3.14 Co KAMIBOT User manual

QUICK START GUIDE
MINIBOOK

•Do not apply excessive force to Kamibot's motors / wheels.
•The wheels and motors on Kamibot are replaceable. Parts are to be
replaced/repaired only by authorized Kamibot vendors.
•If any motor on Kamibot malfunctions or needs a replacement, please
contact your local authorized Kamibot vendor.
•Due to various physical factors, Kamibot's moving distance or turning angle
will not be precise.
•Due to the nature of motors, each DC motor may have a slight difference
in RPM.
•Motor RPMs can show slight differences depending on usage time and
battery consumption.
•Sensor return values may vary slightly among multiple Kamibots.
•Sensor values may vary depending on the usage environment.
•Replaceable parts (motor, battery, wheel, etc.) are covered by warranty for
6 months after purchase.
•Since the battery is a replaceable part, performance may deteriorate
depending on the usage pattern of the user. If the battery needs a
replacement, please contact your local authorized Kamibot vendor.
•Bluetooth connectivity may be affected by usage environment.
•Each Kamibot is individually tested and inspected before shipment. This
may result in a small amount of dust on the product.
•3.14 Co., Ltd. reserves the right to amend or improve the product design,
application software, and/or user guide without any restriction or obligation
to notify users.
Please observe the following to reduce risk of overheating, fire,
or explosion.
1. If batteries show signs of blistering or inflation, please immediately
contact the manufacturer or authorized dealer immediately.
2. Use a certified charger with correct specifications (5V, 1000mA).
3. Do not place near an open fire. Do not place in a microwave.
4. Do not leave in car during the summer.
5. Do not store or use in hot and humid places like saunas.
6. Do not use for extended time on bedding, carpets, or heated mats.
7. Do not leave on for an extended time in an enclosed space.
8. Keep metallic objects such as necklaces, coins, keys, and watches from
touching the battery and circuit boards.
9. When replacing the battery in Kamibot, only use lithium batteries
approved by the manufacturer.
10. Do not dissassemble, impale, or exert excessive pressure on Kamibot.
11. Do not drop from high places or impact with excessive force.
12. Do not expose to temperatures higher than 60˚C
13. Do not expose to moisture or water.
Child Safety
Children must use Kamibot under adult supervision.
Please keep out of the reach of children to avoid unsupervised use. Incorrect
use and dissassembly of product can cause harm to yourself or others. Be
careful not to get your hair or any part of your body caught on Kamibot's
wheels. This product contains small parts that can possibly be swallowed
and cause choking.
Battery
Batteries that are new or have not been used for a long time may
temporarily show signs of reduced capacity. Always fully charge the battery
before first use. Only use Kamibot for its intended purpose. Do not charge
Kamibot in a setting with temperatures outside the recommended range
(+10 ° C ~45 ° C). Always charge with the power turned off. Never removed
the battery with the power on. Kamibot's battery (Battery Model Name:
773465, Certification ID: XU100745-16002A)is to be replaced only by
WARNING: Read before using Kamibot.
!
manufacturer or authorized Kamibot vendor. Use only KC certified chargers
(5V, 4 pin USB Micro) to recharge Kamibot's battery.
Product Warranty
The warranty period for this product lasts for 1 year from date of purchase
(proof of purchase required) and we will provide free repair service only for
performance/'functional malfunctions that arise from normal use withing the
warranty period. However, the warranty for replaceable parts is 6 months.
Although the product is under warranty, under the following circumstances,
user will be charged for repair services.
1. Product malfunction due to user's fault or willful negligence.
2. Damage caused by excessive external force.
3. Product has been disassembled, modified or changed by user.
4. Replacement for parts that have worn out due to normal use.
5. Product damage caused by natural disaster.
6. Malfunction due to use of incorrect charging equipment.
7. Malfunction due to not following provided warnings.
8. Malfunction due to improper use/storage.
9. Malfunction due to immersion of water or contamination by beverage
or foreign matter.
10. Malfunction due to manipulation of software or hardware by user.
11. Malfunction caused by a different user.
Exchange & Returns
1. Defective products can only be replaced or return at place of purchase.
2. If delivered product arrives damaged, promptly contact place of purchase.
3. Product may be exchanged or returned only if hardware fails within 7 days
of purchase and presented with purchase receipt at place of purchase.
(This excludes problems with software or buyer's remorse)
4. After 7 days from purchase, only free repairs are available for users within
the warranty period.
5. A valid purchase statement (purchase receipt) must be presented.
6. Refunds are not possible if the product's exterior is damaged or if
components are missing.
Sending an Exchange or Return
1. User is responsible for costs to send product for repairs/exchange.
(Product will be return within 7 days of reception at Service Center)
2. Delivery fees for sending returns or exchanges are covered by sending
party. In case of paid repairs, consumer is responsible for all delivery fees.
3. When packing the product, put the filling material and pack it safely.
4. Repair costs will be determined by service standards set by main office.
5. In order to ensure quality customer service, please make all customer
service inquiries through place of purchase. For all purchases
made directly from 3.14 Co., Ltd., please refer to our webpage or
email [email protected].
6. Please remove any extra accessories that are not sold by our company
before sending Kamibot for repairs.
Inspection Fee
In the case of paid repair, there is a basic inspection fee that is
incurred regardless if the user decides not to have the robot
repaired. (According to 3.14 standards) In the case of free repair
covered by our policy, the basic inspection fee is not charged.
Need Assistance?
Customer Support Email [email protected]
Customer Support Line [phone]
Manufacturer Webpage http://www.kamibot.com

Table of Contents
How to use Kamibot
01
Box Contents
Specifications
Switching On / Off
Recharging Kamibot
1
2
3
4
4
4
5
5
Download
Kamibot Apps
Connect with
Bluetooth
5
6
7
6
7
7
Appendix
03
Treasure chests
Cones
Curling board
1
2
37~40
41~44
45
3
Kamibot App Guide
02
KamiCard
3
KamiCard App Layout
Using the KamiCard App
The Cards
Quick Mission: Mapboard
Quick Mission: Robot
16~25
16
17
18~19
20~23
24~25
KamiBlock
4
KamiBlock App Layout
Using the Kamiblock App
The Blocks
Quick Mission: Record
Quick Mission: Ultrasonic
26~36
26
27
28~29
30~33
34~36
KamiRemote
1
KamiRemote App Layout
Moving Kamibot
Other Controls
Quick Mission
8~118~11
88
99
1010
1111
KamiControl App Layout
Moving Kamibot
Other Controls
Quick Mission
Kamibot Control
212~15
12
13
14
15

4How to Use Kamibot
Model Name : KamiBot-001
KC Certification : MSIP-CRM-PBO-KamiBot-001
Company : 3.14 Co., Ltd.
Equipment Name : Specialty small-output wireless device (Wireless
device for wireless data communication systems)
Manufacturer/Country : 3.14 Co., Ltd. / Rep. of Korea
Manufacture Date : Marked on packaging
Kamibot, USB Cable, Mapboard(2), Papercraft(2), Quick Start Guide
1. Box Contents
Front
Servo motor
Ultrasonic
sensor
LED Back
USB Terminal
2. Specifications
How to Use Kamibot
Box Contents / Specifications / Switching On|Off / Recharging Kamibot /
Download / Kamibot Apps / Connecting via Bluetooth
01
KC Certification for Li-po Battery
Certification ID : XU100745-16002A
Company : 3.14 Co., Ltd.
Address : 467, Dongdaegu-ro, Dong-gu, Daegu, Korea 41260
Type: Battery Model Name : 773465 Rating : 3.7 V, 1600 mAh
FCC ID : 2AH2J-KAMIBOT
CE ID : G110650H
JMIC ID : 006-000470
※ Kamibot usage times can vary depending on how it is used.
Category
Size Diameter 103mm x Height 76mm
Weight 500g
Equipment
DC Motor x 2
RGB LED x 4
Servo Motor 1
Ultrasonic Sensor x 1
Infrared Sensor x 5
Wireless Connectivity Bluetooth BLE 4.0
Battery Li-poly / 3.7V / 1600mA / (charging 5V)
Usage time 2 hours on full charge
Specification
※ Kamibot can cause radio interference during operation.
Underside
0/ 0''
On/Off switch
Wheel
Infrared sensor

5
How to Use Kamibot
USB
Charging
adapter
3. Switching On / Off
4. Recharging Kamibot
0/ 0''
Kamibot is recharged by connecting it to a
power source via USB cable.
When fully charged, Kamibot's charge LED
(located at top rear) will change from red
to blue.
Turn Kamibot on by flipping
switch to the left. (ON)
Turn Kamibot off by flipping
switch to the right. (OFF)
01. Switching ON
01
02
02. Switching OFF
Charging Fully Charged

6How to Use Kamibot
5. Download
① Visit our resource library (www.kamibot.com/lib)
Select Application under Categories and
click on “KamiBlock App”.
Find KamiBlock (PC Version) and download.
② Install KamiBlock by running setup file.
① Open up Google Playstore or iOS App Store and search for "kamibot".
② Users can download any of our Kamibot apps for free (KamiControl, KamiRemote, KamiBlock, KamiCard).
① Visit our resource library (www.kamibot.com/lib)
Select Character Papercraft under Categories and
select a character papercraft.
② Download and print out your own characters.
01. Coding Application (PC)
03. Kamibot Apps (Mobile Device)
02. Character Papercrafts
Visit Resource Library
(www.kamibot.com/lib)
Google Play
App Store
Download any of the
Kamibot apps.
Search for "kamibot"
Find your download Category
on the left menu bar.
Application
Categories
Categories
Character Papercraft
Download and create your own
characters or code.
Download
Kamibot Kamibot
KamiRemote KamiRemote
Kamibot Control
KamiBlock
KamiCard
Kamibot
Kamibot Controller
Kamibot Remote
Kamibot Remote Controller

7
How to Use Kamibot
6. Kamibot Apps
7. Connect with Bluetooth
When connecting your mobile device to
Kamibot, place device on top of Kamibot.
Tap the Bluetooth button. Kamibot will turn
from pink to blue when connected .
01 02
unconnected
(Pink)
Smart
Device
Easy-to-use remote control
app for Kamibot.
KamiRemote
Use a variety of picture
cards to program Kamibot
movements and LEDs.
KamiCard
Harness the capabilities of
Kamibots sensors and motors
through block-based coding.
KamiBlock
An advanced remote control
app for Kamibot that includes
a line-tracing mode and
distance measurement.
KamiControl
connected
(Blue)

8Kamibot App Guide
1. KamiRemote App Layout
KamiRemote
02
Connect to Kamibot
Change LED
Color
Speed
Battery Level
Turn Rotator
Panel
Directional
Controls
(Refer to p. 9)
(Refer to p. 7)
(Refer to p. 10)
(Refer to p. 10)
(Refer to p. 10)
Kamibot App Guide

9
Kamibot App Guide
Try pressing these buttons.
Control Kamibot's color and movements using KamiRemote.
(Begin by connecting to Kamibot. Refer to p. 7)
2. Moving Kamibot unconnected connected
Move forward.
Turn left.
Move backward.
Turn Right.
01
03
02
04

10 Kamibot App Guide
3. Other Controls
Rotate to 0° Rotate to 90° Rotate to 180°
Dress up Kamibot as a
cat, and make it wag
it's tail with the servo motor!
You can rotate the top panel to 0°, 90°, or 180° by pressing on the buttons below.
03. Servo Motor Control
Change Kamibot's LED
Color by pressing on these
colored buttons. Choose
from red, pink, yellow,
green, sky blue, and blue.
02. Change LED Color
Slower Faster
Adjust the Kamibot's speed
by dragging the slider left
and right.
01. Adjust Speed
Red Pink Yellow Green Sky Blue Blue

11
Kamibot App Guide
Move in a "󱈕" .
Move in a " U ".
Move in a " 󱇪 ".
Move in a " 󱇦 ".
Let's make Kamibot move in the shapes shown below.
01
Things you need for this mission :
Kamibot, smart mobile device (smartphone or tablet)
Try this!
Quick Mission

12 Kamibot App Guide
1. KamiControl App Layout
Change LED Color
(Refer to p. 7)
(Refer to p. 13) (Refer to p. 14)
(Refer to p. 14)
Battery Speed
Mode Switch
Turn Rotator
Panel
Distance
Measurement
Connect to Kamibot
In line mode, Kamibot tracks and moves
along a black line on a mapboard or even a
line drawn with a black marker.
컨트롤 모드에서는 앱의 방향 버튼을 이용해 카
미봇을 직접 조종할 수 있습니다.
(동작방법은 13P참고)
Kamibot Line Mode Kamibot Control Mode
Joystick
Switch to Line Mode
Place Kamibot on a black line
path and press the "LINE"
button.
Switch to Control Mode
Press the "CONTROL"
button.
KamiControl
02 Kamibot App Guide
(Refer to p. 14)

13
Kamibot App Guide
unconnected connected
2. Moving Kamibot
Move forward.
Turn left.
Move backward.
Turn right.
01
03
02
04
Drag the Joystick around.
Control Kamibot's color and movements using KamiControl.
(Begin by connecting to Kamibot. Refer to p. 7)

14 Kamibot App Guide
3. Other Controls
You can adjust Kamibot's speed from
0~180 by dragging the needle on the
speedometer at the bottom of the screen.
Dragging your finger left on the Rotator
Control makes the the rotator turn counter
clockwise. Dragging right turns the rotator
clockwise.
Adjust Kamibot's color by dragging color slider left and right at the top of the screen.
01. Adjust Speed
03. Servo Motor Control
02. Change LED Color
Red RedPink YellowGreenSky BlueBlue

15
Kamibot App Guide
Make Kamibot follow the track on the race-track mapboard using the line mode.
You can adjust Kamibot's speed while in line mode.
Draw an interesting shape below, and control Kamibot to move in that shape.
All shapes
start with
a line.
01
02
Things you need for this mission :
Kamibot, mobile smart device (smart phone, tablet), race-track mapboard, pencil
Try this!
Quick Mission

16 Kamibot App Guide
1. KamiCard App Layout
(Refer to p. 18~19) Robot Mode Screen
Kamibot moves along a mapboard through
action cards. ( "mapboard" required. )
Control how Kamibot moves and acts with
the use of action cards.
Mapboard Mode
Robot Mode
Robot Mode
Mapboard Mode
Connect to Kamibot
Home
Reset
Kamibot
Remove
Card
Select
Language
Remove All
Start
Function
Panel
Card
Category
Scroll Right
Action Cards
Scroll Left
Difficulty
Difficulty
KamiCard
02 Kamibot App Guide

17
Kamibot App Guide
2. Using the Kamicard App
Let's learn how to use the KamiCard App.
(Begin by connecting to Kamibot. Refer to p. 7)
unconnected connected
1. Choose the card you want to use.
2. Press the start button
Move forward.

18 Kamibot App Guide
Let's learn how each of these cards works.
3. The Cards
Move forward Move backward Turn back Turn left Turn right
Robot: Kamibot
moves backward at
current speed.
Mapboard: Kamibot
turns around on the
map board.
Robot: Kamibot
turns left at current
speed.
Mapboard: Kamibot
turns left on the
map board.
Robot: Kamibot
turns right at
current speed.
Mapboard: Kamibot
turns right on the
map board.
Robot: Kamibot
moves forward at
current speed.
Mapboard: Kamibot
moves one block
forward on the
mapboard.
Servo motor - 0°Servo motor - 45°Servo motor - 90°Servo motor - 135°Servo motor - 180°
Robot, Map board:
Top panel turns to
the 0° position.
Robot:
Top panel turns to
the 45° position.
Robot,Map board:
Top panel turns to
the 90° position.
Robot:
Top panel turns to
the 135° position.
Robot,Map board:
Top panel turns to
the 180° position.
Speed - Slow Speed - Normal Speed - Fast Stop
Robot : Set speed
to slow.
Robot : Set speed
to normal.
Robot : Set speed
to fast.
Robot: Make
Kamibot stop.
Speed Cards
Servo Motor Turn Cards
Moving Cards

19
Kamibot App Guide
Delay - 1 sec Delay - 2 sec Delay - 3 sec Delay - 5 sec Delay - 10 sec
Robot : Delay action
for 1 second.
Robot : Delay action
for 2 seconds.
Robot : Delay action
for 3 seconds.
Robot : Delay action
for 5 seconds.
Robot : Delay action
for 10 seconds.
LED Color Cards
LED - Pink
LED - Green
LED - Red
LED - Off
LED - Blue LED - Sky LED - Yellow
Robot / Mapboard:
Change Kamibot's
LED Color to Pink.
Robot / Mapboard:
Change Kamibot's
LED Color to Green.
Robot / Mapboard:
Change Kamibot's
LED Color to Red.
Robot / Mapboard:
Turn off Kamibot's
LED light.
Robot / Mapboard:
Change Kamibot's
LED Color to Blue.
Robot / Mapboard:
Change Kamibot's
Color to Sky Blue.
Robot / Mapboard:
Change Kamibot's
LED Color to Yellow.
You can learn about other cards in the Kamibot Curriculum "My Friend Kami."
Time Delay Cards

20 Kamibot App Guide
4. Moving Kamibot - Mapboard Mode
① Please place Kamibot at the intersection as portrayed in .
② Kamibots "eyes" (ultrasonic sensors) should be centered as shown in .
02. Placing Kamibot on the Mapboard Correctly
① In Mapboard mode, users move Kamibot around on a gridded map.
② Kamibot moves along the black lines on the grid..
③ Kamibot performs its next action after arriving at an intersection(+).
01. Mapboard
Picture 1 Picture 2
Picture 1
Picture 2