SAFETY PRECAUTIONS INSTRUCTIONS TO CHARGE A DEVICE
For example: to charge amobile phone or other electronicdevice
1. Do not disassemble,break or puncture the battery.
2. Do not modifythe built-in circuit in any way. Improper usage, dropping orshort
circuiting of the batterymay damage the batterypermanently.
3. Use and storethe product in normal conditions. Keep the powerpackaway from
heat, fire, wet or dampplaces as it maycause fire or explosion(The working
temperature range: -10~~60 degree).
4. To maintain life-span, storethe powerpack with sufficientcharge. Capacity may
decrease if the battery iskept flat for extendedperiods.
5. Store the productcarefully and out of reach from children.
6. Extend the retractablecable by pulling gently on both cables. Donot over pull the
cable beyond the limit.
Please read and observe allwarning and instructions givenon this owner's manual
and those marked onthe unit before using. This product has beendesigned and
manufactured to assure personalsafety. Improper use can result in danger. Please
observe the following proceduresfor installation, use and servicing.
1) Connect the suppliedUSB/DC cable (or devices own USB cable) tothe
powerpack s USB output port.
2) Press the buttonto select charging output on (once or threetimes).
3) Connect the otherend of the cable to a device usingthe appropriate
connector. The deviceshould indicate charging.
4) Extend the retractablecable by pulling apart both cables gently
and lock at differentlengths. Release the cableby
pulling both cables slightly andclosing slowly.
5) Remember to poweroff the powerpack
after charging is complete and
disconnect cable.
Ensure powerpack is in charging
mode before connecting to a device
or it may not charge.
