ABC IT ABC S-M2080 User manual

1
User Manual
ABC-Industrial Switch
ABC S-M2080
14/2018

2
© Copyright 2003-2016 by ABC IT, Ahrens & Birner Company GmbH
Virchowstraße 19/19a
D-90409 Nuremberg
Fon [phone]
Fax [phone]
mailto:m[email protected]
http://www.abcit.eu/
Contents
ABC S-M2080......................................................................................................................................3
1. FEATURES.................................................................................................................................3
2. LEDs Behavior..........................................................................................................................3
3. Port Connection Diagram....................................................................................................4
4. Power Connection Diagram................................................................................................4
5. Factory Default (for WEB management)..........................................................................4
6. Startup and Login ..................................................................................................................5
7. Online Help..............................................................................................................................6

3
ABC S-M2080
1. FEATURES
•Protocol: IEEE802.3 10/100/1000M
•Electrical Ports: 8 x 1000M RJ45 ports and CAT5 cable is used
•Optical Ports: 2 x 100M/1000M Auto Negotiation SFP port
•Input Voltage: Dual Redundant DC18~36V
•Power consumption: <9W
•Size: 180mm (L) x 174mm (W) x42mm (H)
•Weight: <0.65KG
•Operating Temperature: -40℃~75℃
•Humidity: 5%~95%, No Condensation
2. LEDs Behavior
Power（PWR）
Green LED on when power on
System（SYS）
Green LED flashes when the
device is normal
Green LED off when the device is
abnormal
TP port （From 1 to 8）
Green LED on while Signal links
Green LED flashes while receiving
and sending data
1000M Optical Port
（From 9 to 10）
Green LED on while Signal links
Green LED flashes while receiving
and sending data
[NOTE]:
In order to achieve the nominal electromagnetic compatibility, please use the shielded
twisted pair cable.
In order to avoid damage to internal surge protection circuit, insulation resistance test
please separate FG and PG.

4
3. Port Connection Diagram
4. Power Connection Diagram
Left: Single DC input cable connection diagram
Right: Dual redundant DC input cable connection diagram
5. Factory Default (for WEB management)
IP Address: 192.168.2.1
User: admin
Password: system
[NOTE]: To press and hold DEFAULT button for at least 5 seconds to apply factory default settings

5
6. Startup and Login
Open Internet Explorer, input http://192.168.2.1 in the address bar, then the
login interface will display after pressing Enter.
Input the correct user name and password (default user name: admin; default
password: system). The specific configuration page will display after the
successful login.

6
7. Online Help
For more configurations and information of ABC S-M2080, please search in
the Online Help.