11. MASTER
Adjusts the master volume of all inputs. (The mix out will not be controlled by this knob.)
12. POWER LED (BLUE)
Will illuminate when power is applied to the unit and the ON/OFF switch is in the ON position.
13. LIMIT INDICATOR (RED)
This LIMIT LED illuminates when the output power is in overload. The red clip LED indicates that
limiting has taken place to protect and avoid damage to the amplifier or loud-speaker.
Continuously over driving the system will cause distortion and may lead to premature failure to
the speaker system. If the limit LED indicator flashes, turn down the MASTER knob.
14. MEDIA PLAYER.
MP3 or TWS control here.
15. AC INPUT
Standard IEC AC line input connector. 230V/5A AC fuse.
16. POWER SWITCH
Enables the AC power to the unit (on/off)
17. LED LIGHTS SWITCH
Enables front LED lights (on/off)
18. VOLTAGE SELECTOR
Allows user selection of different local voltage ratings 115V/60Hz - 230V/50Hz.
Powered by:
4

MEDIA PLAYER
1. LINE/MIC INPUT
These balanced inputs accept a standard XLR (female) connector and a 1/4“ TRS phone jack
connector. A range of signals from microphones, audio mixing consoles, and electronic musical
instruments may be connected here. The sensitivity of this input is controlled by the LINE/MIC
SWITCH. This input does not provide phantom power.
2. LINE/MIC SWITCH
The selector must be in the "MIC" position for MIC inputs. The MIC setting should only be used
if a microphone is connected directly to the in MIC/LINE input.
CAUTION: Using the MIC setting for other purposes may introduce distortion. The LINE setting
should be used for most other audio inputs.
3. INPUT LEVEL KNOB
Sets the input sensitivity which controls the signal level sent to the amplifier and the mix out.
4. MP3 LEVEL KNOB
Turn this knob to adjust the input volume of USB flash or Bluetooth input.
5. MIX OUT
Output XLR is a mix of MIC/line channel, AUX IN channel and MP3 player. Produces a line- level
output signal that is Post Gain. Any adjustments made to the gain of these knobs will affect this
output signal. It works as signal output to link the other active speaker.
6. AUX IN
Connect your digital media player, smart phone, or other audio device with the 3.5mm connec-
tor(included) to this stereo auxiliary input. Input level will be controlled by AUX LEVEL.
7. AUX LEVEL
Sets the sensitivity of AUX IN input which controls the signal level sent to the amplifier and the
mix out.
8. BASS
Increases or decrease the Low frequency for MIC/LINE/AUX/MP3 sources at a range between
-10dB to +10dB.
9. MID
Increases or decreases the middle frequency for MIC/LINE/AUX/MP3 sources at a range
between -10dB to +10dB.
10. TREBLE
Increases or decreases the high frequency for MIC/LINE/AUX/MP3 sources at a range between
-10dB to +10dB.
11. MASTER
Adjusts the master volume of all inputs. (The mix out will not be controlled by this knob.)
12. POWER LED (BLUE)
Will illuminate when power is applied to the unit and the ON/OFF switch is in the ON position.
13. LIMIT INDICATOR (RED)
This LIMIT LED illuminates when the output power is in overload. The red clip LED indicates that
limiting has taken place to protect and avoid damage to the amplifier or loud-speaker.
Continuously over driving the system will cause distortion and may lead to premature failure to
the speaker system. If the limit LED indicator flashes, turn down the MASTER knob.
14. MEDIA PLAYER.
MP3 or TWS control here.
15. AC INPUT
Standard IEC AC line input connector. 230V/5A AC fuse.
16. POWER SWITCH
Enables the AC power to the unit (on/off)
17. LED LIGHTS SWITCH
Enables front LED lights (on/off)
18. VOLTAGE SELECTOR
Allows user selection of different local voltage ratings 115V/60Hz - 230V/50Hz.
18. USB PORT
Connect your USB flash drive here to play music
19. LCD DISPLAY
Display the media panel modes for USB & Bluetooth
20. PREVIOUS
Press this button to play the previous song
21. MODE
Press this button to switch USB or Bluetooth mode
22. PLAY/PAUSE
Plays or pauses the USB or Bluetooth media panel source
23. FOLDER
Press this button to select your MP3 files in USB flash drive
24. NEXT
Press this button to play the next song
5

1. LINE/MIC INPUT
These balanced inputs accept a standard XLR (female) connector and a 1/4“ TRS phone jack
connector. A range of signals from microphones, audio mixing consoles, and electronic musical
instruments may be connected here. The sensitivity of this input is controlled by the LINE/MIC
SWITCH. This input does not provide phantom power.
2. LINE/MIC SWITCH
The selector must be in the "MIC" position for MIC inputs. The MIC setting should only be used
if a microphone is connected directly to the in MIC/LINE input.
CAUTION: Using the MIC setting for other purposes may introduce distortion. The LINE setting
should be used for most other audio inputs.
3. INPUT LEVEL KNOB
Sets the input sensitivity which controls the signal level sent to the amplifier and the mix out.
4. MP3 LEVEL KNOB
Turn this knob to adjust the input volume of USB flash or Bluetooth input.
5. MIX OUT
Output XLR is a mix of MIC/line channel, AUX IN channel and MP3 player. Produces a line- level
output signal that is Post Gain. Any adjustments made to the gain of these knobs will affect this
output signal. It works as signal output to link the other active speaker.
6. AUX IN
Connect your digital media player, smart phone, or other audio device with the 3.5mm connec-
tor(included) to this stereo auxiliary input. Input level will be controlled by AUX LEVEL.
7. AUX LEVEL
Sets the sensitivity of AUX IN input which controls the signal level sent to the amplifier and the
mix out.
8. BASS
Increases or decrease the Low frequency for MIC/LINE/AUX/MP3 sources at a range between
-10dB to +10dB.
9. MID
Increases or decreases the middle frequency for MIC/LINE/AUX/MP3 sources at a range
between -10dB to +10dB.
10. TREBLE
Increases or decreases the high frequency for MIC/LINE/AUX/MP3 sources at a range between
-10dB to +10dB.
11. MASTER
Adjusts the master volume of all inputs. (The mix out will not be controlled by this knob.)
12. POWER LED (BLUE)
Will illuminate when power is applied to the unit and the ON/OFF switch is in the ON position.
13. LIMIT INDICATOR (RED)
This LIMIT LED illuminates when the output power is in overload. The red clip LED indicates that
limiting has taken place to protect and avoid damage to the amplifier or loud-speaker.
Continuously over driving the system will cause distortion and may lead to premature failure to
the speaker system. If the limit LED indicator flashes, turn down the MASTER knob.
14. MEDIA PLAYER.
MP3 or TWS control here.
15. AC INPUT
Standard IEC AC line input connector. 230V/5A AC fuse.
16. POWER SWITCH
Enables the AC power to the unit (on/off)
17. LED LIGHTS SWITCH
Enables front LED lights (on/off)
18. VOLTAGE SELECTOR
Allows user selection of different local voltage ratings 115V/60Hz - 230V/50Hz.
TWS MODE
1. Turn OFF both speakers.
2. Access Bluetooth application on the phone, and select “forget” or “remove”
ZL-10AT from the phone, so it won’t interfere with TWS connection, you will
reconnect to it after.
3. Turn on both speakers and press MODE button until you reach BLUETOOTH
mode on both speakers.
4. Choose which speaker you want as the master (The master speaker is the one
who will control the music). Press “Play” button for 3 seconds and release.
5. You will see one speaker says MASTER and the other SLAVE
6. Insert USB or connect the phone via Bluetooth to “ZL-10AT” to the
MASTER speaker
7. Be sure to stream the music to the master device. If it is not working, you may
have connected to the slave. Insert USB or connect to the other speaker.
8. To disconnect pairing, press and hold PLAY button for 3 seconds.
Powered by:
Bluetooth
mode
TWS
6

Set-up option
1. Turn ON the speaker.
2. Insert USB and play music.
3. Press and hold the PLAY button for 5 seconds
until the MUTE icon is show on the screen.
4. Press any button on the LDC1.2 remote until
the MUTE icon on the speaker screen desapear.
LOUDSPEAKER
ARRAY
LOUDSPEAKER
ARRAY
RGB LIGHT
EXTENSION
LDC1.2
Long Distance Remote
LDC1.2 Long Distance Remote sold separately.
7
01:00/03:16
0008
0008 NOR 160
MP3
A

Smaller audiences Larger audiences
Powered by:
• INTIMATE ACOUSTIC
PERFORMANCES
• MUSIC PLAYBACK
• PRESENTATIONS
• SPEECHES
• MUSICAL PERFORMANCES -
AUDITORIUM / COFFEE HOUSE
• DJ EVENTS
• ANNOUNCEMENTS - LARGE SPACES
8

DIMENSIONS
ZL-10AT
9.2cm
35cm 45.7cm
18.5”
13.7”
3.6”
75cm
29.5”
46cm
18”
9cm
3.5”
149.5cm
58.8”
196cm
77”
9

Powered by:
SPECIFICATIONS
ZL10at
10
SYSTEM:
System Type: Self Powered Tower, 3-way, 10" Bass-Reflex Loudspeaker
SPL Sensitivity：95 dB
Maximum SPL Output: 124 dB
Frequency Range (-10 dB): 60Hz – 18kHz
Frequency Response (-3 dB): 70Hz – 17kHz
AMPLIFIER:
System Power Rating: 250W Continuous (RMS) (150W LF + 100W HF)
500W Music Program (300W LF + 200W HF)
1000W Peak
Type: Class D with Copper Teroidal Power Supply
Input Impedance: 20k (Balanced)
Line Input Gain: Infinity to +4 dBu
Mic Input Gain: Infinity to +6 dBu
Aux Input Gain: Infinity to +4 dBu
Maximum Input Level: Line: +4dBu / Mic: -20dBu / Aux: +4dBu
Equalizer: 3 Band Graphic EQ (Bass: 120hz +/- 6dB) (Mid: 1200hz +/- 6dB)
(Treble: 10Khz +/- 6dB)
Connectors: 1 x XLR-1/4” Combo Inputs; Mic/Line Selector 1 x 3.5mm Stereo Jack input
1 x XLR Mixed Output
LED Indicators: Front Power LED (White) Rear Power LED (Blue) Rear Clip LED (Red)
LED Sound Bar: Digital type RGB LED with standby rainbow function and sound meter
function (switchable On/Off)
Cooling: Passive
AC Power Input: 100-120VAC 50/60Hz; 230-240VAC 50/60Hz
AC Power Consumption (120V~): Full Power – 2.5A (Max)
SPEAKER:
LF Driver: 1 x PRO-Z10 (10”) Woofer with 2” Voice Coil, Pure Copper Wire Coil, 50 oz
Ferrite Magnet, Paper Cone
MF Driver: 6 x PRO-Z3 (3") Mid-Range 0.75” Voice Coil, Pure Copper Wire Coil, 5 oz
Ferrite Magnet, Paper Cone
HF Driver: 2 x PRO-TW1SN (1") Soft Dome Tweeter, N38H Neodymium Magnet, Silk &
Titanium Diaphragm, 1" Kapton Voice Coil
Coverage Pattern: 110 x 20 degrees
Crossover Frequency: 2kHz
ENCLOSURE:
Material: Polypropylene, Black
Handles: 1
Grille: Perforated Steel with Acoustically Transparent Black Cloth Backing
Dimensions (L x W x H): 46cm x 35 cm x 196 cm
18” x 18.5” x 77”
Weight: Total: 18.8 kg / 41.4 lb Subwoofer Box: 14.2 Kg / 31.3 lb
Speaker Tower: 4.6 Kg / 10.1 lb

Powered by:
For more information about our products,
Please visit our website
www.zumba.com • www.ds18.com
Zumba®, Zumba Loud™ and the Zumba logos are trademarks of Zumba Fitness, LLC, used under license.
Self Powered, 3-Way tower Loudspeaker
ZL10at
USER MANUAL