ABBA CDR85 User manual

CDR85
www.ABBALightingUSA.com
INSTALLATION GUIDE

IMPORTANT SAFETY INSTRUNCTIONS
LIGHTEN LAMP IS HOT!
WARNING: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS:
Lamp gets HOT quickly!
Do not touch HOT lens, guard or enclosure.
Keep lamp away from materials that may burn.
Do not touch the lamp any time. Use soft cloth.
RATED VOLTAGE 12 AC/DC
Thank you for purchasing this quality product. To ensure correct function and
safety, Please read and follow all instructions carefully before assembly,
installation and before using this product.
WARRANTY
This fixture is covered by a 2 year warranty. The warranty is from the date of
purchase, not the date of installation. Please keep the proof of purchase
Warranty will be void if there is any damage due to improper usage or
modification to the fixture.
Failure to comply with the instruction in this manual may increase the risk of
damage or injury and will void warranty.
It is recommended only qualified persons to install this electrical product.
Before attempting to install this unit, ensure all power connections are off for
your own safety.
www.ABBALightingUSA.com

Do not instal within 10 feet of a pool, spa or fountain
CAUTION:
fixture(s) must be installed in accordance with all local codes and ordinances.
INSTALLATION INSTRUCTION
fixture(s) should be used "ONLY" with
low voltage landscape power units
that do not exceed 25A, 15V.
The main cable from power units
should be buried for less than 6 inches
under the ground level.
1. Please ensure the light cable wires
input are 12v ac/dc.
2. Turn off power before installation.
3. Attach the fixture(s) wires to the
main cable connector suitable for
direct burial. Use waterproof wire
nuts. WN12 (Sold separately).
4. Put the spike into the ground. Try to
make firm vertical mounting.
5. Adjust the light angle.
6. Turn on power.
WN12 (Sold separately)
Main Line
Connect the wires using
www.ABBALightingUSA.com