2seeU 2CU-Z301-AHD User manual

D N (AGC)
N D (AGC)
SETUP MENU
Thank you for your purchase of this product.
Before attempting to connect or operate this
product, please read these instructions completely.
The above drawing is for reference only.
MODEL:
1/3” SONY Exmor IMX238 CMOS Progressive Scan Sensor+NVP2431H
1.3 Mega-pixel Resolution (1280X960) with AHD DVR
Lens: 2.8~12mm Vari-focal (3 Mega) Lens
True Day/Night with ICR
Support D-WDR Function
2D/3D Noise Reduction
Low Exposure Shutter Speed
Support Defog Function
Min. Illumination up to [email protected]; 0Lux with IR on
30pcs Oblong IR LED, Max. 90 Feet Night Vision Distance
Support Two Types of Backlight (BLC & HSBLC)
Six Types of White Balance (ATW, AWC SET, INDOOR, OUTDOOR, AWB and
MANUAL)
Four modes of Day/Night (AUTO, COLOR, B/W and EXT)
Support D-EFFECT Function (FREEZE, MIRROR and NEG. IMAGE)
Privacy Mask Zones (4 Areas selectable)
Support Three Types of Defect (Live DPC, White DPC and Black DPC)
Minimum Data Loss (Long Reach up to over 300m)
Reliable & Low Cost Cabling (Coaxial Cables)
IP 66 Housing (Waterproof)
Lose Less Video on Display, No Image Latency Delay
Support Eleven Types of Languages Setting (ENGLISH, CHINESE, GERMANY,
FRENCH, ITALIAN, SPANISH, POLISH, RUSSIAN, PORTUGUESE, DUTCH, TURKISH)
Support DC12V±1V Voltage Input
1.Do not attempt to disassemble the camera.
2.Handle the camera with care.
3.The installation should be made by qualified service personnel or system installers.
4.Do not use strong or abrasive detergents when cleaning the camera body.
5.Clean the CMOS faceplate with care.
6.Never face the camera towards the sun.
7.Use the camera at temperatures within –10 °C to +50 °C, and humidity below 90 %
RH and the storage temperatures should be within –20 °C to +60 °C and humidity
below 20% to 80 % RH.
8.Please operate the camera within the specified power source ratings. Avoid
connections during a lightning storm. Otherwise, an electric shock may be caused.
PRECAUTIONS
PACKAGE CONTENTS
1. AHD Camera.......................................................................................................1pcs.
2. Operating Instruction (Manual)............................................................................1pcs.
3. Mounting Template Sticker..................................................................................1pcs.
4. Screw.................................................................................................................4pcs.
5. Plastic Wall Plug..................................................................................................4pcs.
LENS
EXPOSURE
WHITE BAL
DAY&NIGHT
NR
SPECIAL
ADJUST
DC
SHUTTER
AGC
SENS-UP
BRIGHTNESS
D-WDR
DEFOG
ATW
AWC SET
INDOOR
OUTDOOR
MANUAL
COLOR
EXT
AUTO
B/W
2DNR
3DNR
CAM TITLE
D-EFFECT
MOTION
PRIVACY
LANGUAGE
DEFECT
0~15
OFF
AUTO
OFF
ON
OFF
BLUE
RED
BURST
IR SMART
OFF, LOW, MIDDLE, HIGH
OFF, ON (15 CHARACTER)
FREEZE
MIRROR
NEG. IMAGE
OFF, ON
ENGLISH, CHINESE,
GERMANY, FRENCH,
ITALIAN, SPANISH,
POLISH, RUSSIAN,
PORTUGUESE, DUTCH,
TURKISH
LIVE DPC
WHITE DPC
BLACK DPC
CAM ID
ID DISPLAY
BAUDRATE
EXIT
0~100
AUTO
AUTO
DEFAULT
BACKLIGHT
OFF
BLC AREA
DEFAULT
LEVEL
HSBLC
DISPLAY
BLACK MASK
SELECT
MODE
DEFAULT
LEVEL
AWB
D N (DELAY)
N D ( )DELAY
IR PWM
D N ( )DELAY
N D ( )DELAY
SHARPNESS
MONITOR
LSC
VIDEO OUT
AUTO, OFF
ON, OFF
LCD, CRT
PAL, NTSC
SAVE&END, RESET,
NOT SAVE
MODE
IRIS SPEED
MANUAL
RS485
→
→
→
→
AUTO, 1/25, 1/50, FLK,
1/200, 1/400, 1/1000,
1/2000, 1/5000, x2, x4, x6,
x8, x10, x15, x20, x25, x30
→
→
→
→
OSD settings can be done by using five-way switch
provided in I/O cable.
UP
L R
DOWN
2CU-Z301-AHD
OUTDOOR VARI FOCAL LENS
AHD IR VANDAL DOME CAMERA
1.3 Mega-Pixel
AHD Analog High Definition
OSD TREE
FEATURES

TECHNICAL SPECIFICATIONS
Print V1.0 Aug. 2K14
0230-00318
Model Name
System
Image Sensor
Scanning System
Maximum Image Resolution
Video Image Quality
Lens Type
S/N Ratio
Min. Illumination
PAL/NTSC
Progressive Scan
More than 50 dB (AGC OFF)
1280X960
As high as HD-SDI
AUTO, OFF, ON (LEVEL: 0~8)
OFF, AUTO (GRADATION: 0~2)
OFF, BLC, HSBLC (4 AREA)
ATW, AWC SET, INDOOR, OUTDOOR, AWB, MANUAL
Exposure Shutter Speed
D-WDR
Defog
Backlight
White Balance
AUTO, 1/25, 1/50, FLK, 1/200, 1/400, 1/1000, 1/2000, 1/5000, 1/10000,
1/50000, X2, X4, X6, X8, X10, X15, X20, X25, X30
Analog Output 1280H CVBS
COMET, AHD
Day&Night
DNR 2DNR
3DNR
AUTO, COLOR, B/W, EXT
OFF, LOW, MIDDLE, HIGH
OFF, LOW, MIDDLE, HIGH
RS485
D-EFFECT
Privacy Mask
Defect
SENS-UP
CAM ID
ID DISPLAY
BAUDRATE
0~255
OFF, ON
2400, 4800, 9600, 19200, 38400
FREEZE, MIRROR, NEG. IMAGE
OFF, ON (4 AREA SELECTABLE)
LIVE DPC, WHITE DPC, BLACK DPC
X2, X4, X6, X8, X10, X15, X20, X25, X30
Language
Operating Temperature
Power Supply
Power Consumption
Dimensions
Weight
ENGLISH, CHINESE, GERMANY, FRENCH, ITALIAN, SPANISH, POLISH,
RUSSIAN, PORTUGUESE, DUTCH, TURKISH
-10°C ~+50°C (14°F ~122°F)
DC12V±1V
1/3” SONY Exmor IMX238 CMOS Progressive Scan Sensor
IR LED
IR Range
69mA/DC12V (DAY); 250mA/DC12V (with IR LED ON)
up to [email protected]; 0Lux with IR on
30pcs
90 Feet
2CU-Z301-AHD
2.8~12mm Vari-focal (3 Mega) Lens
225.0mm (L) X 135.0mm (W) X 161.0mm (H)
Approx. 960g
→
INSTALLATION OF CAMERA
DIMENSIONS
Unit: mm
MOUNTING TEMPLATE STICKER
The mentioned technical drawing is for Reference only. Actual size of Mounting
Template Sticker is matched with Wall Mount Bracket.
The above mentioned technical drawings are for reference only.
All dimensions are in millimeters and approximate.
Installation Template
1.Stick Mounting Template Sticker supplied for drilling the mounting hole on the
mounting surface. The unit is intended to be mounted with four #10 screws through
the four outer holes at the base of dome camera.
2.Install the appropriate anchors or threaded fasteners.
Wall
Note:
Do not touch any component like the PCB and the lens, as this will damage the
camera.Switch on the power supply of 12 V DC after completing camera
connections. The power is supplied to the camera.
161.0
225.0
135.0
CAMERA CONNECTIONS
12 V DC Power Supply
Connect the 12 Volt DC power using DC Jack. Please make sure the polarity is correct.
Incorrect polarity may cause malfunction and/or damage to the camera.
Video Output Connection
Connect BNC connector with 75 Ohms coaxial cable at Video Out BNC socket.
Wiring Precautions:
Do not bend the coaxial cable into a curve whose radius is smaller than 10 times the
cable’s diameter.
Never staple the cable even if with circular staples. Otherwise impedance mismatching
will occur.d
Polarity Marking
(Center Positive)