A4Tech ViewCam Pro PK-335 User manual

Model: PK-335

1
Contents page
Introduction 2
System s Requirements 2
Package Include 2
I. USB PC Camera3
II. Specification 3
III. Installing Camera s Driver 4
IV. Checking connection of your camera10
V. Uninstalling Driver 10
VI. Ulead photo express 11
VII. Ulead cool 360 12
VIII. Troubleshooting 13

2
Introduction
Welcome to the World of Digital Imaging.
The following information will guide you to install and use the PC Camera to
its fullcapabilities.
System s requirements
•Personal Computer,Laptop, Desktop, or IBM Compatible Computer
with Pentium 166MHz minimum, and with an active USB
(universal serial bus) port.
•Windows 98/ME/2000/XP,CD-ROM drive, color monitor,mouse
and keyboard. For videoconference, Internet connection must be
equipped. Sound card with standard microphone input port.
Package includes
PC Camera
(With USB cable and Mic. Jack)
CD Installation Disc

3
I. USB PC Camera
II. Specification
Image Sensor: 1/4 CMOS, 640×480pixels
Frame Rate: 30fps@640x480, @600x800, @320x240, @160x120
Lens: F=2.0, f=3.6mm
ViewAngle: 72 degree
Focus Range: Automatic focus, 10cmto infinity
Exposure Control: Automatic
White Balance: Automatic
StillImage Capture Res.: 600x800, 640X480, 352x288, 320x240, 160x120
Microphone Built in Microphone
Flicker Control: 50Hz, 60Hz and None
Computer Port USB port and Audio port
5-LayerGlass Lens Microphone

4
.Installing camera s driver
Driver sInstallation InstructionforWindows 98/ME/2000/XP
NOTE: Please Uninstall All Previous InstalledWEBCAM
BEFORE Installing A4 TECH ViewCAM. DO NOT
CONNECT A4 TECH ViewCAMTO THE COMPUTER
UNTIL ITS DRIVER IS INSTALLED!
1. Insertthe included CD into the CD-ROM:
The Autorun Menu Windowwill popup, move
the mouse cursor toand click on “Install
viewCAM”.
2. Please select your ViewCAM model and
click on the productimage to install (Asthe
right image). Then dialoguebox will appear
on the computer screen as below:

5
3. Followthe on screen instruction to complete the installation process

6
4. When the Installation Process is completed, restart the Computer.
6.Click “Finish”to complete installation. Now,the shortcut Amcap image will
appear on the computer desktop
7. Plug the PCCamera sUSB cable to the computer sUSBPort, and restart your
computer.
Amcap Usage
After installation of ViewCAM driver,you can pre-view image and setthe
adjustments for theproperties sheet through the includedimage application
software.

7
Image-preview
Click on the icon on the desktop and the
Amcap image application will pop-up.
Or click on “start”,select “Program”,then
select “A4TECH USB PCCamera”,and
select “Amcap”to openthe Amcap
application. (you may followthe image on
the right)
if Amcap image fails to appear please go to “Options”and select “Preview”
(Refer to the diagram below)

8
Device description
Go to “Devices”and select “A4 Tech USB PC Camera”.
(Refer to belowdiagram)
Properties page configuration
Go to “Options”, then select “Video Capture Filter ”
(Refer to below diagram）

9
The Properties configuration page as below wills pop-up:
Most settings can be adjusted here.