3Com EtherLink 10 User manual

http://www.3com.com/
http://www.3com.com/productreg
®
EtherLink
®
10/100 PCI
Network Interface Card
with 3XP processor
User Guide
3CR990 Family of EtherLink NICs
You can print this user guide using Adobe Acrobat Reader, which is provided on
the
EtherCD that shipped with this product. Acrobat Reader is located in the
language subdirectory.
Part No. 09-1742-000
Published August 1999

3Com Corporation
5400 Bayfront Plaza Santa
Clara, California 95052-8145
Copyright © 1999, 3Com Corporation. All rights reserved. No part of this documentation may be
reproduced in any form or by any means or used to make any derivative work (such as translation,
transformation, or adaptation) without written permission from 3Com Corporation.
3Com Corporation reserves the right to revise this documentation and to make changes in content from
time to time without obligation on the part of 3Com Corporation to provide notification of such revision
or change.
3Com Corporation provides this documentation without warranty, term, or condition of any kind,
either implied or expressed, including, but not limited to, the implied warranties, terms or conditions of
merchantability, satisfactory quality, and fitness for a particular purpose. 3Com may make improvements
or changes in the product(s) and/or the program(s) described in this documentation at any time.
If there is any software on removable media described in this documentation, it is furnished under a license
agreement included with the product as a separate document, in the hard copy documentation, or on the
removable media in a directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy,
please contact 3Com and a copy will be provided to you.
UNITED STATES GOVERNMENT LEGEND
If you are a United States government agency, then this documentation and the software described herein
are provided to you subject to the following:
All technical data and computer software are commercial in nature and developed solely at private expense.
Software is delivered as “Commercial Computer Software” as defined in DFARS 252.227-7014 (June 1995)
or as a “commercial item” as defined in FAR 2.101(a) and as such is provided with only such rights as are
provided in 3Com’s standard commercial license for the Software. Technical data is provided with limited
rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is
applicable. You agree not to remove or deface any portion of any legend provided on any licensed program
or documentation contained in, or delivered to you in conjunction with, this User Guide.
Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or
may not be registered in other countries.
3Com, the 3Com logo, EtherDisk, EtherLink, and Dynamic Access are registered trademarks of
3Com Corporation. EtherCD is a trademark of 3Com Corporation. 3ComFacts is a service mark of
3Com Corporation.
Microsoft, MS-DOS, Windows, Windows NT and Windows 2000 are registered trademarks of
Microsoft Corporation.
Novell and NetWare are registered trademarks of Novell, Inc.
All other company and product names may be trademarks or registered trademarks of their
respective companies.
Guide written by Nick Franks. Illustrated by Mary Inden. Edited by Mike Brosius. Produced by
Mary Estrella and Georgi Felix.

C ONTENTS
1
B
EFORE
Y
OU
B
EGIN
Product Registration 9
EtherCD Navigation 10
Root Subdirectories 10
Auto Insert 11
Text Files 11
Installation Overview 12
Check List 12
Windows 2000 12
Windows 98/95 12
Windows NT 4.0 12
Windows NT 3.51 12
Netware Server 12
Minimum System Requirements 12
Making a DOS-Bootable Diskette 13
Diskette Installation 13
Making NIC Installation Diskettes 13
Installing from Diskettes 14
2
3CR990 NIC
S
NIC Overview 15
NIC Features 16
Integrated Boot ROM 16
Remote Wake-Up 17
Desktop Management Interface 18
DHCP Server Prevention 18
Broadcast Storm Limitation 18
Offline Diagnostics 18
Windows 2000 Offload Features 18
Enabling Offloads 19
3
NIC I
NSTALLATION
Installing the NIC 21

4
W
INDOWS
D
RIVERS
Windows 2000 27
Windows 98 28
Windows 95 29
New Hardware Found 30
Update Device Driver Wizard 31
Windows NT 4.0 32
Windows NT 3.51 32
Verifying Successful Installation 34
Windows 2000 34
Windows 98 and Windows 95 34
Windows NT 4.0 34
Windows NT 3.51 35
Multiple NICs 35
Windows 2000 35
Windows 95 and Windows 98 36
Windows NT 4.0 37
5
N
ET
W
ARE
D
RIVERS
Obtaining NetWare Loadable Modules 39
NetWare Server Driver 39
NetWare 3.12 39
NetWare 4.10, 4.11, and 5.0 40
Multiple NICs 41
Upgrading Drivers 41
New Installation 41
Verifying the PCI Slot Number 42
6
IP S
ECURITY
Overview 43
Creating a Security Policy 43
Defining the Console 44
Creating the Policy 44
Creating a Filter 45
Binding the Filter 45
Creating the Filter Action 45
Binding the Filter Action 46
Enabling Encryption 46
Disabling Encryption 46

7
U
PGRADING
D
RIVERS
Windows 2000 47
Windows 98 47
Windows 95 48
Determining the Version 48
Windows 95 Version A (Build 950) 48
Windows 95 OSR2 49
Windows NT 4.0 49
Windows NT 3.51 50
8
C
ONFIGURATION
Configuration Options 51
Definitions 51
3Com DOS Configuration Program 52
3Com NIC Diagnostics Program 53
Starting the 3Com NIC Diagnostics Program 53
Displaying Settings 53
Changing Settings 53
9 T
ROUBLESHOOTING
Accessing the 3Com KnowledgeBase 55
Troubleshooting the Installation 55
Interpreting the LEDs 56
Running Diagnostics Programs 56
3Com DOS Diagnostics Program 57
3Com NIC Diagnostics Program 57
General Tab 57
Configuration Tab 57
Statistics Tab 58
Diagnostics Tab 58
Support Tab 58
Flash Update Tab 58
Accessing the 3Com NIC Help System 58
Running NIC Diagnostics Tests 58
To Run the Network Test 59
To Run the NIC Test 60
To Run the Remote Wake-Up Test 60
Viewing Network Statistics 61
Accessing 3Com Support Services 61
3Com Tray Icon 62
Troubleshooting Remote Wake-Up 62
Remote Wake-Up Cable 63
Troubleshooting a Network Connection 63
Troubleshooting Hubs 64
Cabling Pinouts 64

A
S
PECIFICATIONS
NIC Specifications 65
Network Connection Criteria 66
Network Cable 66
Cabling Requirements 66
Twisted-Pair Cable 66
Unshielded Twisted-Pair Cable Categories 66
10BASE-T Description 66
100BASE-TX Description 67
RJ-45 Connector Pin Assignments 67
Flow Control 68
Pause Frames 68
Link Negotiation 68
B
T
ECHNICAL
S
UPPORT
Register this Product 69
Online Technical Services 69
World Wide Web Site 69
3Com FTP Site 69
3Com Bulletin Board Service 70
Access by Analog Modem 70
Access by Digital Modem 70
3ComFacts Automated Fax Service 70
Support from Your Network Supplier 70
Support from 3Com 71
Returning Products for Repair 72
C
S
UPPORTED
D
RIVERS
Additional Drivers 73
D
U
NINSTALLING
NIC S
OFTWARE
Windows 2000 75
Windows 98 and Windows 95 75
Windows NT 4.0 76
Windows NT 3.51 76
E
MBA B
OOT
ROM
Enabling or Disabling the Boot ROM Setting 77
Booting with the MBA Boot ROM 77
BBS BIOS-Compatible PCs 77
Non-BBS BIOS-Compatible PCs 78

F
D
YNAMIC
A
CCESS
T
ECHNOLOGY
DynamicAccess Features 79
Client PC Requirements 79
Installing DynamicAccess Technology 80
Verifying Successful Installation 81
Configuring DynamicAccess Technology 81
Removing DynamicAccess Technology 82
Windows 95/98 82
Windows NT 4.0 and Windows NT 3.51 83
I
NDEX
W
ARRANTY AND
R
EGULATORY
C
OMPLIANCE
I
NFORMATION
3Com Corporation Limited Warranty 87
Regulatory Compliance Information 88

1
B
EFORE
Y
OU
B
EGIN
Product Registration The United States government places registration requirements on using data
encryption products. To obtain customer support for 3CR990 NICs, you are
required to register your NIC product with 3Com. You can register this product
electronically or by U.S. mail.
In addition to enabling customer support for your NIC, registration also entitles
you to receive upgrade information and advance feature information.
To register electronically:
1 Insert the EtherCD (that shipped with this product) in your CD-ROM drive.
The
EtherCD Welcome screen appears.
If the Welcome screen does not appear
Go to:
EtherCD Navigation .
2 Click Register Product , and then Register Online .
3 Follow the prompts as they appear.
To register by U.S. mail:
1 Find and remove the registration card included in the EtherLink 10/100 PCI
Network Interface Card Quick Guide
that shipped with this product.
2 Fill out the registration card and drop it in the mail. (No postage is required.)
NOTE: The original version of Windows 95 (Build 950) does not automatically allow
you to change your default browser, even if Microsoft Internet Explorer is not present.
If you are running this version of Windows 95 on your PC, access the following site to
register your 3CR990 NIC product:
http://www.3com.com/productreg .
NOTE: To be able to register electronically, a web browser must be installed on your
system. You must also have an active Internet service provider (ISP) connection.

10 C
HAPTER
1: B
EFORE
YOU BEGIN
EtherCD Navigation This section provides information about EtherCD content and navigation.
If auto insert is enabled for your CD-ROM drive, the 3Com Welcome screen is
displayed when you insert the EtherCD in your CD-ROM drive.
If the Welcome screen is not displayed when you insert the EtherCD in your
CD-ROM drive, you can either enable the auto insert feature for your
CD-ROM drive or navigate to the root subdirectories.
Go to: Auto Insert.
Go to: Root Subdirectories.
The following table describes the navigation links available on the Welcome screen:
Root Subdirectories The following table lists and describes the root subdirectories included on the
EtherCD that shipped with this product.
Links Description
User Guide ■Print a PDF version of the user guide
■Copy the online version of the user guide to your desktop
■View the user guide online with a web browser
NIC Software ■Install and configure the NIC in supported Windows
operating systems
■Perform the Preinstallation procedure (Windows 2000 only)
■Install DynamicAccess technology
■Create installation diskettes to install the NIC software in a PC
that does not have a CD-ROM drive installed
Other Software ■Install Adobe Acrobat Reader (version 4.0 for English or version
3.0 for international)
Register Product ■Register your NIC product online
Release Notes ■Describes the features of 3CR990 NICs, includes frequently
asked questions and known problems information
Subdirectory Description
English Each language subdirectory contains files specific to that language.
This subdirectory contains copies of Adobe Acrobat Reader (4.0 or
3.0), CMI Client installation files, the Disk Copy utility, PDF and
HTML versions of the user guide, and a user guide for diskette
installation only in PDF format.
Help Installation and configuration files, basic troubleshooting, support
information, and system resource information.
Installs Contains images for DynamicAccess, MBA, and 3Com EtherDisks.
Ndis2 Contains the DOS NDIS 2.x driver.
NWClient Contains a DOS NetWare client driver file and runtime image file, a
sample NET.CFG file, and an installer for the DOS ODI client driver.
NWServer Contains a server driver, LDI import file, and appropriate NLMs for
loading into a NetWare 4.1x or 5.0 server.

EtherCD Navigation 11
Auto Insert If auto insert is not enabled for your CD-ROM drive, the EtherCD Welcome screen
is not displayed when you insert the EtherCD in your CD-ROM drive. To enable
auto insert on your CD-ROM drive:
1Right-click the My Computer icon, and then select Properties.
2Select the Device Manager tab.
3Click the +symbol next to CD ROM in the list.
4Select the name of your CD-ROM drive.
5Click Properties, and then select the Settings tab.
6Select the check box for Auto insert notification.
To view the Welcome screen on the CD navigator with auto insert enabled,
reinsert the CD in the CD-ROM drive.
Text Files The following table lists the text files that are included in the Help directory on the
EtherCD that shipped with this product.
Text File Name Text File Description
win2000.txt Explains how to install the NIC, verify a successful installation, uninstall
the NIC software, and update the driver.
win98.txt Explains how to install the NIC, verify a successful installation, uninstall
the NIC software, and update the driver.
unt_w98.txt Explains how to perform an automated installation of Windows 98 over
the network (unattended install).
w95ndis.txt Provides instructions specific to Windows 95 for first-time installations,
updating drivers, removing the NIC driver and EtherCD software,
troubleshooting installation problems, and a peer-to-peer
networking overview.
w95netwr.txt Explains how to install the Windows 95 driver to support the Microsoft
client for NetWare networks.
winnt.txt Provides installation instructions and troubleshooting tips for installing
drivers in Windows NT 4.0 and Windows NT 3.51.
unt_nt4.txt Explains how to perform an automated installation of Windows NT 4.0
over the network (unattended install).
netware.txt Explains how to install the ODI driver for the NetWare 4.1x and
5.0 server.
client32.txt Contains NetWare 4.11 on Windows 95/98 client driver
installation notes.
nwdosodi.txt Explains how to install the driver for a 16-bit NetWare client
running DOS.
support.txt Contains information about technical assistance services available
from 3Com.
trouble.txt Contains troubleshooting tips.
wakefaq.txt Contains common questions and answers about Remote Wake-Up.
license.txt Includes the wording from the 3CR990 NIC software license agreement.
register.txt Explains why and how to register your NIC.

12 CHAPTER 1: BEFORE YOU BEGIN
Installation Overview This section provides basic information that you need before you start the installation.
Check List Before you start the installation, verify that you have all of the components that
shipped with this product. If any of these items are damaged or missing, contact
your shipper or network supplier.
■3CR990 NIC
■Remote Wake-Up cable (Used only for 2.1 PCI specification-compliant PCs.)
■EtherCD Version 1.0 for the 3CR990 Family
You also need to know the network protocol (for example, IPX, NetBEUI, or TCP/IP).
Windows 2000 If you are running Windows 2000 on your PC, the first step is to run the
Preinstallation program on the EtherCD before you install the NIC in your PC.
To run the Preinstallation program, from the EtherCD Welcome screen
click NIC Software, Drivers and Diagnostics, NIC Preinstallation,
NIC Installation with Windows 2000, and then Done.
Windows 98/95 If you are running Windows 98 or Windows 95 on your PC, the first step is to
install the NIC.
Go to: NIC Installation.
Windows NT 4.0 If you are running Windows NT 4.0 on your PC, the first step is to install the NIC.
Go to: NIC Installation.
Windows NT 3.51 If you are running Windows NT 3.51 on your PC, the first step is to install the NIC.
Go to: NIC Installation.
Netware Server If you are running Netware on a server, the first step is to install the NIC.
Go to: NIC Installation.
Minimum System
Requirements Your PC or server must meet the following requirements before you can
successfully install the 3CR990 NIC:
■80486 or Pentium processor
■Available bus-mastering PCI slot
■Minimum of 640 K of memory

Making a DOS-Bootable Diskette 13
Making a
DOS-Bootable
Diskette
For installation and configuration procedures that require you to boot from DOS,
you cannot successfully use the MS-DOS prompt from within Windows. Perform a
“clean” boot from DOS or use a DOS boot disk.
To make a DOS-bootable diskette:
1Insert a blank, formatted diskette in drive A.
2At the DOS prompt, enter:
sys a:
System files are copied to the diskette.
3Remove the diskette from drive A and attach a label for future reference.
Diskette Installation Installation diskettes are not included with this product. If you do not have
a CD-ROM drive installed in your PC, you need to locate a system with a
CD-ROM drive and create installation diskettes from the EtherCD that
accompanied this product.
Go to: Making NIC Installation Diskettes.
If you have Internet access, you can also download installation disk images from
the 3Com World Wide Web site.
Go to: http://support.3com.com/software.
Making NIC
Installation Diskettes You will need three blank, formatted diskettes with labels for this operation. Label the diskettes 1, 2, and 3.
To make installation diskettes:
1Insert the EtherCD in the CD-ROM drive.
2From the main menu, select Installation, and then click Create Installation
Diskettes.
3Click Create, and then follow the prompts.
Go to: Installing from Diskettes.
NOTE: To use the CD-ROM drive on a PC or server in a DOS environment, the DOS
drivers for the CD-ROM drive must be installed. Consult the documentation that
accompanied your CD-ROM drive or your motherboard for information about how
to install these drivers.
NOTE: If the PC or server is only running DOS and a CD-ROM drive is not installed,
you must install the NIC software using installation diskettes. For more information
about installation diskettes
Go to: Diskette Installation.
NOTE: Text on the installation diskettes is in English only.

14 CHAPTER 1: BEFORE YOU BEGIN
Installing from Diskettes To install NIC software, you will need the NIC, your Windows operating system
source diskettes, and the NIC installation diskettes.
■To install NIC software using installation diskettes, see the file DISKETTE.PDF
on the EtherCD. The path for this file is:
Installations \ Diskette.pdf
■To make installation diskettes
Go to: Making NIC Installation Diskettes.

23CR990 NICS
NIC Overview The 3CR990 network interface cards (NICs) represent a new generation of secure,
intelligent client NICs with an on-board RISC processor (3XP processor). The RISC
processor is designed to optimize system and network performance. Optimization
occurs by offloading key networking and security tasks even when running
bandwidth-intensive applications such as voice, video, imaging, and Internet and
intranet applications. These NICs connect your PCI-compliant PC to a 10 Mbps or
100 Mbps Ethernet network and provide advanced features for high performance
and secure transactions.
The 3CR990 NICs provide up to 3DES (Data Encryption Standard 168-bit)
encryption. Encryption processing is handled entirely by the RISC processor
and the encryption chip that reside on the 3CR990 NICs.
The onboard encryption chip enables true end-to-end network security (IPSec)
at the data capacity of the connected network cable (wire speed), without
sacrificing performance.

16 CHAPTER 2: 3CR990 NICS
The following figure shows the 3CR990 NIC and the location of its
major components.
NIC Features The 3CR990 NICs provide these features for supported IP and IPX environments:
■Integrated Boot ROM
■Remote Wake-Up
■Desktop Management Interface (DMI)
■DHCP server prevention
■Broadcast storm limitation
■Offline diagnostics
Integrated Boot ROM Managed PC Boot Agent (MBA) software provides the multiprotocol preboot
firmware and tools. MBA adds management capabilities to the NIC by enabling
the PC to boot from a network server, rather than from its local drive. 3CR990
NICs have an integrated boot ROM already installed on the NIC.
For information on configuring and using the MBA, see the Managed PC Boot
Agent (MBA) User Guide located on the EtherCD. Navigate the following path:
CD ROM drive letter \ Installs \ Mba \ Manual, and then double-click
3ComGuide.exe to unzip the compressed user guide file.
Remote Wake-Up
(RWU) connector
Encryption chip
3XP processor
TX DATA
ACT
10
100 L
N
K
3CR990 NICs support up to
168-bit (3DES) encryption

NIC Features 17
MBA preboot support allows you to use management applications to perform
tasks such as:
■Installing and configuring a new PC that has never been connected to
the network.
■Upgrading software.
■Scanning for viruses.
■Performing disaster recovery tasks.
In addition to firmware, MBA has a complete set of tools, utilities, and pre-OS
software that enables network administrators to perform tasks such as:
■Reconfiguring multiple systems at once.
■Backing up hard drives automatically.
For more information on the management features supported by 3C990 NICs,
access the 3Com World Wide Web site
Go to: http://www.3com.com/managedpc.
Remote Wake-Up Remote Wake-Up provides the ability to remotely power-up a network PC.
When the PC is in sleep mode and receives a wake-up packet (Magic Packet
frame) through the LAN, the NIC turns on the power to the PC. To use the
Remote Wake-Up feature, a desktop management application is also required
that is able to generate a Magic Packet Remote Wake-Up signal.
Your PC or server must be either 2.1 or 2.2 PCI specification-compliant to
use Remote Wake-Up. A PC that meets the PCI 2.1 specification uses the
3-pin Remote Wake-Up connector on the PC motherboard. A PC that meets
the PCI 2.2 specification uses the PCI bus on the motherboard to handle
Remote Wake-Up. (A 3-pin connector is not provided on the motherboard.)
Additionally, to support Remote Wake-Up, a PC must have a:
■BIOS that supports Remote Wake-Up (power management capability)
■5-volt standby power supply unit rated at a minimum of 375 mA
If you are unsure whether your PC meets the requirements listed above, refer to
your PC documentation or contact your PC manufacturer. For more information
on Remote Wake-Up, including a list of PCs that currently support this feature,
access the 3Com World Wide Web site
Go to: http://www.3com.com/partners/acpi.
NOTE: The 3CR990 NICs provide a network connection with or without the
Remote Wake-Up cable installed.

18 CHAPTER 2: 3CR990 NICS
Desktop
Management Interface Desktop Management Interface (DMI) is a network management standard that is widely accepted for managing Intel-based computers. The 3Com DMI Agent
allows any DMI management application to access information such as the NIC
driver location, version, and size; packets sent statistics; crc receive errors; and
much more.
The 3Com DMI Agent consists of a DMI browser with the following components:
■DMI service layer
■DMI agent
■GUI installer
■NDIS drivers
DHCP Server Prevention
This feature prevents the PC from acting like a DHCP server. All receive packets are
passed through a DHCP filter and are discarded if they are deemed to be destined
for the DHCP process.
Broadcast Storm Limitation
Broadcast throttling is implemented on both the transmit and receive data
streams. The user can specify a transmit broadcast threshold as a percentage of
the transmit bandwidth. The adapter monitors each data stream and discards any
broadcast or multicast packets that exceed this limit.
To install DMI, on the EtherCD Welcome screen, click NIC Software,
DynamicAccess Technology, and Install 3Com DMI Agent now.
Offline Diagnostics This product provides offline diagnostics programs for configuring, testing,
and troubleshooting 3CR990 NICs. The configuration program within
the DOS diagnostics program is used for a PC running Windows 2000,
Windows NT 3.51, or DOS. The 3Com NIC diagnostics program (3Com NIC
Doctor) is a windows-based program used for a PC running Windows 98,
Windows 95, or Windows NT 4.0.
Windows 2000
Offload Features Additionally, the 3CR990 NICs support windows 2000 offload features in an
IP environment. The 3CR990 NIC Windows 2000 offload features are designed
to enhance the Windows 2000 operating system capabilities by offloading key
TCP/IP networking and security tasks from the Windows 2000 operating system:
■IPSec Offload—reduces CPU utilization by allowing the 3XP processor and
a crypto chip on the NIC to perform data encryption operations.
■TCP Segmentation Offload—reduces CPU utilization by allowing the
3XP processor on the NIC to perform segmentation of TCP packets
■IP and TCP checksum Offload—reduced CPU utilization by allowing the
3XP processor on the NIC to perform the checksum calculation of TCP/IP
and UDP/IP packets
■802.1P Packet Priority Offload—reduces CPU utilization by allowing the
3XP processor on the NIC to perform the insertion of the 802.1Q tag
header into the packet

Windows 2000 Offload Features 19
Enabling Offloads Windows 2000 provides the capability to individually enable or disable each of the
four offload features. (The default setting for these features is enabled.)
To enable or disable individual Offload settings in Windows 2000:
1Click the My Network Places desktop icon.
The Network and Dial-up Connections screen appears.
2Click the Local Area Connection icon.
The Local Area Connection Properties screen appears.
3Click Configure.
The 3Com EtherLink 10/100 NIC with 3XP processor (3CR990-TX-9x)
screen appears.
4Click the Advanced tab.
5Select Enable Offloads in the Property list box.
6Enter the hex number below for the desired offload state in the Value entry box.
7Close all open windows.
The following table shows the hex values for the offload functions:
NOTE: For users running the Beta 3 version of Microsoft Windows 2000, the
Offload function must be globally enabled in Windows 2000 before individual
offload features can be enabled or disabled.
See the readme.txt file in the root of the EtherCD for the latest information about
enabling and disabling offload features in the Beta 3 version of Windows 2000.
NOTE: The default hex value is F: all offloads enabled.
Hex Value Offload Function Enabled Hex Value Offload Function Enabled
0 Offloads disabled 8 802.1P Packet Priority
1 IPSec 9 802.1P Packet Priority
IPSec
2 TCP Segmentation A 802.1P Packet Priority
TCP Segmentation
3 TCP Segmentation
IPSec B 802.1P Packet Priority TCP Segmentation
IPSec
4 IP and TCP Checksum C 802.1P Packet Priority
IP and TCP Checksum
5 IP and TCP Checksum
IPSec D 802.1P Packet Priority IP and TCP Checksum
IPSec
(continued)
6 IP and TCP Checksum
TCP Segmentation E 802.1P Packet Priority IP and TCP Checksum
TCP Segmentation

20 CHAPTER 2: 3CR990 NICS
7 IP and TCP Checksum
TCP Segmentation
IPSec
F 802.1P Packet Priority
IP and TCP Checksum
TCP Segmentation
IPSec
Hex Value Offload Function Enabled Hex Value Offload Function Enabled