ABBlighting V-Line User manual

Add: 1501 Industrial Way North, Toms River, NJ 08755 Phone: 866-ABB-8866 E-mail: [email protected]
Web: www.abblighting.com ©2015 ABBlighting, Inc. All rights reserved
Add: 1501 Industrial Way North, Toms River, NJ 08755 Phone: 866-ABB-8866 E-mail: [email protected]
Web: www.abblighting.com ©2015 ABBlighting, Inc. All rights reserved
LED V-LINE FLOOD LIGHT
Instructions Manual
WARRANTY
LIMITED FIVE-YEAR WARRANTY. Should this product fail to perform satisfactorily due to a defect or poor workmanship
within ve years from the date of purchase, return it to the place of purchase and it will be replaced, free of charge.
Incidental or consequential damages are excluded from the warranty.
Slip Fitter
Pole
1. Unsrew to install slip tter rst
2. Rotate xture to appropriate
position, and srew tightly. Fixture
can adjust 180˚
3. Insert slip tter to the pole
1. Unsrew to install slip tter rst.
2. Rotate xture to appropriate position, and srew tightly. Fixture can adjust 180˚.
3. Insert slip tter to the pole.
4
For Universal Slip Fitter
LED V-LINE FLOOD LIGHT
Instructions Manual
SAFETY INSTRUCTION
MAINTENANCE CAUTION
SUITABLE FOR MODEL
WIRE CONNECTION
FOR 26W V-LINE FLOOD LIGHT
Universal voltage driver permits operation at 120V-277V,
50/60Hz
FOR 38W V-LINE FLOOD LIGHT WITH DIMMER
Universal voltage driver permits operation at 120V-277V,
50/60Hz
READ CAREFULLY BEFORE INSTALLING FIXTURE. PLEASE KEEP THIS MANUAL FOR FUTURE USING.
Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding
is required for safety.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
MAKE CERTAIN POWER OFF BEFORE INSTALLING OR MAINTAINING FIXTURE.
CHECK THAT VOLTAGE IS COMPATIBLE WITH FIXTURE DRIVER, USE APPROVED CONNECTORS FOR
ALL ELECTRICAL CONNECTIONS.
1. Review the wire connection before beginning, and make sure xture is grounded properly.
2. For lighting controls, using functioning correctly.
3. Turn power off and wait for xture cooling to operate.
4. Maintenance must be done by professionals.
IMAGE MAY VARY FROM ACTUAL PRODUCT
1

Add: 1501 Industrial Way North, Toms River, NJ 08755 Phone: 866-ABB-8866 E-mail: [email protected]
Web: www.abblighting.com ©2015 ABBlighting, Inc. All rights reserved
Add: 1501 Industrial Way North, Toms River, NJ 08755 Phone: 866-ABB-8866 E-mail: [email protected]
Web: www.abblighting.com ©2015 ABBlighting, Inc. All rights reserved
INSTALLATION
FOR 52W V-LINE FLOOD LIGHT WITH DIMMER
Universal voltage driver permits operation at 120V-277V,
50/60Hz
FOR 80W & 100W V-LINE FLOOD LIGHT WITH DIMMER
Universal voltage driver permits operation at 120V-277V,
50/60Hz
EXPLODED DRAWING
LED V-LINE FLOOD LIGHT
Instructions Manual
GROUND GROUND
LED
BOARD
RED(+)
RED
(DC+)
BLACK
(DC-)
BLACK(-)
POWER
DIMMER
ACN(WHITE)
ACL(BLACK)
N
L
DIM+(PURPLE)
DIM-(GRAY)
VAUX/12V
(YELLOW)
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
GROUND
N
L
DIM+(BLUE)
RED(+)
RED
(DC+)
BLACK
(DC-)
BLACK(-)
DIM-(WHITE) DIMMER
ACN(BLUE)
GREEN/YELLOW
ACL(BROWN)
LED
BOARD
POWER
Power Supply Cover
Photo Control
Trunnion
Power Supply
Body
Reector
Glass
Frame
2
Ref#: AB100291-11214
INSTALLATION
1. Using two srews to install trunnion to appropriate position.
2. Rotate xture to appropriate position, and srew tightly. Fixture can adjust 180˚.
1. Screw Knuckle to the pole.
LED V-LINE FLOOD LIGHT
Instructions Manual
Trunnion
1. Using two srews to install trunnion to
appropriate position
2. Rotate xture to appropriate position, and srew
tightly. Fixture can adjust 180˚
OPTION 1: TRUNNION MOUNTING INSTALLATION
1. Screw knuckle to
the pole
3
For 26W, 38W, 52W Knuckle
OPTION 2: SLIP FITTER & KNUCKLE INSTALLATION