3M TL20 Firmware update

Rev 2007-05-04 © 3M 2007 – All Ri
g
hts Reserve
d
1
3M™ Temperature Logger TL20/TL25 - Software Installation Guide
Please follow this procedure to install the TL series software correctly on a personal computer (PC).
You have the choice to download the software from the 3M website free of charge or from
the 3M temperature logger CD available from 3M.
•The CD contains three folders:
•Installer for the Spanish and English version
•Installer for the French and English version
•Document folder with Instruction Sheets in 8
languages and Product Fliers in 3 languages
•Install software by clicking one of two installer file:
“3M_TempLogger_4_06_Setup_Esp_Eng.exe”
“3M_TempLogger_4_06_Setup_Frc_Eng.exe”
Please do not connect the USB cable
before installing the 3M TL series
software.
•After the installation of the software is complete,
connect the USB cable to one of the USB port
available in the PC.

Rev 2007-05-04 © 3M 2007 – All Ri
g
hts Reserve
d
2
3M™ Temperature Logger TL20/TL25 - Software Installation
•When the installation is completed, the
shortcut icon “3M Temperature
Logger” will be placed on the Desktop.
•Proceed with the software installation as
indicated on the following screens.
•Check “I Accept” and click “Next”.
3M Temperature Logger.lnk

Rev 2007-05-04 © 3M 2007 – All Ri
g
hts Reserve
d
3
Downloading The TL Software from 3M website

Rev 2007-05-04 © 3M 2007 – All Ri
g
hts Reserve
d
4
Downloading The TL Software from 3M website

Rev 2007-05-04 © 3M 2007 – All Ri
g
hts Reserve
d
5
Downloading The TL Software from 3M website

Rev 2007-05-04 © 3M 2007 – All Ri
g
hts Reserve
d
6
Downloading The TL Software from 3M website

Rev 2007-05-04 © 3M 2007 – All Ri
g
hts Reserve
d
7
Downloading The TL Software from 3M website

Rev 2007-05-04 © 3M 2007 – All Ri
g
hts Reserve
d
8
Downloading The TL Software from 3M website

Rev 2007-05-04 © 3M 2007 – All Ri
g
hts Reserve
d
9
Downloading The TL Software from 3M website

Rev 2007-05-04 © 3M 2007 – All Ri
g
hts Reserve
d
10
3M™ Temperature Logger TL20/TL25 - Hardware Installation
Select the option:
“Yes, I have already connected the hardware” and click
Next to complete the Hardware installation process.
•Scroll and check if the “Kooner USB Device” is
already installed.
•If yes, select it and click on it.
•If no, reinstall the TL software and reconnect the
USB cable after completing the installation.
•This will bring up the next window confirming if
the driver is installed correctly.
•If it confirmed that it is working properly,
click “Finish”.