A4Tech ViewCam PK-335 User manual

ViewCam
User smanual
Model :PK-335
www.a4tech.com

1
Contentspage
Introduction 2
Systems Requirements 2
Package Include2
USB PC Camera 3
Specification3
Installing Cameras Driver 4
Checking connection of your camera10
Uninstalling Driver 11
VP-EYE program11
Troubleshooting19

2
lIntroduction
Welcome to the World ofDigital Imaging.
The followinginformationwill guide you to install anduse the PC
Camera to its full capabilities.
lSystem s requirements
Personal Computer, Laptop, Desktop, or IBM Compatible
Computer with Pentium166MHzminimum, and with an active
USB (universal serial bus) port.
Windows 98/ME/2000/XP,CD-ROM drive, color monitor, mouse
and keyboard. For videoconference, Internet connection must
be equipped.
lPackage includes
PC Camera
(With USB cable and Mic. Jack)
CD Installation Disc

3
lUSB PC Camera
lSpecification
Image Sensor: 1/4 CMOS,640×480pixels
Frame Rate:
30fps@640x480, @600x800, @320x240,
@160x120
Lens: F=2.0, f=3.6mm
ViewAngle: 72 degree
Focus Range: Automatic focus, 10cmto infinity
Exposure Control: Automatic
White Balance: Automatic
Still ImageCapture
Res.:
800x600，640X480，352x288，320x240，176x144，
160x120
Flicker Control: 50Hz, 60Hz and None
5-Layer
Lens
Microphone

4
Microphone Built in Microphone
Computer Port USB port
●Installing camera s driver
Driver s Installation Instruction for Windows 98/ME/2000/XP
NOTE: Please Uninstall All Previous Installed WEBCAM BEFORE Installing A4 TECH
ViewCAM. DO NOT CONNECT A4 TECH ViewCAM TO THE COMPUTER UNTIL ITS
DRIVER IS INSTALLED!
1. Insert the includedCD into the CD-ROM: The Autorun Menu
Window will popup, movethe mouse cursor to and clickon
“Install viewCAM”.

5
2. Pleaseselect your ViewCAM modeland clickon the product
imageto install (As theright image). Thendialogue box will
appear on the computer screen as below:
3. Follow the on screeninstruction to complete theinstallation
process

6
4. When theInstallationProcess is completed, restart the
Computer.

7
6. Click “Finish”to complete installation. Now,the shortcut
Amcap image will appear on the computer desktop
7. Plugthe PC CamerasUSB cable to the computer sUSB
Port, and restart your computer.
Amcap Usage
After installationof ViewCAM driver,you can pre-view image
and set the adjustments for the properties sheet through the
included image application software.
Image-preview
Clickon the icon on the
desktop and the Amcap image
application will pop-up.
Or clickon “start”,select “Program”,
then select “A4TECH USB PC
Camera”, and select “Amcap”to
open theAmcap application. (you
mayfollow the image on the right)

8
if Amcapimage fails to appear pleasego to “Options”and select
“Preview”
(Refer to the diagram below)
Device description
Go to “Devices”and select “A4 Tech USB PC Camera”.
(Refer to below diagram)

9
Properties page configuration
Go to “Options”, then select “Video Capture Filter…”
(Refer to below diagram
The Properties configuration page as below wills pop-up: