3DConnexion Keyboard Pro with Numpad User manual

Manual
3Dconnexion®Keyboard Pro with Numpad
Driver Version: 3DxWare 10.8.0 and higher

3Dconnexion Keyboard Pro with Numpad | 2
Table of Content
QuickStart Guide................................................................................................................................. 3
Desktop Setup...................................................................................................................................................................................3
Installation........................................................................................................................................................................................3
Feature Guide ..................................................................................................................................... 4
3Dconnexion Keyboard Pro.................................................................................................................................................................4
3Dconnexion Numpad Pro..................................................................................................................................................................5
3Dconnexion Settings.......................................................................................................................... 7
Advanced Settings.............................................................................................................................................................................8
Buttons .............................................................................................................................................................................................9
Assigning Quick Macros to buttons....................................................................................................................................................9
Assigning Commands using the flyout window.................................................................................................................................10
Creating Macros..............................................................................................................................................................................10
Creating Radial Menus.....................................................................................................................................................................11
Paired Devices.................................................................................................................................................................................11
3Dconnexion Home.............................................................................................................................12
Technical Specifications.....................................................................................................................13

3Dconnexion Keyboard Pro with Numpad | 3
QuickStart Guide
Desktop Setup
Place the Numpad Pro, so that it fits your preferences and tasks. For a natural and ergonomic posture, we recommend placing
it at the opposite side of your CadMouse.
Installation
1. Connect
Make sure the Keyboard Pro is connected to an USB port of your PC.
2. Turn on the Numpad Pro
Turn on the device with the power switch located on the right rear side of the Numpad.
3. Download and install the latest software package
Make sure you have the latest 3Dconnexion software installed. The latest version can be downloaded at
3dconnexion.com/drivers.

3Dconnexion Keyboard Pro with Numpad | 4
Feature Guide
3Dconnexion Keyboard Pro
3Dconnexion Keys
The keyboard features 12 additional programmable function keys, located above the standard keys. It instantly recognizes the
applications you are using, as well as their environments and automatically assigns the most used commands to the keys.
Note: The 3Dconnexion driver (3DxWare) is needed to make the 3Dconnexion Keys work.
On-Screen Display
After installing the driver, the On-Screen Display (OSD) will appear on your desktop, providing a convenient visual reminder of
the commands assigned to the 3Dconnexion Keys. You can easily drag and drop the OSD to a different position, where it is
more convenient (e.g., on the taskbar near the systray).
FN-Key
Press the FN-Key to control the Media Keys.
Press and hold the FN-Key to assign a set of convenient commands to the 3Dconnexion Keys. You will be able to
start your preferred applications and have access to media controls. Press and hold the FN-Key and start the
3Dconnexion Settings to personalize them according to your preference.

3Dconnexion Keyboard Pro with Numpad | 5
Media Keys
Whether it's a virtual meeting, music, or video, you can use the F9-F12 keys in
combination with the FN-Key to control the microphone and speakers.
Smart Print-Key
The 3Dconnexion Smart Print-Key helps you take screenshots in a flash. Pressing the Smart Print-Key starts the
Microsoft Windows screen snipping function. Select whether you want to capture a rectangle or the entire screen
and create your screenshot. The screenshot is automatically saved to the clipboard and is ready to be pasted.
Integrated 3Dconnexion Receiver
Your Keyboard Pro comes with a built-in 3Dconnexion Receiver that lets you connect the 3Dconnexion Numpad and up to five
additional 3Dconnexion devices of the SpaceMouse and CadMouse product lines to your PC. Open the 3Dconnexion Settings
panel, click on the Paired Devices button and follow the instructions.
3Dconnexion Numpad Pro
3Dconnexion Keys
The Numpad Pro features four additional programmable function keys, located above the standard keys. It instantly recognizes
the applications you are using, as well as their environments and automatically assigns the most used commands to the keys.
Note: The 3Dconnexion driver (3DxWare) is needed to make the 3Dconnexion Keys work.
On-Screen Display
After installing the driver, the OSD for the Numpad Pro is hidden by default. In order to enable the OSD open the 3Dconnexion
Settings, select the Numpad Pro, click on Buttons, and activate the checkbox Always show On-Screen Display.

3Dconnexion Keyboard Pro with Numpad | 6
Globally Programmable Keys
In addition to the 3Dconnexion Keys, your Numpad Pro provides five Globally
Programmable Keys, whose function remains the same system-wide (no matter in
which application you are currently working). They can be easily personalized in the
3Dconnexion Settings.
Decimal Separator
You can adjust the Decimal Separator of your Numpad Pro to suit your preferences in the 3Dconnexion Settings.
Status LED
The Numpad Pro features a status LED that shows the battery status and the connection status as well.
Battery status:
Immediately after turning on the device or after wake-up from sleep, the LED will show the current charge level:
- Green The Numpad Pro is sufficiently charged.
- Red The Numpad Pro has less than 10% charge and requires charging.
Pairing and connection status:
After the battery status is displayed, the device will show the current connection and pairing mode.
- White (steady) Successfully connected in 3Dconnexion wireless mode.
- White (pulsing) Ready for 3Dconnexion wireless connection.
- Blue (steady) Successfully connected in Bluetooth mode.
- Blue (pulsing) Ready for Bluetooth connection.
After the device has been successfully connected, the LED turns off.
Charge your Numpad Pro
Connect your Numpad Pro to a charging port on your computer by using the included USB cable. As long as the Numpad Pro is
charging, the status LED will flash green and it will turn solid green when it is fully charged.
Connect your Numpad Pro
The Numpad Pro can be connected via your Keyboard Pro, Bluetooth®(Swift Pair included) or
USB cable. The wireless connection between your Keyboard Pro and your Numpad is always
encrypted in order to ensure the security of your data.
Note: Since your Numpad is factory paired with the Keyboard, you must first remove this connection, before you can pair it via
Bluetooth. This can be done by opening 3Dconnexion Settings, selecting the Keyboard Pro and going to Paired Devices.
Afterwards turn on the device and the status LED on your Numpad Pro will start flashing blue. Next, make sure Bluetooth is
active on your PC and in discover mode. Now choose your device from the list and pair it to your PC.

3Dconnexion Keyboard Pro with Numpad | 7
3Dconnexion Settings
You can access the 3Dconnexion Settings panel either via 3Dconnexion Home (on your desktop), the icon in your
notification area (systray), or the Windows start menu.
The name of the active application is displayed at the top of the panel. Any setting change is relevant to this
application only.
If multiple 3Dconnexion devices are connected, you can select the desired product to configure by clicking on the flyout button
at the top left of the panel.

3Dconnexion Keyboard Pro with Numpad | 8
Advanced Settings
Settings that can be configured in the Advanced Settings panel are not application-specific but are the same for all
applications system-wide.
Keyboard Pro
Media Keys
By clicking on the >arrow on the right-hand side of the key field you open a flyout window with the help of which you can
assign commands, macros or radial menus to the Media Keys (Assigning Commands using the flyout window).
Speed
By moving the two sliders you can change the repeat delay (the time between when you press and hold a key and when the
computer detects the keystroke as multiple keystrokes) and the repeat rate (the speed at which the computer outputs the
multiple keystrokes). In the field below you can test your changes.
Disabled Keys
Caps Lock: by checking this box, the Caps Lock Key is deactivated.
Windows: by checking this box, the Windows Key is deactivated.
Insert: by checking this box, the Insert Key is deactivated.
Numpad Pro
Key Configuration
By clicking on the >arrow on the right-hand side of the key field you open a flyout window with the help of which you can
assign commands, macros or radial menus to the keys (Assigning Commands using the flyout window).

3Dconnexion Keyboard Pro with Numpad | 9
Buttons
The Buttons panel within 3Dconnexion Settings allows you to assign commands, macros or radial menus to the programmable
3Dconnexion Keys, which are placed on top of your Keyboard/Numpad. The name of the active application is displayed at the
top of the panel. Any setting change is relevant to this application only. While you are working in an application, the On-Screen
Display always shows you the current assignment of the keys for this app. Uncheck Always show On-Screen Display to hide
the OSD.
A note about Environment sensitivity: Some applications feature environment sensitive key mapping. In those applications you
can have different key assignments depending on the current active environment.
Numpad Pro
Decimal Separator
You can decide whether the decimal separator is automatically selected based on the system settings or whether you manually
choose the Comma or Dot setting for a certain application.
Assigning Quick Macros to buttons
Click on the text in the key field and press the required key or key combination to quickly assign a keystroke or macro to a
3Dconnexion Key.
When a macro is created, it always sends a press and release command. If you want to assign a press and hold command
instead (for example Ctrl or Shift), you should use the Keyboard command category in the flyout window.

3Dconnexion Keyboard Pro with Numpad | 10
Assigning Commands using the flyout window
Clicking on the >arrow on the right-hand side of the key field opens a flyout window for that Keyboard/Numpad key:
The category of the command that it is currently assigned to is highlighted in bold. The flyout window allows you to browse or
search for commands in different categories such as 3Dconnexion or application commands. When you select a command by
clicking on it, it is automatically assigned to the Keyboard/Numpad key.
Creating Macros
First click on the >arrow on the right-hand side of the key field, then expand the Macro category and click on New Macro.
This opens the macro editor where you can assign a name for your macro and a sequence of keystrokes in the corresponding
fields. Clicking on Save will automatically assign the new macro to the button from where you opened the panel.

3Dconnexion Keyboard Pro with Numpad | 11
Creating Radial Menus
First click on the >arrow on the right-hand side of the key field, then expand the Radial Menu category and click on New
Radial Menu.
This brings up the radial menu editor where you can assign a name and commands to the different sections. Your new radial
menu will be automatically assigned to the key from where you opened the panel.
Paired Devices
As your Keyboard Pro has an integrated 3Dconnexion Receiver, you can connect the 3Dconnexion Numpad and up to five
additional 3Dconnexion devices of the SpaceMouse and CadMouse product line via the Paired Devices panel.
First click the Add Device or +button, then choose your device and follow the instructions of the pairing tool. The
communication between your 3Dconnexion Numpad Pro and your Keyboard Pro is fully encrypted.

3Dconnexion Keyboard Pro with Numpad | 12
3Dconnexion Home
Once you have successfully installed the latest 3Dconnexion driver, 3Dconnexion Home gives you access to various
3Dconnexion apps:
Trainer:
Learn how to quickly use the 3Dconnexion SpaceMouse.
Manual:
Here you can find the manuals for all 3Dconnexion products.
Settings:
Open the settings panel to customize your 3Dconnexion devices.
Viewer:
Use the 3Dconnexion Viewer to review 3D models.
Collage:
3Dconnexion Collage lets you create high resolution picture collages with your SpaceMouse.
Demo:
Test and practice your skills by assembling the landing gear of an aircraft.
Registration:
Register your product after the installation to benefit from 3Dconnexion services.
Videos:
Find instructive videos for your 3Dconnexion devices.

3Dconnexion Keyboard Pro with Numpad | 13
Technical Specifications
Dimensions & Weight
3Dconnexion Keyboard Pro
Width: 366 mm / 14.4’’
Depth: 229 mm / 9.0’’
Height: 16 mm / 0.6’’
Weight: 880 g / 1.94 lb / 31 oz
3Dconnexion Numpad Pro
Width: 114 mm / 4.5’’
Depth: 229 mm / 9.0’’
Height: 16 mm / 0.6’’
Weight: 250 g / 0.55 lb / 8.8 oz
Battery - 3Dconnexion Numpad Pro
Rechargeable lithium polymer battery with a capacity of 350 mAh
Supported Operating Systems
Microsoft Windows
More information
Package Contents
3Dconnexion Keyboard Pro
3Dconnexion Numpad Pro
3Dconnexion Cable USB-A / USB-C (1.5m)
Certifications and Registrations
CE, UKCA, EAC, FCC, RCM, WEEE, RoHS-EU, REACH-SVHC, RoHS-CN
More information
Warranty
3-year limited hardware warranty
Support
3dconnexion.com/support
Other manuals for Keyboard Pro with Numpad
1
Table of contents
Other 3DConnexion Keyboard manuals