ZY International TK-106A User manual

GSM/GPRS/GPS Vehicle Tracker
ModelA/B User Manual
Preface
Thank you for purchasing the tracker. This manual shows how to operate the device
smoothly and correctly. Make sure to read this manual carefully before using this
product. Please note that specification and information are subject to changes without
prior notice in this manual. Any change will be integrated in the latest release. The
manufacturer assumes no responsibility for any errors or omissions in this document.
Contents

1. Function Introduction.............................................................................................................4
2. Applications...........................................................................................................................5
3. Hardware Description ............................................................................................................5
4. Accessories............................................................................................................................5
5. Specifications ........................................................................................................................7
6. Operating Instructions............................................................................................................7
6.1. Terminal Installation ....................................................................................................7
6.2 Installation wiring diagram ...........................................................................................8
6.2.1 Main unit installation wiring diagram..................................................................8
6.2.2 Relay box (JD01) wiring diagram .......................................................................9
6.2.3 Central locking system wiring diagram ...............................................................9
6.3. SIM card installation....................................................................................................9
7. Function and Operation ........................................................................................................10
7.1 Turn on device............................................................................................................10
7.2 GSM/GPS LED Indicator ...........................................................................................10
7.3 Alarming LED indicator..............................................................................................10
7.4 Initialization ............................................................................................................... 11
7.5 Change Password ....................................................................................................... 11
7.6 Authorization.............................................................................................................. 11
7.7 Modes switch “track”, “monitor” ................................................................................ 11
7.8 Single Locating ..........................................................................................................12
7.9 Auto track continuously ..............................................................................................12
7.10. Automatic update positions of vehicle turns ..............................................................13
7.11. GPS drift suppression...............................................................................................13
7.12 Absolute street address by SMS.................................................................................13
7.13 Location based service (LBS)....................................................................................14
7.14 .View photos on cell phone .......................................................................................14
7.15 Data logging.............................................................................................................14
7.15.1 Auto logging ..................................................................................................14
7.15.2 Logging upon times........................................................................................14
7.15.3 Multi-logging................................................................................................. 15
7.15.4 Logging Clearance: ........................................................................................15
7.16 Data Load.................................................................................................................15
7.17 .Forward the third parties’ message............................................................................15
7.18 Charges Inquiry ........................................................................................................15
7.19. ACC working alarm.................................................................................................15
7.20. Remote Controller (Optional)...................................................................................16
7.20.1. Program the Remote Controller......................................................................16
7.20.2. Setting for Button SOS/Remote Start Function ...............................................17
7.21. Switch between Electric and Vapor lock: ..................................................................17
7.22. Silent Mode .............................................................................................................17
7.23. ARM / LOCK ( All the functions of Lock and Unlock must work with the optional relay
box of central locking system) .......................................................................................... 17
7.23.1 ARM / LOCK BY SMS ..................................................................................17

7.23.2 ARM / LOCK by Remote controller................................................................18
7.24. Disarm ....................................................................................................................18
7.24.1 Disarm by SMS..............................................................................................18
7.24.2 Disarm by Remote Controller .........................................................................18
7.24.3Alarm Pause....................................................................................................18
7.25 Find Vehicle via Remote Controller...........................................................................18
7.26. Remote Boot Release...............................................................................................19
7.27. Alerts Function ........................................................................................................19
7.27.1 SOS Emergency Alarm...................................................................................19
7.27.2 Geo-fence.......................................................................................................19
7.27.3. Multi-area management .................................................................................20
7.27.4 Movement Alarm............................................................................................20
7.27.5 Over Speed Alarm ..........................................................................................21
7.27.6 Fuel Checking Alerts (Optional)......................................................................21
7.27.7 Temperature Checking Alerts (Optional)..........................................................21
7.27.8. Low battery alarm .........................................................................................22
7.27.9 Power off alarm..............................................................................................22
7.27.10. GPS Blind Spot Alert...................................................................................22
7.27.11 Accident Alarm (Optional) ............................................................................23
7.28. Alarms under Arm State ...........................................................................................23
7.28.1 Door Open Alarm...........................................................................................23
7.28.2 Bonnet alerts ..................................................................................................23
7.28.3 Footbrake Alarm.............................................................................................23
7.28.4 Acc Alarm......................................................................................................24
7.28.5 Shock Sensor Alarm (Option) .........................................................................24
7.29 Auto Photograph (Option) .........................................................................................24
7.30 Alarms in GSM Blind Area .......................................................................................24
7.31 Trigger Memory .......................................................................................................24
7.32 No GSM Alarm ........................................................................................................25
7.33 Cut off oil and power system.....................................................................................25
7.34 Resume the Oil and Power System ............................................................................25
7.35 Auto-arming.............................................................................................................25
7.36 Door closing remind .................................................................................................25
7.37 Park warning ............................................................................................................26
7.38 Automatic Central Locking System ...........................................................................26
7.39 Setup Appointment (Option) .....................................................................................26
7.39.1 Car Type Setting.............................................................................................26
7.39.2 Operations of MT Vehicle setup appointment ..................................................26
7.39.3 Appointment Fail............................................................................................26
7.39.4 Cancel startup appointment.............................................................................27
7.40 Start/turn off car remotely .........................................................................................27
7.41 Empty / Loaded ........................................................................................................27
7.42 Check the Vehicle State.............................................................................................27
7.43 Reset by SMS...........................................................................................................28

7.44 Sleep Mode ..............................................................................................................28
7.45 Check IMEI..............................................................................................................28
7.46 Terminal (local) Time Setting....................................................................................28
7.47 TCP/UDP switch ......................................................................................................29
7.48 Configure parameters by USB...................................................................................29
7.49 GPRS Setting ...........................................................................................................29
7.49.1 Configure APN...............................................................................................29
7.49.2 Configure GPRS User Name and password .....................................................30
7.49.3 Configure IP and Port.....................................................................................30
7.50. Less GPRS traffic ....................................................................................................30
7.51. Modes Switch between “SMS” and “GPRS”............................................................. 31
7.52 Set up monitor center number....................................................................................31
7.53 Web platform and PC installation tracking software ...................................................31
8. Cautions ..............................................................................................................................32
9. Faults & the Solutions ......................................................................................................32
1. Function Introduction
1.1 This tracker is a new product based on the GSM / GPRS network and GPS
satellite positioning system, which set multiple functions of security, monitoring
surveillance, tracking and dispatch management in its entirety. It can track and
monitor remote target by SMS or internet.
1.2 Features
1.2.1 GPS/LBS (location based service) double way tracking solution.
1.2.2 SMS/GPRS/Internet Network data transmission.
1.2.3 GPRS on-line and GPRS re-connected automatically if GPRS drops.
1.2.4 SMS / GPRS dual-mode switching
1.2.5 Configure by remote terminal.
1.2.6 Remote control vehicle
1.2.7 Central locking system
1.2.8 Voice monitor
1.2.9 Photo Snapshot automatically upon alarm trigger and view photo by cell
phone or web server
1.2.10 Fuel level measurement, Oil leakage or theft alarm.
1.2.11 Temperature detection.
1.2.12 Support SD card to memorize positions.

2. Applications
Used widely for positioning and tracking vehicle and other moving objects.
3. Hardware Description
（JP1）16PIN harness port
（JP2）8PIN harness port
（JP3）Camera port
（JP4）4PIN harness port
4. Accessories
No.
Picture
Name
Note
1
GPS Antenna
3 meters
2
GSM Antenna
2 meters
Internal
SIM2 slot

3
Microphone
1.5meters
4
Harness
16PIN
5
Harness
4PIN
6
Relay
12V/40A
7
Shock Sensor
Optional
8
Siren
Optional
9
Remote controller
Optional
10
Central locking relay box
（JD01）
Optional
11
Camera
Optional
12
Temperature Sensor
Optional

13
Fuel Sensor
Optional
5. Specifications
Content
Specification
DIM
92*71*26mm
Weight
170g
Network
GSM/GPRS
Band
850/900/1800/1900Mhz
GPS Module
SIRF3 chip
GPS
Sensitivity
-159dBm
GPSAccuracy
5m
GPS Start
Time
Cold status 45s
Warm status 35s
Hot status 1s
Applicable
vehicle power
12 V/24V
Backup
Battery
Chargeable changeable 3.7V 500mAh Li-ion battery
Storage Temp
-40°C to +85°C
Operation
Temp
-20°C to +65°C
Humidity
5%--95% non-condensing
6. Operating Instructions
6.1. Terminal Installation
6.1.1 Please ask the qualified engineers to install.
6.1.2 Do not install it in an environment which is over GSM &GPS performance and
fix the antennas in a position with good signals.
6.1.3 Pay attention to make installation location preventing water and dust.
6.1.4 Find the harness and insert them into the corresponding holes of the products,
and connect the wires with the original car circuit showing below

6.1.5 Knowing about the type of the door trigger is positive or negative. Please
connect the green wire to the door control circuit if it is positive, and connect blue
wire if it is negative.
6.1.6 Electric lock is set default central lock. If vehicle central lock is vapor lock,
refer to 7.21. Switch between Electric and Vapor lock
6.1.7 Fuel sensor diagram instructions: Refer to the fuel sensor installation
instructions.
6.1.8 Connect the GPS and GSM antenna to the right connector, and find an
appropriate place to fix the antennas to make sure good reception.
6.2 Installation wiring diagram
6.2.1 Main unit installation wiring diagram
*Orange with black wire of JP1: Engine status detection, it is used to detect the engine
started or not after automatically start command, this wire connects to the power wire
of fuel pump(for gasoline vehicle) or output wire of generator (for diesel vehicle), and
it has 9V-14V voltage after engine started.

6.2.2 Relay box (JD01) wiring diagram
6.2.3 Central locking system wiring diagram
6.3. SIM card installation
6.3.1 Use a tweezers or a sharp thing to touch the SIM CARD popup switch, the SIM

CARD slot will pop up, take out the SIM card slot to load the SIM card, and then put
the SIM card slot back to its original position after confirm the SIM card in the right
place.
6.3.2 Installing the second internal SIM card need open the case
6.3.3 Please make sure that the SIM card is GSM network and able to execute the
function of incoming calls display, no calls can be diverted and the PIN code is locked.
The SMS format must be TXT format, and can’t recognize the PDU format.
6.3.4 If need to save historical positions or positions when GSM not available, please
insert SD card to its slot
7. Function and Operation
7.1 Turn on device
7.1.1 Connect the positive and negative wire, red and black ones, with 12V or 24V car
power system, wait for 1 minute after connecting power to wait tracker works normal,
and then turn on the backup battery switch
7.2 GSM/GPS LED Indicator
LED color
Behavior
Descriptions
Red
NO
No GSM signal
Red
one time per second (fast)
GSM signal normal and work under GSM mode
Red
one time per 3 seconds (slow)
GPRS mode
Green
Quick flash
GPS signal normal
Green
OFF
No GPS signal
Red &
Green
Flash three times alternately
Detect microSD card
7.3 Alarming LED indicator
State
LED Behavior
Non-armed state
flash once, stop for 3 seconds……
Armed state
flash 2 times, stop for 1 second……
After alarm being triggered
light for 2 seconds, stop for 2 seconds……
Disarming after being triggered
light for 3 seconds.
After SOS being triggered
flash 3 times in 5 seconds.

7.4 Initialization
Send SMS “begin+password” to the unit, it will reply “begin OK” and initialize
all the settings to default factory settings.（default password: 123456）
For example: Send SMS “begin123456”, it will reply “begin ok”. (No quotation
marks “”when sending all the SMS)
7.5 Change Password
7.5.1 Send SMS “ password+old password+space+new password” to the unit to
change the password.
For example: send SMS “password123456 888888” to the unit. If
succeeded, “Password ok” will reply to your cell phone.
7.5.2 Keep the new password in mind, the machine will not work properly if lost
the password.
7.5.3 Note: The new password must be 6 digits of the Arabic numerals, or the
device will not recognize.
7.5.4 Please don’t type “+” character in all commands, space means press the space
keyboard on cell phone.
7.6 Authorization
There are 5 numbers to be allowed to authorize in the tracker at most.
7.6.1 Call and track the tracker device for 10 times from cell phone in success, it
will make the cell phone number as the authorized number automatically, and
reply “add master ok”.
7.6.2 Authorization: Send SMS “admin+password+space+cell phone number” to
set up an authorized number, the other authorized numbers should be set by
the first authorized number, if the number is successfully authorized, the unit
will reply “admin ok” by SMS.
7.6.3 Delete authorization: Send SMS“ noadmin+password+space+authorized
number” to delete the authorized number.
7.6.4 If you want to track the target via tracker device when it enters into another
country, you must add the country code before the cell phone number, for
example, send SMS“admin123456 008613322221111” to the device. Note:
13322221111 will be set up as the authorized number.
7.7 Modes switch “track”, “monitor”
7.7.1 The default mode is “track” (track mode).
7.7.2 Send SMS command "monitor+password" to tracker device, it will reply "

monitor ok!" and switch to monitor mode, and then call the number in device to
monitor the voice.
7.7.3 Send SMS command "tracker+password" to tracker device, It will reply "tracker
ok" and restore to track mode.
7.8 Single Locating
7.8.1 Any number calls the tracker device, it will reply a SMS including the
position of latitude and longitude if authorized number has not been set yet. If
authorized number has been set successfully, the device won’t reply SMS
including the positioning of latitude and longitude when the unauthorized number
dials it up.
7.8.2 Dialing the tracker device from the authorized number, it will hang up your
calling and respond to a real-time latitude and longitude information as
following:
Tracking location, when no GPS signal, the SMS includes the last valid
latitude & longitude as well as the LAC code of current position, the LAC
code can be input in the column of “manual track” menu of web platform
to check location.
7.9 Auto track continuously
7.9.1 Track with limited times upon time interval:
Send SMS command “fix030s005n +password” to the tracker device, it will report the
latitude & longitude at 30s intervals of 5 times. (s:second, m:minute, h:hour). This
command set must be in 3 digits and the maximum value is 255.

7.9.2 Track with unlimited times upon time interval:
Send SMS “fix030s***n+password” to the tracker device, it will reply the latitude &
longitude continuously at interval of 30 seconds.
Note: the interval must not less than 20s.
7.9.3 Smart track upon time and distance interval:
7.9.3.1 Please set "track with unlimited times upon time interval" before this function,
and send "distance+password+space+distance", tracker will reply "Distance ok", and
then tracker will locate upon both the pre-set time and distance.
E.G: Send "distance123456 0050", it means distance is 50 meters; the number must
be 4 digits Arabic numbers.
7.9.3.2 Set this function on web server: Set time interval first and then distance
interval, tracker will locate upon the time and distance.
7.9.4 Cancel: Send SMS “nofix+password” to the tracker device to cancel the “auto
track”.
7.10. Automatic update positions of vehicle turns
7.10.1 The tracker will update the positions automatically to web server once the vehicle changing
driving direction over pre set angle value to form a smooth trajectory consistent with the
actual road, this function works only in GPRS mode.
7.10.2 Send "angle+password+space+angle" to tracker, it will reply" angle ok".
7.10.3 The angle must be 3 digits Arabic numbers, default angle value is 30 degree.
7.11. GPS drift suppression
7.11.1 This function is deactivated as default, send "suppress+password" to tracker, it will reply"
suppress drift ok". The GPS data stop updating if vehicle is not driving (ACC is OFF) and
latitude and longitude always keep same, and GPS data updates automatically when vehicle
is moving.
7.11.2 Cancel: send "nosuppress+password" to tracker, it will reply" nosuppress ok ".
7.12 Absolute street address by SMS
7.12.1 You must set up the APN of your local GSM network for the SIM card in tracker first
before using this function, if there is user name and password for GPRS login, Please
refer to configure the APN, user name and password for GPRS login.
7.12.2 After configure the APN, send "address+password" to device, it will reply SMS including
real street/address name. For example: No.8, Guankou 2nd Rd, Nantou, Nanshan district,
Shenzhen, Guangdong, china.

7.13 Location based service (LBS)
When the tracker device doesn’t received valid GPS signals, tracker will positioning by
location based service(LBS), the messages includes the GPS coordinates of the last
position in SMS mode, but the LAC in message is the current new position,you can also
send command “address+password” to tracker to get the newest absolute address and GPS
coordinates as well; tracker will automatically switch to track by location based service in
GPRS mode, and actualized on the map of web server with LBS mark. And there may be
some inaccuracy with actual location by LBS tracking; the bias depends on GSM
reception.
Note: This feature can be used normally in most areas according to the signal of GSM
network. It may not be available in some areas.
7.14 .View photos on cell phone
7.14.1 You must set up the APN of your local GSM network for the SIM card in tracker first
before using this function, if there is user name and password for GPRS login, Please refer to
configure the APN, user name and password for GPRS login.
7.14.2After APN configuration, send “photo+password” to device, it will take photos and send a
link SMS to authorized cell phone. Click the link, then photo can be viewed on cell phone via
Internet
7.15 Data logging
Logging Volume is depends on the capacity of the SD card inserted in the tracker device，the data
in the SD card can viewed after copied to computers through card reader,
7.15.1 Auto logging
When the tracker device lost GSM signals or fall offline from GPRS, tracker will log the tracking
position and alerts automatically in the SD card on the basis of the pre-set condition, when GSM
signals get back, all the event alerts will be auto-sent to the authorized numbers or monitoring
platform (server), but the logged tracking data should be loaded to the monitoring platform via
SMS command.
7.15.2 Logging upon times
Send SMS: “save030s005n+password” to the tracker unit, it will reply “sa ve ok”, and will log the
lat, long locations every 30 seconds for 5 times. (S: second, m: minute; h: hour).

7.15.3 Multi-logging
Send SMS:”save030s***n+password” to tracker device, it will reply “save ok”.
7.15.4 Logging Clearance:
send SMS: “clear+password” to tracker device, it will reply “clear ok”.
7.16 Data Load
7.16.1 Current date Load: Send SMS: “load+ password” to tracker device, it will reply: “load ok”
if the device is working well under GPRS mode; if not, it will reply “load fail! P lease
check gprs” that means device does not work under GPRS mode.
7.16.2 Specified date Load：Send SMS: “load+ password+ space+ year month date” to tracker
device, it will reply: “load ok” and load the tracking data to the monitoring platform upon
the valid time you choose. For Example: send SMS: “load123456 20110425” to the tracker
device, means to load the tracking data of 25th April 2011 to monitoring platform.
7.17 .Forward the third parties’ message
7.17.1 Send SMS "forward+password+space+third parties phone number" from authorized
phone number, tracker will reply"forward ok", and supports 1 third parties phone
numbers at most.
For example, set the phone number of the service provider of the simcard in the
tracker, when charge remind message coming in, tracker will forward it to
authorized phone number.
7.17.2 Cancel: Send SMS command "noforward+password".
7.18 Charges Inquiry
Send SMS command "balance+password+space+carrier’s phone number+space+code" to
tracker, it will forward the code to carrier’s phone number and return the balance message
received from carrier’s phone number.
7.19. ACC working alarm
7.19.1 This function is disabled as default. To active this functions, send

"ACC+password" to tracker, it will reply "ACC ok". And tracker will send "ACC
on+latitude & longitude" to authorized numbers when detect ignition action, that
means the vehicle has been started; and tracker will send “ACC off+latitude &
longitude" to authorized numbers, that means ACC off.
7.19.2 Send "noACC+password" to disabled this function, tracker will reply
"noACC ok".
7.19.3 This configuration can only enable and disable the alarm to authorized
numbers; it will send to web server automatically in GPRS mode and can't be
disabled.
7.20. Remote Controller (Optional)
Button
Function
Description
Arm / lock
Press for 0.5 second, the siren will beep one time.
Deterrence/car
search
Press for 0.5 second when it is in arm state, siren will beep 10
seconds.
Disarm / unlock
Press for 0.5 second, the siren will beep two times.
Remote Boot
Release
Press for 2 seconds, vehicle boot will be open.
SOS/Remote
start
Press for 3 seconds，device will send SOS alarm SMS message
or remote start the car，it can be set by yourself.
7.20.1. Program the Remote Controller
Step on foot brake, short-press the SOS for 7 times, siren beeps 1 time, the turn
light blink 1 time and enter to learning mode.
7.20.1.1 Short-press the button of the first remote controller, the turn light blink
1 time and siren beeps 1 time means the first remote controller programming
successfully.
7.20.1.2 Short-press the button of the second remote controller, the turn light
blink 2 times and siren beeps 1 times means the first remote controller programming
successfully.
7.20.1.3 Release the foot brake, programming is saved and exits automatically.

7.20.2. Setting forButton SOS/Remote Start Function
7.20.2.1 Button default function is SOS
7.20.2.2 Send SMS command“startkey+password+ start”to tracker, it will reply
“startkey start ok!”,long-press the remote start will be trigger.
7.20.2.3 Send SMS command“startkey+password+ sos”to tracker, it will reply
“startkey start ok!”,long-press the SOS will be trigger.
7.21. Switch between Electric and Vapor lock:
Send SMS command “locktype+password+space+1” to the tracker, it will
reply“Vapor lock ok!”
Tracker device will switch to Vapor lock.
Send SMS command “locktype+password+space+0” to the tracker, it will
reply“Electric lock ok!”
Tracker device will switch to electric lock.
7.22. Silent Mode
Send SMS “silent+password” to tracker device, it will reply “silent ok!” .It means
tracker device enters into silent mode, no action from siren after alarm is triggered,
but tracker will send alarm SMS to authorized numbers.
Quit silent mode Send SMS “loud+password” to tracker device.
7.23. ARM / LOCK ( All the functions of Lock and Unlock
must work with the optional relay box of central locking
system)
7.23.1 ARM / LOCK BY SMS
Send “arm+password” to tracker, it will make the car enter ARM states and lock the door at the
same time, and reply “Tracker is activated”.If the car is in ignition (ACC is at “ON” position),
then the car can’t enter ARM state, but it will lock the door and reply “set up fail! pls turn off

ACC”.If engine turned off, but door is open, then the car can’t enter ARM state and reply “set up
fail! pls close the door”
7.23.2 ARM / LOCK by Remote controller
In disarm states, short-press remote control button ,the door of the vehicle will
lock, it enter sound and light arm states, siren beeps one time, turn light blink one
time, no SMS message.
If the car is in ignition (ACC is at “ON” position), then the car can’t enter ARM state,
but it will lock the door and siren keep silent.If door is not close, siren beeps 3 times
with turn light blink.
7.24. Disarm
7.24.1 Disarm by SMS
Send SMS command "disarm+password" to the tracker device in the vehicle, It
will reply “Tracker is deactivated” in both armed and disarmed state, and the SMS
command will make the tracker device enter into disarmed state if the unit
currently armed.
It won’t alarm if the door is open and sensor is vibrated and the engine is started
when deactivated this arm function.
7.24.2 Disarm by Remote Controller
In armed state, short-press button ，the car enters into disarm state, siren will beep
two times and turn light blink two times.
7.24.3Alarm Pause
When alarm is triggered, press button ,it will stop alarm and turn off the turn
light, but the alarm system still in warning states, no action for lock/unlock the
door.
7.25 Find Vehicle via Remote Controller
In armed state, short-press button 1 time, siren will beep 10 seconds with turn light flashing,

press any button to stop.
7.26. Remote Boot Release
Long-press button for 2 seconds in disarm state, vehicle boot will be open.
7.27. Alerts Function
7.27.1 SOS EmergencyAlarm
7.27.1.1 SOS via Remote Controller
Press button for 3 seconds; siren will not beep and turn light will not flash, the
tracker device will send SMS “help me!+lat./long.” to all the authorized
numbers at interval of 3 minutes. It will stop sending such a SMS when any
authorized number reply SMS “help me!” to the tracker.
7.27.1.2 SOS via SOS Button
Long-press SOS button on the cables for 2 seconds, the device will send sms:
“help me + lat/long” to every
authorized no. without any action from siren or turn light. Alerts will stop after
you reply
sms: “help me!” to the device by any authorized no.
7.27.2 Geo-fence
Set up a geo-fence for the tracker device to restrict its movements within a district.
The unit will send SMS to the authorized numbers when it goes out of this district.
Set up: When the tracker stays immobile in a place for 3-10 minutes, the user can
send SMS “stockade+password+space+latitude,longitude;latitude,longitude” to
tracker to set the restricted district. In case of breach, it will send SMS
“stockade!+latitude/longitude.” to the authorized numbers.
Note: The first latitude & longitude is coordinate of the top left corner of the
Geo-fence, while the second latitude & longitude is the coordinate of the bottom
right corner, it will alarm SMS in 3 minutes interval.
Cancel: Send SMS “nostockade+password” to deactivate this function.

7.27.3. Multi-area management
7.27.3.1 Set Area
Send SMS command
"area+password+space+latitude,longitude+space+areaname,distanceM" to
tracker(distance unit: M for meter, K for kilometer), it will reply "area01 ok".
Example: Send "area123456 22.353648,113.543678 school,800M".
Note: 5 areas at most and the distance between two points can't be less than the
total distance in the 2 commands, and different areas can't cover each other.
7.27.3.2 Delete areas
Send SMS command:"noarea+password+space+area name", tracker will
reply:"noarea ok".
7.27.3.3 Rename and set distance
Send SMS command "rename+password+space+old name;new
name,distanceM" to tracker, if name is not repeated and area doesn't cover
others, it will reply "rename ok!" for successful configuration.
Example: Send"rename123456 area01;school,800M", it means the new area
name is "school", and covers area of a radius of 800 meters.
7.27.3.4 Activate multi-area management
Send SMS command "area+password+space+on" to tracker, it will reply "Area
on ok!", when tracker enter the pre set area, it will send SMS "area
name+latitude & longitude" to all the authorized phone number, and send same
SMS when goes out of the area.
7.27.3.5Deactivate Multi-area management
Send SMS command "area+password+space+off" to tracker, it will reply"area
off ok!"
7.27.4 Movement Alarm
7.27.4.1.Set up: when the unit stays immobile in a place for 3-10 minutes with GPS
signal reception, the user can send SMS“move+password+space+0200” to
the tracker (Suppose area of a radius of 200 meters, it supports 4 digits at
most. Unit: Meter). It will reply “move OK”. In case of such a movement
(the default distance is 200m), it will send SMS “Move+ latitude &
longitude” to the authorized numbers at interval of 3 minutes.
7.27.4.2 Cancel: Send SMS “nomove+password” to deactivate the movement alarm.