Aaeon FWS-7360 User manual

Last Updated: June 19, 2018
FWS-7360
Network Appliance
User’s Manual 1st Ed

Preface II
Network Appliance FWS-7360
Copyright Notice
This document is copyrighted, 2018. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.

Preface III
Network Appliance FWS-7360
Acknowledgement
All other products’ name or trademarks are properties of their respective owners.
Microsoft Windows is a registered trademark of Microsoft Corp.
Intel, Pentium, Celeron, and Xeon are registered trademarks of Intel Corporation
Core, Atom are trademarks of Intel Corporation
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
All other product names or trademarks are properties of their respective owners.

Preface IV
Network Appliance FWS-7360
Packing List
Before setting up your product, please make sure the following items have been
shipped:
Item
Quantity
FWS-7360
1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.

Preface V
Network Appliance FWS-7360
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver installation
instructions (if any), to facilitate users in setting up their product.
Users may refer to the AAEON.com for the latest version of this document.

Preface VI
Network Appliance FWS-7360
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. All cables and adapters supplied by AAEON are certified and in accordance with
the material safety laws and regulations of the country of sale. Do not use any
cables or adapters not supplied by AAEON to prevent system malfunction or
fires.
3. Make sure the power source matches the power rating of the device.
4. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
5. Always completely disconnect the power before working on the system’s
hardware.
6. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
7. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
8. Always disconnect this device from any AC supply before cleaning.
9. While cleaning, use a damp cloth instead of liquid or spray detergents.
10. Make sure the device is installed near a power outlet and is easily accessible.
11. Keep this device away from humidity.
12. Place the device on a solid surface during installation to prevent falls
13. Do not cover the openings on the device to ensure optimal heat dissipation.
14. Watch out for high temperatures when the system is running.
15. Do not touch the heat sink or heat spreader when the system is running
16. Never pour any liquid into the openings. This could cause fire or electric shock.

Preface VII
Network Appliance FWS-7360
17. As most electronic components are sensitive to static electrical charge, be sure to
ground yourself to prevent static charge when installing the internal components.
Use a grounding wrist strap and contain all electronic components in any
static-shielded containers.
18. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
19. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH
TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES
(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VIII
Network Appliance FWS-7360
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received including interference that may cause
undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions and your local government’s recycling or
disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.
Recycler les batteries usées en accord avec les instructions du fabricant et les directives
gouvernementales de recyclage.

Preface IX
Network Appliance FWS-7360
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含量
AAEON Embedded Box PC/ Industrial System
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
○
○
○
○
○
○
外部信号
连接器及线材
○
○
○
○
○
○
外壳
○
○
○
○
○
○
中央处理器
与内存
○
○
○
○
○
○
硬盘
○
○
○
○
○
○
电源
○
○
○
○
○
○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质中央处理器、内存、硬盘、光驱、触控模块为选购品。

Preface X
Network Appliance FWS-7360
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
AAEON Embedded Box PC/ Industrial System
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components
O
O
O
O
O
○
Wires &
Connectors
for External
Connections
O
O
O
O
O
O
Chassis
O
O
O
O
O
O
CPU & RAM
O
O
O
O
O
O
Hard Disk
O
O
O
O
O
O
PSU
O
O
O
O
O
O
O：The quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the
component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under normal
usage only

Preface XI
Network Appliance FWS-7360
Table of Contents
Chapter 1 - Product Specifications.......................................................................................... 1
1.1 Specifications............................................................................................................ 2
Chapter 2 –Hardware Information ....................................................................................... 5
2.1 Dimensions ............................................................................................................... 6
2.2 Jumpers and Connectors....................................................................................... 9
2.3 Jump Settings.......................................................................................................... 11
2.3.1 Auto Power Button (JP1)............................................................................ 11
2.3.2 Clear CMOS (CN10) ................................................................................. 11
2.4 Connector Pin Assignments.................................................................................12
2.4.1 Front Panel (FP1)..........................................................................................12
2.4.2 CASEOPEN Pin Header (CN8)...............................................................12
2.4.3 LCM KeyPad Header (CN9)....................................................................12
2.4.4 Digital IO Pin Header (CN14).................................................................12
2.5 Installing the 2.5”x2 Hard Disk Driver.................................................................14
Chapter 3 - AMI BIOS Setup .................................................................................................18
3.1 System Test and Initialization ...............................................................................19
3.2 AMI BIOS Setup .....................................................................................................20
3.3 Setup Submenu: Main...........................................................................................21
3.4 Setup Submenu: Advanced.................................................................................22
3.4.1 Advanced: Trusted Computing...............................................................23
3.4.2 Advanced: Serial Port Console Redirection .......................................25
3.4.2.1 COM0 Console Redirection.......................................................26
3.4.2.2 Legacy Console Redirection Settings......................................28
3.4.2.3 Console Redirection Settings....................................................29
3.4.3 Advanced: USB Configuration...............................................................31
3.4.4 Advanced: SIO Configuration...............................................................32

Preface XII
Network Appliance FWS-7360
3.4.4.1 Serial Port Configuration............................................................33
3.4.5 Advanced: Hardware Monitor ..............................................................34
3.4.6 Advanced: LAN Bypass Configuration................................................36
3.4.7 Advanced: Power Management...........................................................37
3.4.8 Advanced: Digital IO Port Configuration ...........................................38
3.5 Setup submenu: Security .....................................................................................39
3.6 Setup submenu: Boot...........................................................................................40
3.7 Setup submenu: Save & Exit ................................................................................41
3.8 Setup submenu: IntelRCSetup............................................................................42
3.8.1 IntelRCSetup: Processor Configuration.................................................43
3.8.2 IntelRCSetup: Server ME Configuration .............................................44
3.8.3 IntelRCSetup: North Bridge Chipset Configuration .........................45
3.8.4 IntelRCSetup: South Bridge Chipset Configuration .........................46
3.8.4.1 SATA Configuration......................................................................47
Chapter 4 –Drivers Installation............................................................................................ 50
4.1 Driver Installation....................................................................................................51
Appendix A - Watchdog Timer Programming................................................................... 52
A.1 Watchdog Timer Initial Program........................................................................53
Appendix B - I/O Information .............................................................................................. 59
B.1 I/O Address Map ...................................................................................................60
B.2 Memory Address Map .........................................................................................62
B.3 IRQ Mapping Chart...............................................................................................64
Appendix C –Standard LAN Bypass Platform Setting...................................................... 78
C.1 Status LED ...............................................................................................................79
C.1.1 Introduction.................................................................................................79
C.1.2 Status LED Configuration.......................................................................79
C.1.3 Sample Code............................................................................................80
C.2 LAN Bypass.............................................................................................................82

Preface XIII
Network Appliance FWS-7360
C.2.1 Introduction..............................................................................................82
C.2.2 LAN Bypass Configuration ....................................................................82
C.2.3 Sample Code............................................................................................84
C.3 Software Reset button (General Propose Input).............................................86
C.3.1 Introduction..............................................................................................86
C.3.2 LAN Bypass Configuration ....................................................................86
C.3.3 Sample Code............................................................................................87

Network Appliance FWS-7360
Chapter 1
Chapter 1 - Product Specifications

Chapter 1 –Product Specifications 2
Network Appliance FWS-7360
1.1 Specifications
Platform
Form Factor
1U Rackmount Network Platform
Processor
Intel® Denverton C3000 Series C3758 C3858
C3958
Chipset
SoC
System Memory
DDR4 U-DIMM ECC DIMM Up to 64GB
Network
Ethernet
Intel® i211 Gigabit Ethernet x 2 , Marvell
88E1543 x 1(2 Port RJ45)
SFP+ from CPU
Bypass
2 Pairs
NIM Slot
1
Display
Graphics Controller
-
Connector
VGA Option
Storage
HDD
Internal 2.5” HDD x 2
CF/CFast/mSATA
mSATA maxima x 2 (Option)

Chapter 1 –Product Specifications 3
Network Appliance FWS-7360
Expansion / Internal Interface
PCIe Slot
NIM x 1 or PCIe [x8] x 1
Mini Card
Mini PCIe maxima x 2 (Option)
IPMI
-
Keyboard and Mouse
-
USB
USB 3.0 x 2
Miscellaneous
RTC
Internal RTC
Watchdog Timer
1~255 steps by software programmable
Software Button
-
TPM
Optional
GPIO
-
Fan
1
MTBF (Hours)
TBD
Color
Black
Physical & Environmental Spec
Power Requirement
TBD
Operating Temperature
32°F ~ 104°F (0°C ~ 40°C)
Storage Temperature
-4°F ~ 140°F (-20°C ~ 60°C)

Chapter 1 –Product Specifications 4
Network Appliance FWS-7360
Operating Humidity
10 ~ 80%
Storage Humidity
10 ~ 80% @ 40°C, non-condensing
Vibration
0.5 Grms/ 5 ~ 500Hz/ operation (3.5” H.D.D)
1.5 Grms/ 5 ~ 500Hz/ no operation
Shock
10G peak acceleration (11 m sec. duration),
operation
20G peak acceleration (11 m sec. duration),
non-operation
Dimension (W x D x H)
430mm x 305mm x 44mm
I/O Interface
Front Panel
Power LED x 1 ADD Bypass LED x 2
Status LED x 1
HDD Active LED x 1
Rear Panel
AC Power Input x 1
Power Switch x 1
VGA port (Optional)
Rear Expansion Slot x 1(Optional)

Network Appliance FWS-7360
Chapter 2
Chapter 2 –Hardware Information

Chapter 2 –Hardware Information 6
Network Appliance FWS-7360
2.1 Dimensions
System

Chapter 2 –Hardware Information 7
Network Appliance FWS-7360
Component Side