A1 Security Cameras AXIS M1045/65-LW User manual
AXIS M1045/65–LW Network Camera
Installation Guide
Available from A1 Security Cameras
Legal onsiderations
Video and audio surveillance can be regulated by
laws that vary from country to country. Check the
laws in your local region before using this product
for surveillance purposes.
This product includes the following licences:
•one (1) C decoder license
•one (1) H.264 decoder license
To purchase further licenses, contact your reseller.
Liability
Every care has been taken in the preparation of this
document. Please inform your local xis ofce of
any inaccuracies or omissions. xis Communications
B cannot be held responsible for any technical or
typographical errors and reserves the right to make
changes to the product and manuals without prior
notice. xis Communications B makes no warranty
of any kind with regard to the material contained
within this document, including, but not limited to,
the implied warranties of merchantability and tness
for aparticular purpose. xis Communications B
shall not be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Intelle tual property rights
xis B has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more
of the patents listed at axis.com/patent.htm and
one or more additional patents or pending patent
applications in the US and other countries.
This product contains licensed third-party software.
See the menu item “ bout” in the product’s user
interface for more information.
This product contains source code copyright
pple Computer, Inc., under the terms
of pple Public Source License 2.0 (see
opensource.apple.com/apsl). The source code is
available from developer.apple.com/bonjour/
Equipment modi ations
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no user-serviceable components. Unauthorized
equipment changes or modications will invalidate
all applicable regulatory certications and approvals.
Trademark a knowledgements
XIS COMMUNIC TIONS, XIS and V PIX are
registered trademarks or trademark applications of
xis B in various jurisdictions. ll other company
names and products are trademarks or registered
trademarks of their respective companies.
pple, Boa, pache, Bonjour, Ethernet, Internet
Explorer, Linux, Microsoft, Mozilla, Real, SMPTE,
QuickTime, UNIX, Windows, Windows Vista and
WWW are registered trademarks of the respective
holders. Java and all Java-based trademarks and
logos are trademarks or registered trademarks of
Oracle and/or its afliates. The UPnP Word Mark
and UPnP Logo are trademarks of Open Connectivity
Foundation, Inc. in the United States or other
countries.
WP , WP 2 and Wi-Fi Protected Setup are marks of
the Wi-Fi lliance.
Regulatory information
Europe
This product is intended for indoor use only.
This product complies with the applicable CE marking
directives and harmonized standards:
• Electromagnetic Compatibility (EMC) Directive
2014/30/EU. See Electromagnetic compatibility
(EMC) on page 19.
• Radio Equipment Directive (RED) 2014/53/EU.
See Radio transmission on page 0.
• Low Voltage (LVD) Directive 2014/35/EU. See
Safety on page 1.
• Restrictions of Hazardous Substances (RoHS)
Directive 2011/65/EU. See Disposal and
recycling on page 1.
copy of the original declaration of conformity
may be obtained from xis Communications B. See
Contact information on page .
Ele tromagneti ompatibility (EMC)
This equipment has been designed and tested to fulll
applicable standards for:
• Radio frequency emission when installed
according to the instructions and used in its
intended environment.
• Immunity to electrical and electromagnetic
phenomena when installed according to
the instructions and used in its intended
environment.
USA
This equipment has been tested using ashielded
network cable (STP) and found to comply with the
limits for aClass Bdigital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
aresidential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in aparticular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
Available from A1 Security Cameras
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
The product shall be connected using ashielded
network cable (STP).
Canada
This digital apparatus complies with
C N ICES-3 (Class B). The product shall be
connected using ashielded network cable (STP).
Cet appareil numérique est conforme àla norme
C N NMB-3 (classe B). Le produit doit être connecté
àl'aide d'un câble réseau blindé (STP).
Europe
This digital equipment fullls the requirements for RF
emission according to the Class Blimit of EN 55032.
The product shall be connected using ashielded
network cable (STP).
This product fullls the requirements for immunity
according to EN 61000-6-1 residential, commercial
and light-industrial environments.
This product fullls the requirements for immunity
according to EN 61000-6-2 industrial environments.
This product fullls the requirements for immunity
according to EN 55024 ofce and commercial
environments.
Australia/New Zealand
This digital equipment fullls the requirements
for RF emission according to the Class Blimit of
S/NZS CISPR 32. The product shall be connected
using ashielded network cable (STP).
Japan
この装置は、クラスB 情報技術装置です。こ
の装置は、家庭環境で使⽤することを⽬ 的
としていますが、この装置がラジオやテレビ
ジョン受信機に近接して使⽤されると、 受信
障害を引き起こすことがあります。 取扱説明
書に従って正しい取り扱いをして下さい。 本
製品は、シールドネットワークケーブル(STP)
を使⽤して接続してください。また適切に
接地してください。
Korea
이기기는 가정용(B급) 전자파적합기기로서
주로 가정에서 사용하는 것을 목적으로 하며,
모든 지역에서 사용할 수있습니다. 적절히
접지된 STP (shielded twisted pair) 케이블을
사용하여 제품을 연결 하십시오.
Radio transmission
This equipment may generate or use radio frequency
energy. The user could lose the authority to operate
this equipment if an unauthorized change or
modication is made.
USA
This equipment complies with the limits for aClass B
digital device, pursuant to part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesirable operation.
This product complies with FCC radiation exposure
limits for an uncontrolled environment. This
equipment shall be installed and operated with a
minimum distance of 20 cm (7.9 in) between the user
and the device.
Canada
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may
not cause interference, and (2) this device must
accept any interference, including interference that
may cause undesired operation of the device.
This product complies with IC radiation exposure
limits for an uncontrolled environment. This
equipment shall be installed and operated with a
minimum distance of 20 cm (7.9 in) between the
user and the device. This device for operation in the
frequency band 5150-5250 MHz is only for indoor
use to reduce the potential for harmful interference
to co-channel mobile satellite systems.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux
conditions suivantes :(1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil
doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Ce produit est conforme aux limites d'exposition aux
radiations IC pour un environnement non contrôlé.
L’équipement doit être installé et fonctionné àune
distance minimum de 20 cm (7,9 po) entre l’utilisateur
et le dispositif. Dans la bande de fréquences de
5150 à5250 MHz, cet appareil doit uniquement
être utilisé àl’intérieur an de réduire le risque de
brouillage préjudiciable de systèmes de service mobile
par satellite se trouvant dans le même canal.
Europe
Hereby, xis Communications B declares that
this product is in compliance with the essential
requirements and other relevant provisions of
Directive 2014/53/EC.
FR
Par la présente xis Communications B déclare que
l’appareil ce produit est conforme aux exigences
essentielles et aux autres dispositions pertinentes de
la directive 2014/53/CE.
DE
Hiermit erklärt xis Communications B, dass
sich dieses Produkt in Übereinstimmung mit den
grundlegenden nforderungen und den anderen
relevanten Vorschriften der Richtlinie 2014/53/EG
bendet.
Available from A1 Security Cameras
Table of contents
Other A1 Security Cameras Security Camera manuals
A1 Security Cameras
A1 Security Cameras AXIS M20-LE Series User manual
A1 Security Cameras
A1 Security Cameras XNP-6120H User manual
A1 Security Cameras
A1 Security Cameras AXIS M1065-L User manual
A1 Security Cameras
A1 Security Cameras AXIS Q35 Series User manual
A1 Security Cameras
A1 Security Cameras Uniview IPC2125LR3-PF40M-D User manual
A1 Security Cameras
A1 Security Cameras AXIS Q3515-LV User manual
