3SIXT Snap Stick User manual

USER GUIDE
SNAP STICK
Wireless Smartphone
Camera Stick
For more information visit
www.3sixtgear.com/support
CAUTION & SAFETY
• Please read the User Guide carefully before use
• Please do not dismantle Snap Stick
• Please do not use corrosive solvent to clean it
• Do not charge Snap Stick under high temperature
conditions
• Do not use Snap Stick in wet or damp conditions
•Do not dispose Snap Stick into re
• Do not knock or drop Snap Stick
INDICATIONS
SPECIFICATIONS
Baery capacity 60mAH
Charging voltage DC 5.0V
Charging time 30 min
Standby time 100 hours
Autosleep/Standby 10 min without use
Working environment
temperature -10° to 40°
Working environment
relative humidity 10% to 90%
LED 1 - at the end of the
Snap Stick
Red light: Charging
O: Charging is finished
LED 2 - in the buon
Blinking: BT Wireless
pairing process
Solid: The Snap Stick is on
and ready to use
#The pairing of Snap Stick to your camera is only needed once. If you ‘restore’ or ‘reset’ your
device to factory settings after pairing, you may have to re-pair Snap Stick to your device.
^The standard camera app is the app that came packaged with the device. Third party camera
apps may not behave according to Snap Stick’s User Guides instructions.
LED 1
LED 2

For more information and support visit www.3sixtgear.com/support
PAIRING for the first time
TURN OFF
The Snap Stick will automatically turn off to
save battery:
• If the button is not pressed within 10 minutes;
• If the phone is out of range of the BT
signal from the Snap Stick (approx. 10m).
To start the Snap Stick again, press the button once.
TO CHARGE
TAKE A PHOTO
Geing familiar with your
3SIXT SNAP STICK
Snap
Stick
USB Cable
USB Charging Port LED Light
‘Press’
Button
SNAP STICK
Snap
Stick
USB Charging Port
‘Press’
Button
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
1
1
1
2
2
2
3
3
3
4
4
5
5

For more information and support visit www.3sixtgear.com/support
PAIRING for the first time
TURN OFF
The Snap Stick will automatically turn off to
save battery:
• If the button is not pressed within 10 minutes;
• If the phone is out of range of the BT
signal from the Snap Stick (approx. 10m).
To start the Snap Stick again, press the button once.
TO CHARGE
TAKE A PHOTO
Geing familiar with your
3SIXT SNAP STICK
Snap
Stick
USB Cable
USB Charging Port LED Light
‘Press’
Button
SNAP STICK
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
BT Wireless
Press for 3 sec
LIGHT STARTS
FLASHING
55mm - 85mm
ON
On Press
BT Wireless
USB 5V
Adapter
3S-0864 Pair
LIGHT
TURNS ON
LIGHT
TURNS ON
30min =
USB
a.
b.
CAMERA
USB 5V
Adapter
USB
a.
b.
100%
1
1
1
2
2
2
3
3
3
4
4
5
5

USER GUIDE
SNAP STICK
Wireless Smartphone
Camera Stick
For more information visit
www.3sixtgear.com/support
CAUTION & SAFETY
• Please read the User Guide carefully before use
• Please do not dismantle Snap Stick
• Please do not use corrosive solvent to clean it
• Do not charge Snap Stick under high temperature
conditions
• Do not use Snap Stick in wet or damp conditions
•Do not dispose Snap Stick into re
• Do not knock or drop Snap Stick
INDICATIONS
SPECIFICATIONS
Baery capacity 60mAH
Charging voltage DC 5.0V
Charging time 30 min
Standby time 100 hours
Autosleep/Standby 10 min without use
Working environment
temperature -10° to 40°
Working environment
relative humidity 10% to 90%
LED 1 - at the end of the
Snap Stick
Red light: Charging
O: Charging is finished
LED 2 - in the buon
Blinking: BT Wireless
pairing process
Solid: The Snap Stick is on
and ready to use
#The pairing of Snap Stick to your camera is only needed once. If you ‘restore’ or ‘reset’ your
device to factory settings after pairing, you may have to re-pair Snap Stick to your device.
^The standard camera app is the app that came packaged with the device. Third party camera
apps may not behave according to Snap Stick’s User Guides instructions.
LED 1
LED 2

USER GUIDE
SNAP STICK
Wireless Smartphone
Camera Stick
For more information visit
www.3sixtgear.com/support
CAUTION & SAFETY
• Please read the User Guide carefully before use
• Please do not dismantle Snap Stick
• Please do not use corrosive solvent to clean it
• Do not charge Snap Stick under high temperature
conditions
• Do not use Snap Stick in wet or damp conditions
•Do not dispose Snap Stick into re
• Do not knock or drop Snap Stick
INDICATIONS
SPECIFICATIONS
Baery capacity 60mAH
Charging voltage DC 5.0V
Charging time 30 min
Standby time 100 hours
Autosleep/Standby 10 min without use
Working environment
temperature -10° to 40°
Working environment
relative humidity 10% to 90%
LED 1 - at the end of the
Snap Stick
Red light: Charging
O: Charging is finished
LED 2 - in the buon
Blinking: BT Wireless
pairing process
Solid: The Snap Stick is on
and ready to use
#The pairing of Snap Stick to your camera is only needed once. If you ‘restore’ or ‘reset’ your
device to factory settings after pairing, you may have to re-pair Snap Stick to your device.
^The standard camera app is the app that came packaged with the device. Third party camera
apps may not behave according to Snap Stick’s User Guides instructions.
LED 1
LED 2