2-Wire Wireless USB Adapter User manual

Installation Guide
Wireless USB Adapter

5100-000099-000 Rev C

1
Wireless USB Adapter
The Wireless USB Adapter is a wireless networking device that is connected to a
USB port on your computer using a USB cable. Using the Wireless USB Adapter,
you can communicate with one or more computers that are equipped with wireless
adapters. Where a standard Ethernet card requires a cable connection to a hub or
a patch panel, wireless networking provides the same connectivity without the
wires. Expanding or redesigning your network is easy, and unlike cabled Ethernet,
the Wireless USB Adapter allows users to roam throughout the network while
remaining connected to the LAN.
Installation
Follow these steps to install the Wireless USB Adapter:
Step 1 - Install the Wireless USB Adapter.
Step 2 - Add the adapter to your computer and install the drivers.
Step 3 - Reboot your computer so Windows recognizes the adapter.
The following sections give you detailed instructions for completing each step.

2
Installing the Wireless USB Adapter
The supplied USB cable has a different type of USB connector on each end.
Series A connector. The Series A USB connector plugs into the USB
port on your computer.
Series B connector. The Series B USB
connector plugs into the back of your USB
device, such as the port located on the back
of your USB hub.
To install the Wireless USB Adapter, simply connect the
adapter to an available USB port on your computer using
the supplied USB cable.

3
Installing Drivers For Windows 98SE
1. Power on your computer. The Add New
Hardware Wizard opens. Click Next to
continue.
2. When the next window opens, select Search
for a better driver for your device
(Recommended), and click Next.

4
3. Insert the HomePortal Setup Wizard CD into
your CD-ROM drive, uncheck Floppy disk drives,
select the CD-ROM drive checkbox, and click
Next.
4. Windows locates the best driver for your
device. Click Next to continue.

5
5. After the drivers are copied, click Finish.
6. When the System Setting Change window
opens, click Yes to reboot your computer and
complete the installation.

6
Installing Drivers For Windows ME
1. Power on your computer and insert the HomePortal Setup Wizard CD into your
CD-ROM drive.
2. When the Add New Hardware Wizard window
opens, select Automatic search for a better
driver (Recommended), and click Next.

7
3. After the driver files are copied, click Finish.
4. When the System Settings Change window
opens, click Yes to reboot your computer and
complete the installation.

8
Installing Drivers For Windows 2000
1. Power on your computer and insert the HomePortal Setup Wizard CD into your
CD-ROM drive.
2. When the Found New Hardware Wizard
window opens, click Next to continue.

9
3. The next window prompts you to install
device drivers. Select Search for a
suitable driver for my device
(recommended), and click Next.
4. When the Locate Driver Files window
opens, uncheck Floppy disk drives,
select the CD-ROM checkbox, and click
Next.

10
5. When the Driver Files Search Results
window opens, click Next.
6. Click Finish to complete the installation.

11
Installing Drivers For Windows XP
1. Power on your computer and insert the HomePortal Setup Wizard CD into your
CD-ROM drive.
2. When the Found New Hardware Wizard
window opens, select Install the software
automatically (Recommended) and click Next
to continue.

12
3. The driver installs.
4. Click Finish to complete the installation.