2seeU 2CU-X102-AHD User manual

BRIGHTNESS
0~100
FREEZE
D-EFFECT
MIRROR
NEG. IMAGE
MOTION
OFF, ON
PRIV ACY
ENGLISH, C HI N E S E,
GERMANY, F R E N C H ,
ITALIAN, S PA N I S H ,
POLISH , R U SS I A N ,
PORTUGUESE, DUT CH,
TURKISH
LANGUAGE
LIVE DPC
DEFECT
WHITE DPC
BLACK DPC
SETUP
M
E
N
U
OUTDOOR FIXED LENS
AHDIR BULLET CAMERA
OSD TREE
U P
L R
DO W N
OSD settings can be done by using five-way switch
provided in I/O cable.
LENS
MANUAL
DC
SHUTTER
AGC
MODE
IRIS SPEED
AUTO, 1/25, 1/50, FL K,
1/200, 1/400, 1 / 1000,
1/2000, 1/5000, x2, x4, x 6,
x8, x10, x15, x20, x25, x 30
0~15
2 Mega-P ixel
Thank you for your purchase of this product.
Before attempting to connect or operate this
product, please read these instructions completely.
The above drawing is for reference only.
MODEL:
2CU - X102- AHD
EXPOSURE
SENS-UP
D- WDR
DEFOG
DEFAUL T
OFF
AUT O
OFF
AUT O
OFF
ON
OFF
AUT O
LEVEL
FEATURES
1/3” SONY Exmor IMX238 CMOS Progressive Scan Sensor+NVP2431H
2Mega-pixel Resolution (1936*1097) with AHD DVR
Lens: 3.6mm (3 Mega) Fixed Lens
True Day/Night with ICR
BACKLIGHT
BLC AREA
DEFAUL T
SELECT
DISPLAY
Support D-WDR F unction
2D/3D Noise R eduction
Low Exposure Shutter Speed
Support Defog F unction
Min. Illumination up to 0.001Lux@F1.2; 0Lux with IR on
36pcs Oblong IR LED, Max. 90 Feet Night Vision Distance
Support Two Types of Backlight (BLC & HSBLC)
Six Types of White Balance (ATW, A WC
→
SET, INDOOR, OUTDOOR, AWB and
MANUAL)
Four modes of Day/Night (AUTO, COLOR, B/W and EXT)
Support D-EFFECT Function (FREEZE, MIRROR and NEG. IMAGE)
Privacy Mask Zones (4 Areas selectable)
Support Three Types of Defect (Live DPC, White DPC and Black DPC)
Minimum Data Loss (Long Reach up to over 300m)
Reliable & Low Cost Cabling (Coaxial Cables)
IP 66 Housing (W aterproof)
Lose Less Video on Display, No Image Latency Delay
Support Eleven Types of Languages Setting (ENGLISH, CHINESE, GERMAN Y,
FRENCH, ITALIAN, SPANISH, POLISH, RUSSIAN, PORTUGUESE, DUTCH, TURKISH)
Support DC12V±1V Voltage Input
3-Axis Wall Mount Bracket
PA C K AG E C O N T E N T S
1. AHD Camera.......................................................................................................1pcs.
2. Operating Instruction (Manual)............................................................................1pc s.
3. Mounting Template Stick er ..................................................................................1pcs.
4. Screw .................................................................................................................3pcs.
5. Plastic W all Plug ..................................................................................................3pcs.
PRECA UTIONS
1.Do not attempt to disassemble the camera.
2.Handle the camera with care.
3.The installation should be made by qualified service personnel or system installers.
4.Do not use strong or abrasive detergents when cleaning the camera body .
5.Clean the CMOS faceplate with care.
6.Never face the camera towards the sun.
7.Use the camera at temperatures within –10 °C to +50 °C, and humidity below 90 %
RH and the storage temperatures should be within –20 °C to +60 °C and humidity
below 20% to 80 % RH.
8.Please operate the camera within the specified power source ratings. A void
connections during a lightning storm. Otherwise, an electric shock may be caused.
WHITE BAL
D A Y&NIGHT
NR
SPECIAL
ADJUST
EX IT
HSBLC
A TW
A WC
→
SET
INDOOR
OUTDOOR
MANUAL
A WB
AUT O
COLOR
B/W
EXT
2DNR
3DNR
CAM TITLE
RS485
SHARPNESS
MONITOR
LSC
VIDEO OUT
SAVE&END, RESET ,
NOT SA VE
BLACK MASK
LEVEL
MODE
DEFAUL T
BL UE
RED
D
→
N (AGC)
D
→
N (DELA Y)
N → D (AGC)
N → D ( DELAY )
BURST
IR SMART
IR PWM
D
→
N ( DELAY )
N → D ( DELAY )
OFF, LOW, MIDDLE, HIGH
OFF, ON (15 C H ARA C T E R )
CAM ID
ID DISPLAY
BAUDRATE
AUTO, OFF
LCD, CRT
ON, OFF
PAL, NTSC

Model Name
2CU-X102-AHD
System
PAL/NTSC
Image Sensor
1/3” SONY Exmor IMX238 CMOS Progressive Scan Sensor
Scanning System
Progressive Scan
Maximum Image Resolution
1936*1097
Video Image Quality
As high as HD- SDI
Lens T ype
3.6mm (3 Mega) Fixed Lens
S/NRatio
More than 50 dB (AGC OFF)
Analog Output
1280H CVBS
COMET, AHD
Min. Illumination
up to 0.001Lux@F1.2; 0Lux with IR on
Exposure Shutter Speed
AUTO, 1/25, 1/50, FLK, 1/200, 1/400, 1/1000, 1/2000, 1/5000, 1/10000,
1/50000, X2, X4, X6, X8, X10, X15, X20, X25, X30
D-WDR
AUTO, OFF, ON (LEVEL: 0~8)
Defog
OFF, AUTO (GRADATION: 0~2)
Backlight
OFF, BLC, HSBLC (4 AREA)
White Balance
ATW, A WC → SET, INDOOR, OUTDOOR, AWB, MANUAL
Day&Night
AUTO, COLOR, B/W, EXT
DNR
2DNR
OFF, LOW, MIDDLE, HIGH
3DNR
OFF, LOW, MIDDLE, HIGH
RS485
CAM ID
0~255
ID DISPLA Y
OFF, ON
BAUDRA TE
2400, 4800, 9600, 19200, 38400
D-EFFECT
FREEZE, MIRROR, NEG. IMAGE
Privacy Mask
OFF, ON (4 AREA SELECT ABLE)
Defect
LIVE DPC, WHITE DPC, BLACK DPC
SENS-UP
X2, X4, X6, X8, X10, X15, X20, X25, X30
Language
ENGLISH, CHINESE, GERMANY, FRENCH, ITALIAN, SPANISH, POLISH,
RUSSIAN, PORTUGUESE, DUTCH, TURKISH
IR LED
36pcs
IR Range
90 Feet
Operating T emperature
-10°C ~+50°C (14°F ~122°F)
PowerSupply
DC12V±1V
PowerConsumption
71mA/DC12V (DAY); 315mA/DC12V (with IR LED ON)
Dimensions
197.0mm (L) X 86.0mm (W) X 66.0mm (H)
Weight
Approx. 370g
86.0
66.0
C A M E R A C O NN E C T I O N S T E C H N I C A L SP E C I F I C A T I O N S
Polarity Marking
(Center P o s i t i v e )
12 V DC P ower Supply
Connect the 12 Volt DC power using DC Jack. Please make sure the polarity is correct.
Incorrect polarity may cause malfunction and/or damage to the camera.
Video Output Connection
Connect BNC connector with 75 Ohms coaxial cable at Video Out BNC sock et.
Wiring P recautions:
Do not bend the coaxial cable into a curve whose radius is smaller than 10 times the
cable’s diameter .
Never staple the cable even if with circular staples. Otherwise impedance mismatching
will occur .d
I N S T A LL A T I O N O F C A M E R A
Installation Template
DI M E N S I O N S
Unit: mm
MOUNTING TEMPLATE STICKER
The mentioned technical drawing is for Reference only. Actual size of Mounting
Template Sticker is matched with Wall Mount Bracket.
1.Stick Mounting Template Sticker supplied for drilling the mounting hole on the
mounting surface. The unit is intended to be mounted with three #10 screws through
the three outer holes at the base of dome camera.
2.Install the appropriate anchors or threaded fasteners.
197.0
The above mentioned technical drawings are for reference only.
All dimensions are in millimeters and approximate.
90°
CAUTION: Camera supplied with factory set Fixed Focal Lens. Do not change focus, any
attempt to change lens focus may not give correct focus image at Day or Night. Do not
attempt to disassemble the camera. Any attempt to disassemble the camera may
hamper the waterproof ability of the camera.
Print V1.0 Aug. 2K14
0230-00314