A.S.HELSINGO Ingaro User manual

Wardrobes Mounting Instructions /
Ingarö, Ensiö, Samsö
Before you begin
Please read these instructions carefully before you start assembling your new wardrobe:
– Our wardrobes are easy to assemble, but you need to have basic skills in using tools such as an electric
screwdriver and clamps.
– Make sure you have assembled the IKEA PAX cabinet frames correctly, according to IKEA’s instructions.
– Do check carefully that the cabinet frames are straight to ensure a beautiful result.
– Assemble the wardrobe on a smooth and even surface, preferably on a thin carpet close to the area you
are planning to place it. We also recommend having help, to minimize the risk of damaging any of the parts.
Tools needed
Electric screwdriver Bits (T20) 2 x Clamps Tape measure
Wardrobe styles
Our assembly instructions are style specific, not model specific. All the wardrobe models, INGARÖ, ENSIÖ,
and SAMSÖ come in two frame styles shown on the following pages. Each style has specific mounting in-
structions. You will find the style of your wardrobe from the order confirmation.

Disclaimer
Suggestions in these mounting instructions are provided for informational purposes only. A.S.Helsingö does
not guarantee the efficacy of the instructions, as unforeseen variables, such as the existing wall, ceiling and
flooring conditions, and alternative designs, may render these suggestions moot. Equally, A.S.Helsingö does
not guarantee that this information is up to date. For questions concerning IKEA products, specifications, or
utilizations, please refer to IKEA’s manuals and instructions.

General Safety Guidelines
– Read all IKEA’s and A.S.Helsingö’s assembly instructions carefully before beginning the installation. Failure
to follow the instructions may result in property damage, bodily injury, or loss of life.
– Read all safety instructions carefully for the tools that you use in the installation.
– Be aware of water and power lines when drilling into walls.
– Secure the bathroom cabinet to the wall, regardless of whether you have legs on the furniture or not. If you
are uncertain about the ability of the wall to support heavy weights, we recommend that you add legs to your
cabinet.
– Lift all items carefully, especially heavy parts.
– Keep children away.

1. Attach the IKEA cabinet frames using four screws.
Width
Screws (4 x 30 mm)
Doors
Side panels
Width
Screws (4 x 30 mm)
Doors
Side panels
100 cm
12
2
2
250 cm
24
5
2
150 cm
20
3
2
300 cm
24
6
2
200 cm
20
4
2
2. Install the side panels. They should stand out of the front of
the cabinet frame by 21 mm.
Style: Plain
How it will look
Contents
Front view Back view
Front side of
the cabinet frame
Side panel
21 mm
Please note that the design varies slightly depending on the
selected model and the size of your sideboard.
Safety
Please always follow the safety instructions that apply to your IKEA
products, especially when securing the cabinet to the wall. It’s
essential as the weight distribution changes when the doors are
open. Use the anchor brackets provided with the IKEA cabinets.

3. Secure the wardrobe to the wall using brackets and mounting
screws, according to IKEA’s instructions.
4. Install the hinges following IKEA’s instructions. Then attach
the doors.
5. Install the handles or push-open handles on your wardrobe
following the mounting instructions provided with the handles.
A.S.Helsingö
handle mounting
instructions
IKEA PAX IKEA
KOMPLEMENT

1. Attach the IKEA cabinet frames using four screws (45 mm).
Install the spacer panels between the cabinets. They should
stand out of the cabinet frame by 30 mm.
2. Install the side panels. They should stand out of the front of
the cabinet frame by 30 mm.
Width
Screws (4 x 30 mm)
Screws (4 x 30 mm)
Doors
Side panels
Top panels
Spacer panels
Width
Screws (4 x 30 mm)
Screws (4 x 30 mm)
Doors
Side panels
Top panels
Spacer panels
100 cm
20
4
2
2
1
1
250 cm
24
16
5
2
2
4
150 cm
22
8
3
2
1
2
300 cm
24
20
6
2
2
5
200 cm
22
12
4
2
1
3
Style: Spacer Panel
How it will look
Contents
Front view Back view
Please note that the design varies slightly depending on the
selected model and the size of your sideboard.
Front side of
the cabinet frame
Side panel
21 mm
Safety
Please always follow the safety instructions that apply to your IKEA
products, especially when securing the cabinet to the wall. It’s
essential as the weight distribution changes when the doors are
open. Use the anchor brackets provided with the IKEA cabinets.

3. Install the top panel. It should stand out of the front of the
cabinet frame by 30 mm.
5. Install the hinges following IKEA’s instructions. Then attach
the doors.
6. Install the handles or push-open handles on your wardrobe
following the mounting instructions provided with the handles.
4. Secure the wardrobe to the wall using brackets and mount-
ing screws, according to IKEA’s instructions.
IKEA
KOMPLEMENT
A.S.Helsingö
handle mounting
instructions
IKEA PAX
Front side of
the cabinet frame
Top panel
30 mm

We are happy to help! Email or call us for further assistance:
[email protected] [phone]