A.R.T. Furniture 245203-1707 User manual

ASSEMBLY INSTRUCTIONS
UPH. BACK ARM CHAIR
245203-1707
Thank you for purchasing this quality product from A.R.T. Furniture. Be sure to check all
packing material for parts which may have come loose inside the carton during shipment.
Identify and count all parts and compare with the parts list below.
Note: Some furniture is heavy, it is recommended that two people assemble this item to
avoid injury or damage.
! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE !
Page 1 8/6/2015
No. Qt.
A
F
5
16" X 1 1
4" Bolt
5
16" NUT
1
4
Hardware List
B5
16" X 3 1
4" Bolt 4
CWrench 1
D5
16" Flat Washer 13
E5
16" Lock Washer 13
1
2
PARTS LIST
DESCRIPTION
G1
4" X1 1 2" Bolt Arm
STEP 1: Align the seat frame (2) with the chair back (1) and then loosely attach the seat
frame (2) to the chair back(1) using flat washer (D), lock washer (E) and bolt (A).
STEP 2: Continue (loose) assembly of the seat frame (2) to the chair back (1) using flat
washers (D), lock washers (E), and bolts (B) through the corner blocks at the back of the
seat frame (2).
2

ASSEMBLY INSTRUCTIONS
UPH. BACK SIDE CHAIR
245202-1707
8/6/2015
! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE !
Page 2
STEP 3: Assemble the front legs (3) to the seat frame (2) using flat washers (D), lock
washers (E) and nuts (F).
STEP 4: Loosely assemble the arms(4) and the chair back(1) using bolts(G). Then attach
the arms(4) and the seat frame(2) securely using flat washers(D), lock washers(E)and
bolts(G).
STEP 5: Tighten ALL bolts securely.
NOTE: Do NOT over tighten the bolts as it may cause damage to the chair.