Abbyson iTable mini User manual

 
 
www.Abbyson.com
USER
MANUAL
iTable miniTM

 
 
Thank you for purchasing the iTable mini .
Be sure to check all packing material carefully
for small parts that may have come loose
inside the carton during shipment. Before
using, please read this operation manual
thoroughly in order to understand the correct
methods of usage, especially taking note of
the section on safety, it is important. This
manual should be kept on hand for easy
reference. It is your guidance to a safe and
ecient operation. Using the product
properly could prolong the life.
TM

Please use the original power
supply provided.
Never operate the unit if it has a
damaged cord or plug.
Please unplug it and contact the store if
it is not working properly, if it has been
dropped or damaged, or if it has been
immersed in water.
Keep power cords away from heated
surfaces and never use it if it has a
damaged cord.
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
Do not drop or insert anything into any of
the openings on the unit.
Liquids should not be spilled on the
control panel.
Indoor use only, do not put it into direct
sunlight exposure.
The unit contains no user-serviceable
parts and opening or disassembling any
parts of it may cause an electric
shock or injury.
Children should be supervised.
•
•
•
•
•
•
•
•
•
•
CAUTION
1

2
CONTROL PANEL
 Power: ON/OFF. All switch LED will illuminate when ON.
 Audio Control Panel: Bluetooth, Play/Pause, Previous Track, Next Track,
Volume -, Volume +
 Headphone Jack.
 USB Outlet: Connect your smart device to the USB.
 Aux Port.
 Bluetooth Indicator: Flashes quickly when it is standby for Bluetooth
paring. Flashes slowly when it searches for another iTable mini. Keeps
illuminating when it is paired successfully.
 Wireless Charging Pad: To charge your device, place your cellphone in
the center on the control panel
 Speaker: Audio player speaker.
 Reclining buttons
H
M1 M2 M3
⑨

3
BLUETOOTH AUDIO PLAYER
Operation Guidance
Bluetooth Paring
Touch and hold to pair one iTable mini
to another one.
Touch and hold to cut o the Bluetooth
connection between two iTabe minis.
The previous track.
The next track.
Decrease volume.
Increase volume.
Tap to play or pause.
Touch and hold to disconnect the
Bluetooth connection with the
previous device.
Pair iTable mini to smart device
 Power ON the device by holidng the
 Go to your device setting, search for “Bluetooth” setting.
Select “iTable Mini” from the list of devices from the list of devices
 iTable will announce “Paired-Speaker Connected”

4
BLUETOOTH AUDIO PLAYER
WIRELESS CHARGING PAD
Place your cell phone on the iTable mini
it will charge the phone automatically.
If it is charging, there will be a solid blue LED ring.
If you have a sectional with two iTable minis you have the option to pair
them so that music can be played through both speakers.
Double Unit Pairing:
 Touch and hold both iTable Mini for a few seconds; the
indicators will flash slowly, then the iTable minis will connect
 The iTable Minis will announce “Paired”

No power
No sound
at all
The Bluetooth
can not
be paired
AUX mode is
not working
The wireless
charging pad
doen’t work
1. Ensure the unit is powered on . Touch and hold
2. The power cord isn't plugged properly. Re-plug it.
1. The volume is at the minimum setting. Touch to increase the volume.
2. The unit is at headphone setting. Unplug the headphone.
1. It has been connected to another device. Touch and hold to
disconnect the previous device, then try to connect it.
2. Your device might be out of range.
1. Your device may not support this kind of AUX jack
2. The Aux cable is broken. Try another one.
1. Your device does not support wireless charging
2. Check that your phone is aligned with the
5
TROUBLESHOOTING

 
 
www.Abbyson.com